Planar Mill Operation | NX Manufacturing | NX CAM

This video explains about how to use "Planar Mill" Operation in NX Manufacturing module.
Definition : Removes material in planar cut levels normal to a fixed tool axis.
Define part boundaries parallel to the floor. Part boundaries determine critical cut levels. Select blank boundaries, Select the floor to define the bottom cut level.
Recommended for general use in roughing out large volumes of material on prismatic parts with vertical walls.
Link for 3D model: bit.ly/3cwAttx
#NX #Manufacturing #CNCProgrammingClub #NXCAM #PLANARMILL

[@giwtilis1294]

congratulation from ATHENS GREECE i hope you make more video tutorial about NX.
thanks a lot

[@vivek_pateI]

Thank you, I will

[@tazeemtaj7760]

awsome..thank you

[@vivek_pateI]

You are welcome!

[@rohitninama9007]

Thank you

[@vivek_pateI]

You're welcome

[@elangovank8447]

I understand planner mill tool path Generation but In open pocket entry position should be outside to inside
If closed pockets should be ramp plunging with low feedrate
Can u explain?

[@vivek_pateI]

Thanks for sharing concern here. We should enter tool from outside to inside in case of open pocket. This is just for understanding the command only. Actually, I wanted to add that part in video but it was increasing length of videos and hence skipped it.

[@Kanha0703]

👍👍

[@vivek_pateI]

👍

[@sachinhole4196]

Very nice

[@vivek_pateI]

Thanks

[@somanathpradhan256]

Excellent super

[@vivek_pateI]

Thank you so much

[@prakashkrishnan7363]

Tq

[@vivek_pateI]

Glad you liked it!

[@prabuk5208]

Sir.....why we want use multiple operation......if cavity mill and then use z level profile can finish all depth at a same time then why we use planner mill...explain me sir......plz

[@vivek_pateI]

In this video we are trying to explain planner mill operation only.
However, you are right about cavity mill operation. We can use cavity mill operation with selecting "depth first" in cut order. It performs the same way.

[@igorsv7889]

Good lesson. But where can I find a book on NX-CAM systems)?

[@vivek_pateI]

Book is Not available.

[@ompathak1694]

Sir please upload video on post processor builder how we can build post processor

[@vivek_pateI]

Sure.

[@aftabahmad7492]

Sir how to know how many material are left...nd which size of cutter are used

[@vivek_pateI]

To check the thickness of the material which is left after machining you can go to "Verify tool path" or "Simulate machine" then click on "Show thickness by Colour".
You will be displayed the leftover material and it's thickness by coloured plot.

[@sachinhole4196]

Make in Nx Cam video and different operation

[@vivek_pateI]

We are working on it.

[@nesantips5318]

CNC TURNING available sir

[@giriharur4386]

Sir pls give some standard post builder file formats for all controllers. Because I can't edit post builder

[@vivek_pateI]

Sure!!

[@nesantips5318]

Bro

[@aftabahmad7492]

Sir plz explain about geometry subtype MCs, workpiece,mill area,mill geom..how to know which option for which operation...?

[@vivek_pateI]

Okay sure