terimakasih tuan atas tetoriar nya saya sempat panik waktu bongkra bor tersebut,setelah saya cari di you tube ternyata adab cara pemasanganya,kenalkan nama saya albartos
@Wong Poronogo, glad the video helped. Thanks for watching. Welcome to my channel , please Like and Subscribe and I urge everyone on the comments section to subscribe on your channel as well. Stay safe my friend.
Thank you so much for this video. I was struggling so bad to fit it back together. Only through your video did I learn that I had to have the settings a certain way when re-aligning the two parts. Thank you!!
Hey there @Ballooner. I'm so glad the video helped you out! It can be super tricky to get everything just right, but you nailed it! If you have any more questions or need tips, feel free to ask. Keep up the awesome work, Cheers!
@@handyharvey thank you! I do have one, if you don't mind. The reason I opened it is because the whole chuck wobbles now as it's worn down inside. Is there a way to fix it?
Thankyou very much,I opened my drill,and a lot of parts went to the dolor and I didn't know where wich one had to go,and I found your vídeo,wich saved the life of my drill.
Navaratna Tennekoon This video was really helpful for me in repairing the B-D cordless drill. Where few technicians had disappointed in the past. Thank you very much for your help.🌹🙏🌹🙏🌹
Thank you for this vid. I've just put my BCD700S-18V back together when I was about to give up & buy a new one. Even though I have a different model, the gearbox is identical. Well done.
Mil gracias! me sirvió mucho tu vídeo, mi hijo lo desarmo y ya no lo pude armar de nuevo ya lo había dado por perdida 😢😢😢yo sé que no es de los más caros,pero lo compre con mucho sacrificio.pero gracias adiós que existe gente como tú qué comparten sus conocimientos y gracias a tu vídeo muy explicito lo pude volver a ensamblar ,😃😃😃 gracias dios te bendiga
Great video! Being the fool that I'm I totally forgot to take pictures while disassembling (had to change the motor) and those two plates in the chuck section really left me scratching my head. The good thing about the gears is that they are slightly different in size and cannot be put in wrong places easily.
I have a b&d epc 12 which is drivin me crazy. After opening for a motor problem now mandrel turns free, no torque at all and you can stop with hand with motor at full speed. It’s assembled ok but i noticed that the external big tunnel gearing is free to move. So the problem i think is on the ball bearings... they are in place but very inside the holes... I don’t understand the principe of this gearing system... 😢
Just follow the witness marks left behind by the factory. They're there to help the machine figure out what goes where. You'll see lines, dots, divots and cutaways all over the parts that line up with their accompanying parts.
Yeah mine popped open, catching me out. I got it assembled and everything works... but I have 3 left over parts that I could not place nor find any reference to. I don't understand why my repair worked and it still is. I have clearly made a mistake, Iended up with spares.
@stam230400, I'm so sorry but I don't have. Have you tried searching on Amazon? Anyway, thanks for watching, please like and subscribe if you haven't already. Happy hunting.
Hi @Imam Al Gazali . I'm not sure. I haven't got to it yet. Thanks for watching. If you're new to this channel. Please consider to like, subscribe, and hit the bell icon for more videos. Stay safe my friend.
Hi kazue, I'm not really sure, it will depend on what causes the drill to wobble. Thanks for watching. Please Like, Subscribe and click the bell icon for more videos.
This is not the right way to fix it!!! You will brake it when the drill will be forced. As you can see the very first set of gears has some dots on them which needs to be aligned ( like the car engine timing )
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
terimakasih tuan atas tetoriar nya saya sempat panik waktu bongkra bor tersebut,setelah saya cari di you tube ternyata adab cara pemasanganya,kenalkan nama saya albartos
@Wong Poronogo, glad the video helped. Thanks for watching. Welcome to my channel , please Like and Subscribe and I urge everyone on the comments section to subscribe on your channel as well. Stay safe my friend.
Thank you so much for this video. I was struggling so bad to fit it back together. Only through your video did I learn that I had to have the settings a certain way when re-aligning the two parts. Thank you!!
Hey there @Ballooner. I'm so glad the video helped you out! It can be super tricky to get everything just right, but you nailed it! If you have any more questions or need tips, feel free to ask. Keep up the awesome work, Cheers!
@@handyharvey thank you! I do have one, if you don't mind. The reason I opened it is because the whole chuck wobbles now as it's worn down inside. Is there a way to fix it?
Thanks for sharing this. I did not take a pic of my gears before taking them all out. That was a mistake. But this vid helped!
Thankyou very much,I opened my drill,and a lot of parts went to the dolor and I didn't know where wich one had to go,and I found your vídeo,wich saved the life of my drill.
Glad it helped @JL Cruña. Thanks for watching and good luck on your new born drill. Please like and subscribe. Be safe my friend!
If it was your video, I don’t think I would assemble mine at all. Thank you Sir.
@Ihsan Cetin. You're very welcome, please like and subscribe...cheers!
Navaratna Tennekoon
This video was really helpful for me in repairing the B-D cordless drill. Where few technicians had disappointed in the past. Thank you very much for your help.🌹🙏🌹🙏🌹
My pleasure. Glad it worked. Thanks for watching. Please like, share, and subscribe if you haven't already. Thanks!
Thank you for this vid. I've just put my BCD700S-18V back together when I was about to give up & buy a new one. Even though I have a different model, the gearbox is identical. Well done.
@wayneg3305 Glad it helped. Thanks for watching. Please like,share,subscribe if you haven't already. Be safe.
Mil gracias! me sirvió mucho tu vídeo, mi hijo lo desarmo y ya no lo pude armar de nuevo ya lo había dado por perdida 😢😢😢yo sé que no es de los más caros,pero lo compre con mucho sacrificio.pero gracias adiós que existe gente como tú qué comparten sus conocimientos y gracias a tu vídeo muy explicito lo pude volver a ensamblar ,😃😃😃 gracias dios te bendiga
Israel Fco Guemes Vazquez, my pleasure and thanks for watching. I'm so glad the video helped. Happy Safe and Prosperous New Year!
@@handyharvey gracias! igualmente feliz inicio de año y mucha salud, bendiciones y mucho éxito feliz año 🎆🎉🥳🥳🎇
Great video! Being the fool that I'm I totally forgot to take pictures while disassembling (had to change the motor) and those two plates in the chuck section really left me scratching my head. The good thing about the gears is that they are slightly different in size and cannot be put in wrong places easily.
Glad the video helped. Thanks for watching. Be safe my friend.
Can you sent me please a link to buy the motor?
Hi @stam230400, Im so sorry but I don't have any. Please try searching on google instead. Thanks and be safe my friend.
You Sir, has saved my life. Thank you!
Glad to hear it! Please Like the video and subscribe if you haven't done yet. Thanks for watching. Stay safe.
Thanks, very helpful 😁👍, mine suddenly broke. After watching ur video and disassembly, it works again.. but sound a bit rough but its fine...
My pleasure! Thanks for watching. Please like, share, and subscribe if you haven't yet. Cheers!!!
I have a b&d epc 12 which is drivin me crazy. After opening for a motor problem now mandrel turns free, no torque at all and you can stop with hand with motor at full speed. It’s assembled ok but i noticed that the external big tunnel gearing is free to move. So the problem i think is on the ball bearings... they are in place but very inside the holes... I don’t understand the principe of this gearing system... 😢
Just follow the witness marks left behind by the factory. They're there to help the machine figure out what goes where. You'll see lines, dots, divots and cutaways all over the parts that line up with their accompanying parts.
Hi @Classy Days. Appreciate it. Thanks for watching. Please like and subscribe. Stay safe.
Thank you good man, you have just saved me a few hours of swearing.
@Pamparam...My pleasure, glad it helped. Pls. like, subscribe and hit the bell for more videos. Thanks for watching my friend.
Es agua en lo que echas las piezas?
Muchas gracias
@kokenemesis, de nada!Por favor, dale like, comparte y suscríbete si aún no lo has hecho. Gracias!
So you were able to get spare cogs only from another drill? As I'm wondering where to buy them and failing miserably :/
Do you know if the Chuck can be replaced?
Hi @ozisag, I'm not too sure. Thanks for supporting my channel, please like, subscribe, and share if you haven't already. Be safe my friend!
Yeah mine popped open, catching me out. I got it assembled and everything works... but I have 3 left over parts that I could not place nor find any reference to. I don't understand why my repair worked and it still is. I have clearly made a mistake, Iended up with spares.
Hello.
Do you have a link where to buy a motor like this.
I can find exactly the same .
Motor "says" ls555ps.
@stam230400, I'm so sorry but I don't have. Have you tried searching on Amazon? Anyway, thanks for watching, please like and subscribe if you haven't already. Happy hunting.
Does your hammer mode work after assembling? Because mine doesn't
It does work, but sometimes not in 'full force'... I guess I need to tweak it a bit. Thanks for watching. Be safe my friend.
How much the motor of this unit. Sir.
sir, what is the replacement motor dc for ít, thank you
Hi @Imam Al Gazali . I'm not sure. I haven't got to it yet. Thanks for watching. If you're new to this channel. Please consider to like, subscribe, and hit the bell icon for more videos. Stay safe my friend.
@@handyharvey search "bosh motor 18v 13 teeth 9.5mm diameter'' online
My black decker was wobbly can i fix it without buying parts?
Hi kazue, I'm not really sure, it will depend on what causes the drill to wobble. Thanks for watching. Please Like, Subscribe and click the bell icon for more videos.
Thanks.
@porfiriomanuelsabinonorber3749. You're welcome. Hope this helps. Thanks for watching. Please like, share, and subscribe if you haven't yet. Cheers!
'kala ko sabay shot ;D
Sana nga kung pwede 😂...stay safe bro.
what kind of lubricant you used?
Hi @Michal Mróz. Just a regular red grease. Thanks for watching. Please subscribe. Stay safe.
Grasias
@cesrrosas1618, de nada. Glad it helped! Thanks for watching. Cheers!
Obrigadooooooo
Thanks, it's my pleasure!
Me ajudou no Brasil, grande abraço.
每個人以為容易拆下容易裝回去我說你別做夢
Lol...you bet! Thanks for watching. Please like, share, and subscribe if you haven't already. Be safe my friend!
This is not the right way to fix it!!! You will brake it when the drill will be forced. As you can see the very first set of gears has some dots on them which needs to be aligned ( like the car engine timing )
Hi @AWD to wildness that is noted, thanks for pointing that out. Thanks for watching. Please like and subscribe. Stay safe.
這個容易猜出來不容易裝回去的是用機器裝上去的笨頭笨腦的我們裝不回去的
So stingy with the grease
Hello everyone. Please subscribe to help me reach 1k subs, thanks.