Unboxing from DianSheng - Galaxy 8M, Galaxy 9M, Galaxy 10M, MsCUBE 3x3
HTML-код
- Опубликовано: 13 окт 2022
- Thank you again to DianSheng for sending me the products!
Sponsored by DianSheng and SpeedCubeShop
You can use the code "janos" to get 5% off any of your orders from SpeedCubeShop
Links to the cubes:
Galaxy 8M: speedcubeshop.com/products/di...
Galaxy 9M: speedcubeshop.com/products/di...
Galaxy 10M: speedcubeshop.com/products/di...
SpeedCubeShop:
Website: speedcubeshop.com/
Instagram: / speedcubeshopofficial
RUclips: / speedcubeshopofficial
DianSheng:
Facebook: / dianshengcube
Instagram: / dianshengcubeofficial
My WCA: www.worldcubeassociation.org/...
My Instagram: / janos_bereczki02
eu imi voi cumpara un 9x9 magnetic (ca asta)
Which lube do you use for big cubes?
Usually I put a few drops of Martian, but depending on what result I’m looking for, I might use Galaxy (it makes the cube a bit more controllable), or a combination of Stardust+Lunar (this is the fastest combination from what I’ve experienced)
@@janosbereczki7040 And do you also clean the cube sometimes before putting again lube in it? I mean, it's pretty frustrating to assemble a 6x6/7x7. But without cleaning a turning will be only worse not?
I used to clean it before lubing, but nowadays I would just lube it without cleaning it before. It takes too much time to clean it well and the results are not much different (with/without cleaning). I would only recommend cleaning it if the cube is either set up in a really bad way (it is full of lube and it is almost impossible to break it in), or you want to relube it in a different way, by using a different combination of lubes (this way you can get the best possible result from the new setup)
Sorry for the late reply. Usually I wouldn’t bother cleaning it, unless the previous setup is really bad. From my experiences, the turning doesn’t get much worse, maybe after more than a year or so, but before that you shouldn’t have problems with it
faci un video uni vorbesti rom