REES52 3D Pen 2nd Generation full Introduction STEP BY STEP make a sketch

In this video, we are giving a basic tutorial on REES52 3D printing pen 2nd Generation and how to use it.
PURCHASE LINK :- rees52.com/hom...
KIT INCLUDED: REES52 2nd generation 3D pen kit ( 3D pen+ 3 colour Filament PLA + adapter + Holder + User Manual)
COUPON CODE : FLAT5 ( Use this code to get 5% discount)
YOU CAN PURCHASE THIS WHOLE KIT FROM THIS LINK
FURTHER EXPLANATION IS ALSO AVAILABLE ON THIS LINK

[@naziarizwan8176]

Endless possibilities of your creativity . Yes 😁

[@tform4967]

guys you just need some practice it works for me after 6 weeks of practice

[@elisgamingchannel2996]

That's basically a month

[@-MastersTV-]

For some they only need 2 days

[@rahulnarang9428]

Good Job

[@fionajames8098]

Out of the the videos I’ve watched you were the most helpful clear good instructions thank you 🙏

[@digitalgo-cool4619]

Thank you very much other RUclipsr just show the speed controller but u explained it very well thanks again

[@chaitanyamangla2364]

Nice👍👍

[@rees5286]

Thank you !!

[@manmohankumar5939]

Nice

[@rees5286]

Thank you !!

[@Comrademad-100]

Thankyou for giving us information about 3d pen
I just ordered it I hope your video help me
For using 3d pen

[@himanshujhamtani1711]

Awesome product from an awesome company👌✌

[@rees5286]

Thank you !!

[@rees5286]

Thank You!

[@nasirahmad8937]

I like it.. 👍

[@rees5286]

Thank you !!

[@uniquetechchip8985]

👌👌👌

[@rees5286]

Thank You!

[@roritumi7412]

Super cool and good job man;)

[@Lava-uh4hi]

Cool

[@prabhsharansingh8277]

👌🏻

[@rees5286]

Thank you !!

[@krishnavenii1008]

Robocraze 3D Pen-2 Professional | 3D Printing Drawing Pen with 3 x 1.75mm ABS/PLA Filament for Creative Modelling and Education (Pack of 1)

[@dinkersaini7214]

Amazing tool

[@rees5286]

Thank you !!

[@simhoonhoon4613]

Thanks for teaching

[@jameelaav6197]

Thanks my pen will get soon so iam learning to use it 😅😅😄

[@ricezara]

I got this pen yesterday and I don’t think it’s working as well as it should be. For example I press the forward button and it starts coming out but as soon as a little bit comes out it makes a loud squeaking sound and then the filament stops going through. I only got it yesterday I don’t understand what is going on please help!

[@Zafinaaaa_official]

Mine had that sound too
After I off and on back it worked

[@abbythedrawer4993]

Unplug and wait for it to trun green or blue and the temp is 200 pla the down button keep your finger on it

[@user-od4gr9ld7b]

Ten návod na 3d pero ber jako malou omalovánku🤗💜

[@macaxbreapage8459]

Hey there I just got one and ever time I press forward button to set temperature it turn it’s self off did I get a lemon or am I doing something wrong please help 😭

[@roritumi7412]

Just practice🫤

[@thivyanramesh3106]

I like 3d pen

[@roritumi7412]

And I burn my hand 😨🤚🔥🔥🔥🔥

[@ranvindersarwara3141]

😊

[@loser6972]

I got the pen! Though not to sure how to make 3d objects, any tips?

[@rees5286]

You can check out some sketches from google and make them. We also did the same.

[@SeriouslyStars]

Thanks it helped a lot

[@phxsuns9535]

Thanks

[@daisy0_0crazy61]

Guys do u have any tips for me my 3d pen heats up very slow like it will never get to the filament it doesn’t turn green and even after minutes and minutes it doesn’t do it

[@Xkamas1]

You can change the heat by buttons

[@sahasra4338]

I saw your face on the mirror of the table 😅

[@roritumi7412]

😮how???

[@mdbablu2338]

নিতেচাই

[@haileybleaney6674]

I have the dame color and same brand haha but mine takes forever to heat up

[@gottasweep250]

It takes so long to become green I’m still waiting

[@roritumi7412]

I buy thempen an i try is hard i had plastic but is hard too draw

[@gaiafresco7441]

quindi per disegnare deve stare attaccata alla presa?

[@divyasaini7304]

Yes

[@rosiet3559]

My filament comes in for like 1 inch and in half then it starts to go in and then go out over and over

[@Mono_Autophobic]

It's may be the melting point low or other malfunction idk, but is it a good product ?

[@rees5286]

@@Mono_Autophobic you can try it. It is good .

[@rees5286]

@Hong Truong Definitely, There is a problem with motor inside the 3d pen. Be careful, never push or pull the filament on low temperature, due to this sometimes filament gets stuck in the pen which will cause this problem.

[@Mono_Autophobic]

@@rees5286 any other function?

[@rees5286]

@@Mono_Autophobic you can visit our website we have a lot of pens. You can check their specifications. Website : www.rees52.com

[@GraaceGirdhar]

On which thing are you making

[@deepakmane6879]

3D pens

[@bjmanohar2000]

Do we need to charge while use???

[@baishalidas8888]

What Money To buy this

[@crystallay8725]

ဘယ္​​ေလာက္​လဲ

[@tactialmuffin1522]

Weird mine don’t work like that

[@roritumi7412]

Buy a new one😅

[@shibani1980]

Mine isn’t even turning green

[@cagtusonsuz8564]

How much? You can?

[@claradupianchan8809]

Can i order 3dpen

[@sushantkushwaha1805]

[8/14, 12:25 PM] Sushant: I want refund
[8/14, 12:25 PM] Sushant: For order id LQLRNHZHI

[@sahasra4338]

You have sight right 😂😂😂

[@roritumi7412]

Nah I don't 😏

[@anushkatankankhar351]

3 d Pen se bani hui chij tutati hai ya nahin

[@roritumi7412]

Tidak bisa

[@VISCAGANDESA]

A shit product indeed. Doesnt adjust temperature at all.

[@shibani1980]

Your instructions did not help