The silver birch duramax that was in front of his truck when he first saw it looked really good too! You southerners are so lucky you have rust free trucks!
Damn! The Denali looks absolutely killer! Turned out soo much better than I expected! And those 22s are on point! Loving it! Next I think he should do exhaust on the truck for sure! And then amp research steps!
Your truck is beautiful man! My 2016 LTZ Silverado was lifted at the dealership. Fabtech 6 inch lift and 22"black GM wheels I'm running 35 inch tires and no rubbing. The offset of your rims is the reason they rub.
Beautiful truck !! I have almost same truck except mine is Summit White 2017 GMC Sierra Elevation with 6.5 Zone lift and Moto Metal 22x10 wheels with 35x12.5x22 Nitto Terra Ridge Grapplers. My wheel offset is -18 and I rub a little in reverse at full lock but I can make a complete U turn at full lock without rubbing. Not sure you should be rubbing as bad as the guy said it would.
Did this kit come with the upgraded upper control arms? i Wanna get this 6 inch BDS but im not sure whether or not to spend the extra 700 and get them. Thanks
did you have to trimmed the fenders or did you left it at it was? does it rub a lot turning forward or backing up?? where the struts replaced or did you kept the magnaride system?
love the truck!!! looks so good! :) keep up the good work & the next thing is to put those halo rock lights underneath the truck i had those on my jeep & i loved them!.
1986mrcrj depending on the size of the tire and offset its gonna rub some regardless of how much you spend if it’s a 6in lift you can only trim so much
JW Montoya so do you know if he had to re-zero or recalibrate his magneride at the dealership before it rode like stock again? I ask this because i recently lifted my denali and the struts and shocks feel locked up which is why i was wondering if he had the same issue.
@@Builttolastdenali wait bro I just lifted my denali and the ride is super bumpy. Is the magneride calibration a thing they actually do at the dealer. How much they charge for that? I think mine has this problem. Also what psi you run your tires. I'm gonna try to change that first. I'm running 60psi on ride grapplers. That could also be the problem. Going to 40psi to see if it changes the ride a bit.
Bad ass truck. What's the measurement from the ground to the front fender ?? Is it like 46"?? For that truck. And also whats the measurement on your denali?
This turned out sick. Do you think peter will regear his truck? I had a 2012 sierra on 35's and the 3.42 are so bad on the highway, upshift downshift like crazy on the highway.
i just ordered all my stuff thru a company and its fuel forged 24x 12 with 13.5x35 with 4.5-6" bds and he says im not gunna rub, i aint liking my chances
What did you do exactly? Can you tell me the name of the company and if you could tell me everything you changed because I want to do the same thing. Even wheels and tires
JW Montoya On a luxury truck like this, Denali is obviously top of the line vehicle. In saying that, did all these changes effect the smooth comfortability ride a luxury vehicle should have? Smooth ride, no bumpy ride, turns well, hurt acceleration in anyway etc...
Brendan Nieto I have the same truck but with 20x10 -12 wheels, 33x12.5 Nitto Terra Grappler G2, and 4" Fabtech lift. After doing it I saw a 1-1.5 mpg difference. I also have Borla Sport and Volant CAI.
what should we do next to the Denali?
JW Montoya exhaust
Tonneau cover
JW Montoya put the stock wheels back on.
LED underglow
JW Montoya needs hubcentric spacers in the rear.
That's the most country asian scent I ever heard
Don't matter who owns the truck it's sick I like it looks bad ass!!!
The silver birch duramax that was in front of his truck when he first saw it looked really good too! You southerners are so lucky you have rust free trucks!
Damn! The Denali looks absolutely killer! Turned out soo much better than I expected! And those 22s are on point! Loving it! Next I think he should do exhaust on the truck for sure! And then amp research steps!
That truck is insane, that’s my dream truck.
Love those wheels and look! I will be getting a Denali 2500 HD and that’s the set up I want..... good job!
Think y’all might be the 1st Asians with a clean gmc truck 🙌🏼🙌🏼 congrats 🎉
Dat truck is bad ass looks clean af
Legit buying this truck! And definitely getting this set up! Looks beautiful
Your truck is beautiful man!
My 2016 LTZ Silverado was lifted at the dealership. Fabtech 6 inch lift and 22"black GM wheels I'm running 35 inch tires and no rubbing. The offset of your rims is the reason they rub.
everyone hating on the wheels? i love them 😍
I love these wheels.... I think they’re the best looking ones in the market right now.
Southern Asian... interesting
sick
That’s what I thought!
Buying my 2018 gmc 1500 next week!!! Can't wait to lift it!!! Love the content guys!
brandon robinson appreciate it! Good luck!
I have the same truck just a year newer and that what i am wanting to do..... nice job guys!
Proper.
This looks fantastic.
Same kit I want for my LTZ Suburban.
If you have to worry about rubbing, what's the point?
tough to run 22x12 wheels with 35" tires on a 6" lift without some rubbing.
I’ve had couple trucks lifted there. They do great work. Truck looks badass brother
Beautiful truck !! I have almost same truck except mine is Summit White 2017 GMC Sierra Elevation with 6.5 Zone lift and Moto Metal 22x10 wheels with 35x12.5x22 Nitto Terra Ridge Grapplers. My wheel offset is -18 and I rub a little in reverse at full lock but I can make a complete U turn at full lock without rubbing. Not sure you should be rubbing as bad as the guy said it would.
Love the truck, looks amazing
Extremely sick looking Denali bud
Very nice !! GMC is the way to go. Nice job.
how did you get the rear leveled to match the front did they put a 4 or 5 inch block for rear?
Sick af, i want my denali to look like that.
Did this kit come with the upgraded upper control arms? i Wanna get this 6 inch BDS but im not sure whether or not to spend the extra 700 and get them. Thanks
It did not!
did you have to trimmed the fenders or did you left it at it was? does it rub a lot turning forward or backing up?? where the struts replaced or did you kept the magnaride system?
What was your mpg with this setup?
love the truck!!! looks so good! :) keep up the good work & the next thing is to put those halo rock lights underneath the truck i had those on my jeep & i loved them!.
What tint is on the front and back?
What’s the total height? Will it fit inside garage with a little under 7’ door?
It's not suppose to be doing any rubbing when you turn. Especially you spent money for that work.
1986mrcrj depending on the size of the tire and offset its gonna rub some regardless of how much you spend if it’s a 6in lift you can only trim so much
he would have to go with a higher lift to not rub at all with 22x12 wheels and 35" tires.
Craigzy1 you right needed a 20x10 wheel. My tires don’t rub
Do this truck have the Magna ride??? Was there any changes made to it???
it does. BDS kit keeps the stock shocks
what was the loud pop right before he drove off?
I think it was the tailgate locking when he put it in drive
Looks awesome.. I have a denali but 2016 I put on a rough country 7 inch but ride is rough af.. how the ride on that lift kit
Sergio Castillo they don’t call it rough country for nothing
what is the new height on that truck with the lift and 35's? would it fit in a standard garage with 84" of height?
That truck is savage!!
What kinda of gas mileage does it get with 35s on it
Exhaust is a must 🙏🏽
Will Any of the cognito mods fit on there like upper control arms etc???
I'm not sure if cognito make kits for 1500s
JW Montoya, did he have to re-zero his magneride? How does it ride?
It rides just as well as stock IMO
JW Montoya so do you know if he had to re-zero or recalibrate his magneride at the dealership before it rode like stock again? I ask this because i recently lifted my denali and the struts and shocks feel locked up which is why i was wondering if he had the same issue.
@@Builttolastdenali wait bro I just lifted my denali and the ride is super bumpy. Is the magneride calibration a thing they actually do at the dealer. How much they charge for that? I think mine has this problem. Also what psi you run your tires. I'm gonna try to change that first. I'm running 60psi on ride grapplers. That could also be the problem. Going to 40psi to see if it changes the ride a bit.
Can't wait to get my Denali
Did you get it yet ?
What are the tires size
Bad ass truck. What's the measurement from the ground to the front fender ?? Is it like 46"?? For that truck. And also whats the measurement on your denali?
What's the offset on those rims thats what i'm looking to get for my rig and i love how that denali looks!!!
What's the music at 5:54
The voices.. the faces..
Oil and water. My mind hurts.
How tall is it to the top of the xm antenna? I'm worried about clearance in garages
no clue. I'll measure it next time I see it
JW Montoya what was the measurement?
How much doe the work cost?
How high he lift it?
Beautiful Truck My Dream Truck congrats Bro
All it needs now is a nice exhaust
that's what I told him
what off set is the rim? -44?
Yup
Just playing around. Nice lifts
What is the gas mileage after the lift?
Did lifting the truck avoid the factory warranty?
nope! been serviced and everything after
What offsets are on the wheels... I like your set up for mine.
-44
This turned out sick. Do you think peter will regear his truck? I had a 2012 sierra on 35's and the 3.42 are so bad on the highway, upshift downshift like crazy on the highway.
I doubt he's gonna regear the truck anytime soon
Im so jealous!!! It looks sick!!
Is there any rubbing?
KREEMTHEDREAM yeah there is
What rear gears is he running for the 35s
Stock
@@JWMontoya 3.42 or 3.73?
Is that bumper stock. Those fog lights are nice
stock bumper
i just ordered all my stuff thru a company and its fuel forged 24x 12 with 13.5x35 with 4.5-6" bds and he says im not gunna rub, i aint liking my chances
Can u measure from roof to the ground for me?
Looks amazing!!! 💪🏽💪🏽
I could probably get a duramax for college should I?
sure, why not?
Krypticate what do you need a duramax for?
What kind of rims are those?
Austin Metcalf fuel assault
Does it affect your warranty?
i couldn't wait to see this video. looks nice bro. now u should delete for performance, add an exhaust, and hd tow mirrors
What did you do exactly? Can you tell me the name of the company and if you could tell me everything you changed because I want to do the same thing. Even wheels and tires
the title lists everything...
So much for the magnetic ride suspension. Why not do this package on
A all terrain
tufkid91 it keeps the stock magneride
What offset?
Was I the only one a tad shocked when he video started?..... haha
haha why?
Yea why buddy?
looks so good!!!
Have you sold the factory 22”?
yeah
Beast of a truck
What's the labor rate at Dealer Options?
cheaper than Trucks and Moore
JW Montoya lol. Just wondering cause I've heard they are high. Thinking about gettin a lift for my F150
I highly recommend them
What is the setup?
It's in the title
I think it looks great
What is the offset on the wheels?
Team Moto -44
Oh alright. Thanks! By the way, the truck looks great!
Were you able to keep the magnaride with the lift kit?
yup
Awesome truck man
Awesome truck. Would you be able to tell me how much did this cost? Getting a 2018 gmc truck and wanted to do something similar.
About 6k with lift, wheels, tires, and labor
JW Montoya you the man bro! Going to have to wait one tax return year and my piggy bank for it lol.
Beto L definitely not cheap!
JW Montoya yeah, on a truck like that it shouldn’t be cheap. Truck looks dope!
JW Montoya On a luxury truck like this, Denali is obviously top of the line vehicle. In saying that, did all these changes effect the smooth comfortability ride a luxury vehicle should have? Smooth ride, no bumpy ride, turns well, hurt acceleration in anyway etc...
Is it 2wd?
Lenny Wilson 4wd
Does it effect the gas mileage
yeah
What did the mileage drop to? I have the same truck and am considering a similar setup but am worried about how much hit ill take...
Brendan Nieto I have the same truck but with 20x10 -12 wheels, 33x12.5 Nitto Terra Grappler G2, and 4" Fabtech lift. After doing it I saw a 1-1.5 mpg difference. I also have Borla Sport and Volant CAI.
😍That’s what I want for my truck how much does something like that cost with the lift plus tires???
Jules Cirilo about 5 grand
JW Montoya nice I better start saving
Rock lights and 2017 hd tow mirrors should be next
does dealer options sell wheels and tires or just lifts?
they sell wheels and tires too. They do everything
Beautiful truck
5.3 or 6.2 liter?
KREEMTHEDREAM 6.2
JW Montoya did he regear?
How much were the wheels
about 1400 I think
-44 offset?
Garrett Miller yup
What the offset? Can you make a
U- turn????
-44 and yeah
I just put a 4 inch on my Denali, wheels and tires are next.
What's state??? LA
Georgia
Wow really that's crazy and I was just repeating wht u said man but your truck nice too
keiwanne Tyler what do you mean?
That truck looks great but doesn't suit him very well lol
Blaker1122 22 whoever sees him in that truck is gonna thinks he's gonna do a wrap job for a customer 😂
agreeeeee 100%
Blaker1122 22 why doesn’t it suit him?
I was saying the same thing ! He looks like he should drive a fuckin lil ass smart car. That's a badass truck tho ! I'm diggin it 👍👍👍
Freddie Lopez lmao
Dope ass ride, would trade all my jays for that bad boy😉😂
SIERRA GANG WYA
I would ditch those wheels and mount the tires on those nice factor Denali rims! Rubbing problem solved and The truck would look amazing!
It’s lifted but still compacted