Marantz SR-6010 7.2 AV Receiver Red Light Blinking or Auto Standby Fault Fixed in Tamil
HTML-код
- Опубликовано: 29 янв 2025
- I'll Show You How to Fix Most Common Fault Occur Over the Most of the Marantz SR-6010 7.2 AV Receiver Red Light Blinking or Auto Standby Fault Fixed in Tamil #denon #marantz #avreceiver #fix #amplifier #yamaha #pioneer
IF Any one Need Service for Your AMP, AVR please comment me, i'll fix it and
give my Full Support
Shop Address:
FIX AVReceiver,
Shree Sai Service Center,
M. Balaji
103, Poongavanathaman Koil Street,
Vasanthapuram,
Opposite to DMK Office
Vellore-632001
Whatsapp No: 9943124215.
******Please Whatsapp Me ******
******Only Call Me In case of Emergency********
Becoz in work I am not answering calls properly.
Please support and Subscribe and let me know the pros and cons about my work via comment section
Any Suggestion please Let me Know i'll ready to improve it.
So intricate ic position and yet your patience in identifying the correct trouble shoot area.
A good education to the aspiring tech generation.
Hats off.May God bless you.🎉🎉
Thanks sir
Really very good information sir
Transparent work
Good luck for u r future.
No body will do as detailed video thanks bro 👍👍
Very good informative video and your experience hearts off you sir👍👍
Great video, super informative - your skill transcends language. I do not speak Tamil but was still able to follow along perfectly! Currently troubleshooting the same receiver, can you please post the replacement resistors you used on this repair? Thanks!
Your work and knowledge is really awesome sir..👏👏👏
Thanks a ton
Sir job is super looking forward to see next video ❤❤❤❤❤❤❤❤❤❤
Very soon
@@fixavreceiver thanks
Hello thanks for you're video. Can you record very slow please and with traduction cc please. Thanks for all
Great job 😍😍😍
Fault finding genius
Thanks
Great job you're experience person 👏
Thank you! 😃
Thanks for the detailed video brother❤❤❤
My pleasure
You work neatness bro
Great work ❤
Thanks ✌️
Good job bro
Great works sir 💯
Thanks ✌️
Good work sir 👍
Thanks 👍
Good work👍👍
Thanks ✌️
Super super great video .
Thank you very much
Super sir...
Bro ennaku fuil setup speaker and amplifier venum bro naila base oda irukanum einga ready paine tharan mudeuma
Sorry bro . Strictly No sales only service.
Super 👍
Great in work ,poor in availability for calls 😔
Yes, I admit it. While working ibam not answering calls properly unless it's important
Yes, I admit it. While working ibam not answering calls properly unless it's important
@@fixavreceiver hopefully we are not expecting from you sir thanks
may i know what you r expecting from me. do u want me to attend all calls and speak and explaining all doubt in my work time.also spoil my mind set by unwanted call(sales related) that is not related for service.
then which time i work for me and my customer please advise me.
that is reason i mentioned clearly in all video description exactly like below.
IF Any one Need Service for Your AMP, AVR please comment me, i'll fix it and
give my Full Support
Shop Address:
FIX AVReceiver,
Shree Sai Service Center,
M. Balaji
103, Poongavanathaman Koil Street,
Vasanthapuram,
Opposite to DMK Office
Vellore-632001
Whatsapp No: 9943124215.
*******Please Whatsapp Me *******
*******Only Call Me In case of Emergency*********
Becoz in work I am not answering calls properly.
Please check by your self. and please advise me to what to do.
Super
Thanks
Give us what kind of tools you using
Bro gloves use panalamala for your safety
Good working
Thanks
Unga shop yenga erukku
Vellore
Nice
Anna 2sc5200 and 1943 original eappadi kandu pidippathu
Will upload on upcoming videos
Ok thanks bro
I have same receiver Anna ❤
👍😊
How can I contact you to brother?
Full in description bro
Je ce genre de panne sur mon ampli, je ne sais pas comment m'y prendre pour diagnostiquer
Check step by step . Sure u can do it
@@fixavreceiver j'ai tout démonté, je ne suis pas spécialiste en électronique ,mais j'ai vérifié les composants que j'ai pu, je n'ai rien trouvé...
@@fixavreceiver j'ai retiré la carte que vous réparez dans votre vidéo, l'amplificateur se met toujours en sécurité, j'en déduit que cette carte n'est pas en cause ?
ok
for this kind of unit u have to check from one by one
1.check the secondary voltage is present as per the spec.
like 5v -5v 12 -12 etc.
2. then check the amplifier dc and ac detect pins without removing the amp unit.
in my case i got a burned components and i am pretty sure about the fault symptoms.
3.check the all necessary voltage are present in HDMI board.
4.check any ic is dead short and voltage loop back so amp preventing the damage by going into standby.
5.check the dc line in amplifier section for voltage low and high.
6.check the standby board for relay driver functionality.
7.check the cpu ic protection pins for protection cause.
8.download the service manual and check every thing present in cpu ic.
9.do not remove anything until you find the culprit component,
10.do not check continually take some days gap then check again so that u got new idea's for fault finding.
i have yamaha htr 3067 my receiver front left & right noise problem
It's fixable ping me on whatsapp
I dont know the language but i can see that this talk to me.
👍👍
Lucky Customer Sr6010
❤❤❤🎉
Please load subtitles
Sure
1.How many hours per day can AVR be used continuously?
2. AVR Can you use UPS?
Pls reply
I use it for testing at least a minimum of 4-5 hours or two movies . And I don't test with the ups and stabilizers , I check and work with normal house and shop AC lines. . For testing it's better because all customers don't have the ups and stabilizers.
But using it via stabilizers will give you a long life and better performance.
Thank you
Just think how many more people this would reach if there was an English translation
Yes I know it. Soon I will upload English subtitles
@@fixavreceiverI hope so. I believe there might be be sufficient information in your narration for me to diagnose and repair the 0.5s flashing LED protection mode fault in my SR6010
❤
Bro, all okay, but I don't agree that you completely ignore the original thermal paste and didn't reapply fresh thermal paste.
Used thermal paste will be hardened and no longer able to prevent air void between the remating transistor and the mica insulation surfaces.
This will increase the thermal resistance and cause the transistors to run at higher temperature, then will cause thermal runway and failures.
Once the mating surfaces are separated, it is compulsory to clean up old thermal paste and reapply new fresh thermal paste to ensure no air void.
Hi, I applied for it please check the video once again. Time is 23:37 in the video segment
I also mentioned the thermal paste I applied and showed on the screen.
Time is 23:37 in the video please check
Great bro. Thanks.
👍
My sr6009 don't have picture and sound all th functions are ok
Ok then it needs to check and service
@@fixavreceiver i am in South Africa
🎉🎉🎉🎉🎉❤❤❤😊😊😊🤝
❤❤❤🎉