Good video. I suggest adding a filter and demonstrating the methodology on the discharge to drop THD under 5%. I also suggest making the equivalence circuit model of a motor in a block, and make that the load. I think you would get a lot of views.
Thanks for video very helpfull to understand inverters. Could you please, create new video with real components. mean that actual diode, mosfets, IGBT etc.
@@士凱-g1y If the MOSFET Is High side, you have to provide 5V to the VGS, which Is literally Vg-Vs, a differential voltage. So, you First decide your pulse, then with the gain E you connect both the gate and the source and not the source to gnd, or else the MOSFET won't turn on
@@manoA98A Sorry for the trouble again. I would like to ask how to adjust the square wave generated by the low-pass filter to align with the sine wave. I have adjusted the delay, inductance, and capacitance, but it seems that there is not much change. Once again, thank you. 🙏
![[LTSPICE] 3kW LLC Resonator Soft Switching](http://i.ytimg.com/vi/plh6mb6SnPg/mqdefault.jpg)
![[LTSPICE] 3kW LLC Resonator Soft Switching](/img/tr.png)
Good video. I suggest adding a filter and demonstrating the methodology on the discharge to drop THD under 5%. I also suggest making the equivalence circuit model of a motor in a block, and make that the load. I think you would get a lot of views.
would you make a video on 3 phase inverter with one of th soft switching technique like the ARCP
Sir , can I have the simulation file..
Thanks for video very helpfull to understand inverters. Could you please, create new video with real components. mean that actual diode, mosfets, IGBT etc.
Yes
sorry sir, why if i change the switch to MOSFET or IGBT? can i try like you do? please teach me, thank you sir
Excellent 👍... could you please make video on 3 phase PFC and input filters using LTspice??
Ok I Will try ✋
Excuse me, if I want to use NMOS instead of SW to make a single-phase, how should I do it? Is there any tutorial QAQ?
Just substitute the switch with Nmos, select One of the list and then provide enough gate voltage like 5V
@@manoA98A Should the Gate terminal of NMOS be connected to E and then to BV, or is it sufficient to connect it to DC?
@@士凱-g1y If the MOSFET Is High side, you have to provide 5V to the VGS, which Is literally Vg-Vs, a differential voltage. So, you First decide your pulse, then with the gain E you connect both the gate and the source and not the source to gnd, or else the MOSFET won't turn on
@@manoA98A Thank you for your video and your advice
@@manoA98A Sorry for the trouble again. I would like to ask how to adjust the square wave generated by the low-pass filter to align with the sine wave. I have adjusted the delay, inductance, and capacitance, but it seems that there is not much change. Once again, thank you. 🙏
Hello, how can I contact you for a project please
What kind of project?
@@manoA98A design an open loop SPWM
b2:
-- Syntax Error --
if(v(controla)>=v(tri),1,0
Copy this
V=if(V(ControlA)>=V(tri),1,0)
@@manoA98A Thank u, have a good day