They need to follow the lead of Pof and ruger with the revolution/rogue and SFAR, and make a short frame ar308 lower, it will save tooling for uppers when you can just use an ar15 upper receiver.
It's not easy to make a reliable, accurate and durable 308 gas gun. This (if successful) is merely adding a entry price option(if they didn't overshoot the pricing) to the 308 piston guns. Mind you Tavor7 is ~1700. SCAR 17 is still the lightest 308 that I trust my life to work from BR to SPR roles.
@@JohnZ556 If successful? You act like they haven't made dozens of guns successfully already... RIP SCAR. Overpriced hunk of metal, that you can't even put a can on without having issues... with the gun AND the company that made it.
Yeah I gotta say I wanted to like the SCAR17 but it was really cheaply made for what it is. You spend $3K and immediately have to pay $300 on a trigger that isn’t garbage… Then you have a flimsy stock and cheap plastic lower… It was way more accurate than it had any right to be though! But I ran a Surefire 762K on it with the correct mount just like SOCOM did and the screws for the recoil spring bracket kept walking out on me. I don’t see how the PSA rifle could be any worse tbh considering how many SCARs had stock latches and other small parts break in theatre during military use… But I’m really excited about PWS’s new modular rifle, it basically is what the ACR should have been with the bonus of being configurable in 5.56 to 7.62.
I expected not to use any lower because most ar10 and dpms lowers are vastly different company to company. We needed this to be the scar we can afford, a better cartridge than 556.
I know the PA10 lowers are DPMS LR308 pattern, but they are a bit unique, just enough that an Aero M5 upper doesnt mate up to it. So... This is really disapointing. The coolest build I had imagined would be an Aero M5 FDE lower receiver and a PSA FDE 308 Jakl upper, with a Haga Defense ACR stock. (F5 stock sucks)
I have an Aero M5 lower with PSA upper. It’s a little crazy that the Aero upper don’t fit in the PSA lower. 🤨 You just may be able to get your build after all. I’m sure they will clarify what is compatible once closer to coming out.
Ive heard from 10 unique personalities on both AR10 Reddit and also on the PSA forums that the PSA PA-10 receivers don't mate with the M5E1 receivers. Some issues with width causing gaps, geometry is a bit off, and the takedown tolerances are different as well. IF you got an M5 lower to mate to a Gen 3 PA10 Upper, I'd like to see a video of it working. Would benefit the community a lot to see its possible despite other reports.@@chriscollins644
I could have sworn I heard a PSA rep in another video say you can use a certain ar10 lower with the JAKL upper if you just wanted the upper instead of the entire rifle.
I was thinking that a dream setup would be to have this with a standard dpms lower and have a genesis 12 shotgun upper ready to swap. Sadly, this may not be the case. Sad
Will 100% get one
Will definitely buy one. Never going to waste $4k+ on a SCAR and optics just to have to spend more money to upgrade that trash trigger.
L
I want the 308 Jakl !!!!
I'm currently building a PA-10 Gen3 lower, to be ready for when the 13.7" uppers and the F5 stock kits start shipping. I can't wait!
I watched the video for the JAKL. I liked the video for the Mass Effect music.
I don't need it... I don't need it... I definitely don't need it
You need it.
The 5.56 one is cool and it would be sweet to own one someday, but this.... I NEED THIS...
looks pretty badass
slamming my credit card on the table rn
Where do I put my deposit!!! Lets go!!!
I thought they said it was a standard PA10 lower.
I have heard them state in other vids it will fit on a standard pa10 lower but will require an adapter for the buffer tube area.
It's like the 5.56 one. You can use a regular lower. But they might be seeking export
PSA said it is compatible with their PA10 DPMS style lowers. Therefore, It is not compatible with Armalite style lowers.
They need to follow the lead of Pof and ruger with the revolution/rogue and SFAR, and make a short frame ar308 lower, it will save tooling for uppers when you can just use an ar15 upper receiver.
@@PureCountryof91there’s 2 different major patterns of AR10 receivers I believe the PA10 follows the SR25 pattern receivers
RIP SCAR
It's not easy to make a reliable, accurate and durable 308 gas gun. This (if successful) is merely adding a entry price option(if they didn't overshoot the pricing) to the 308 piston guns. Mind you Tavor7 is ~1700.
SCAR 17 is still the lightest 308 that I trust my life to work from BR to SPR roles.
@@JohnZ556 If successful? You act like they haven't made dozens of guns successfully already... RIP SCAR. Overpriced hunk of metal, that you can't even put a can on without having issues... with the gun AND the company that made it.
Yeah I gotta say I wanted to like the SCAR17 but it was really cheaply made for what it is. You spend $3K and immediately have to pay $300 on a trigger that isn’t garbage… Then you have a flimsy stock and cheap plastic lower… It was way more accurate than it had any right to be though! But I ran a Surefire 762K on it with the correct mount just like SOCOM did and the screws for the recoil spring bracket kept walking out on me. I don’t see how the PSA rifle could be any worse tbh considering how many SCARs had stock latches and other small parts break in theatre during military use… But I’m really excited about PWS’s new modular rifle, it basically is what the ACR should have been with the bonus of being configurable in 5.56 to 7.62.
Take my money!
I expected not to use any lower because most ar10 and dpms lowers are vastly different company to company.
We needed this to be the scar we can afford, a better cartridge than 556.
I know the PA10 lowers are DPMS LR308 pattern, but they are a bit unique, just enough that an Aero M5 upper doesnt mate up to it.
So... This is really disapointing.
The coolest build I had imagined would be an Aero M5 FDE lower receiver and a PSA FDE 308 Jakl upper, with a Haga Defense ACR stock. (F5 stock sucks)
I have an Aero M5 lower with PSA upper. It’s a little crazy that the Aero upper don’t fit in the PSA lower. 🤨 You just may be able to get your build after all. I’m sure they will clarify what is compatible once closer to coming out.
Ive heard from 10 unique personalities on both AR10 Reddit and also on the PSA forums that the PSA PA-10 receivers don't mate with the M5E1 receivers. Some issues with width causing gaps, geometry is a bit off, and the takedown tolerances are different as well. IF you got an M5 lower to mate to a Gen 3 PA10 Upper, I'd like to see a video of it working. Would benefit the community a lot to see its possible despite other reports.@@chriscollins644
I have a pa10 lower with an aero m5 upper… it works. But i have had plentiful ftf so I’m guessing you’re right lol this jakl upper will replace it
6.5 creedmoor jakl, please
Psa said it should work on most dpms lowers
i have a SCAR and i still want one
Have they announced even a tentative release date for the 308 Jakl, I have not seen anything since their SHOT show
I do not know.
I could have sworn I heard a PSA rep in another video say you can use a certain ar10 lower with the JAKL upper if you just wanted the upper instead of the entire rifle.
I talked to a different rep I guess. It should take other lowers, which ones aren't confirmed as of now.
Mass effect music? Does that break tos?
Nope
I was thinking that a dream setup would be to have this with a standard dpms lower and have a genesis 12 shotgun upper ready to swap. Sadly, this may not be the case. Sad
Competition for the Robinson XCR-M huh?
At a much lower price.
@@gundeals .... No price as of yet but I bet it'll be around 22 or 2300
🔥🔥🔥🔥🔥
New PSA JAKL handguad
I see you've become a spectre
Would it kill you to make a ambidextrous selector switch 🤦🏾♂️
Noice!
🤣 scar killer 😂🤣😅
Scar killer???
I have a Scar Heavy and to say that shit is a Scar killer is very disrespectful.
I'm guessing $1800-$2000????
Mim thinking more like 1500
You are probably both in the ballpark. sub 2k for sure.
I think 2000 complete rifle and 1000 for upper
So the lower will be another 1k lol. Dude 556 complete jakl lowers are 300 bucks@@johncoleman5974
Thats an scar h