I don't know if you can help me but I'm having an issue with UpnP on my Blue Iris PC that it and all of my cameras are on. I can not get UpnP allow me to setup the web server on BI. I have used this software for years and it was never an issues until I installed a complete end to end Unifi network. Setting up Vlans were easy, but I would like to use my Phone to check in on my cameras and I can't to work even on my Lan. I love my UDM Pro except this issue I have checked the UpnP setting for that Vlan so I don't understand why it won't add the rule. Hope to hear back from you.
I have one Question? How im going to assign a different and tagged management vlan in the udm pro? The only way I found to do this was to assign a firewall rule from the tagged management vlan to the ip address of the controller. Then assign a block rule before the allow rule, blocking port 80,443 and 22. Then change each device into the management vlan. This is how it worked for me. Is there another or much secure way ? Thx for your help.
I recently just received my UDM PRO and I am very excited to incorporate VLANs into my home network. Unfortunately, the Unifi console has changed quite of bit since this video was made. Any chance an update or a second video can be made for the new version of the Unifi Console (v 6.2.26)... pretty please.
I have an ASUS GT- AC5300 Rapture. This device does not allow VLANS. I am wondering if the Dream Machine Pro plays nice with my router so I can set up VLANS? Eventually I would like to go all in with Ubiquity it I cannot right now........but eventually.
I'm about to lose my job because they can't get a damn VPN to connect through my UDM pro, I think I can use this to create a Vlan for DMZ that can bypass all the routers security. I'm going to give it a try, thank you for posting this.
Does anyone know that max number of Vlan Interfaces for the UDM Pro? Can't seem to find this anywhere for this product, even on its datasheet. I can however find this info for some of the Edge Switch Datasheets which state 15 VLan Interfaces for them.
Would you consider the UDM Pro as a possible corporate device or do you have any recommendations for something similar for a small to medium sized corporate network?
Has any one figured out how to properly get mDNS working across VLANs? It appears out of the box mDNS reflector capability does not work properly and some posting is suggesting installing a Podman reflector container on the UDM Pro. To me this is the biggest flaw of this equipment
Hello Jer, I just can't Imagine how could you leave the CLI behind and switch to using web interface. I remember one of your videos where you were trying to telnet in to one of your switches and telnet was not activated. That was a real shock that time lolz.
Thanks, very good video. And if we have UBNT Wifi how can we apply also the same VLAN in the network and Wifi ? For example for IOT to be all together Wifi or not :-)
Nice Video Jeremy! You’ve done a great job with setting up 10G networking at home. One question... You can edit the switch port profile on the UDM Pro right? I would love to buy a UDM Pro, only of I can change the port profiles on it. Thanks for your information. See you in the next video!!😃
New Jeremy video! Off topic but I'm trying to think (tough task), have I been watching you, counting Nugs, for 15 years?!? Dude! Still bringing it thanks! New viewers, I have earned many dollars using what this gent teaches. Listen you should :)
To my knowledge RUclips has not reduced the quality but changed the default quality settings. I watch other RUclipsrs with newly uploaded videos that are 1080p and above.
The problem! No markup......zero tech support. beware anyone thinking about using ubiquiti products. The only support you will ever get is through other installers. As they have no support. You'll try chat only to wait and wait and wait. Then when you get someone they may have no actually field time. So something you think will take a minute or two ...well lets just say you will be saying are you kidding me! Beware. It can be great stuff, BUTT! you may want to look to a company that allows for at least some profit so you can afford the warranty issue should it arise. Zero Profit ...............you have to rely soley on labor rate. That will pay for the truck,insurance and a little salary....as the Joe Walsh album is titled But SeriouslyFolks!
Do you have a link to a 1080p video? It's hard to read the screen with 480p. Thanks!
Trying to follow this , but frankly quite painful on 480p resolution. Why Jeremy, why? Could you not at least bump to 720p?
in this day and age, there should never be a video in 480P. I can barely read your screen
I don't know if you can help me but I'm having an issue with UpnP on my Blue Iris PC that it and all of my cameras are on. I can not get UpnP allow me to setup the web server on BI. I have used this software for years and it was never an issues until I installed a complete end to end Unifi network. Setting up Vlans were easy, but I would like to use my Phone to check in on my cameras and I can't to work even on my Lan. I love my UDM Pro except this issue I have checked the UpnP setting for that Vlan so I don't understand why it won't add the rule. Hope to hear back from you.
I have one Question? How im going to assign a different and tagged management vlan in the udm pro? The only way I found to do this was to assign a firewall rule from the tagged management vlan to the ip address of the controller. Then assign a block rule before the allow rule, blocking port 80,443 and 22. Then change each device into the management vlan. This is how it worked for me. Is there another or much secure way ? Thx for your help.
I recently just received my UDM PRO and I am very excited to incorporate VLANs into my home network. Unfortunately, the Unifi console has changed quite of bit since this video was made. Any chance an update or a second video can be made for the new version of the Unifi Console (v 6.2.26)... pretty please.
why 480p?
Can you do a tutorial on firewall setup and wifi setup
I have an ASUS GT- AC5300 Rapture. This device does not allow VLANS. I am wondering if the Dream Machine Pro plays nice with my router so I can set up VLANS? Eventually I would like to go all in with Ubiquity it I cannot right now........but eventually.
So can I choose different native VLAN on each profile? Or only ONE native VLAN for all profiles? Thank you.
I have only the Dream Machine and these options are not available there.
Can you dynamically assign a switch port on UDM-Pro as a DMZ or a VLAN?
Do you know if you can setup sub-intercface. I need to setup one interface with three vlans.
Nice fancy GUI but can we create vlan and modify switchport with cli? Or even API rest?
I'm about to lose my job because they can't get a damn VPN to connect through my UDM pro, I think I can use this to create a Vlan for DMZ that can bypass all the routers security. I'm going to give it a try, thank you for posting this.
Is it just me or can everyone only view this video in 480p? Makes it hard to use full screen to watch the video without it being all blurry.....
just bought the dream machine and new switch and love it! Camera and hard drive is next. Keep up the great work Jeremy
Does anyone know that max number of Vlan Interfaces for the UDM Pro? Can't seem to find this anywhere for this product, even on its datasheet. I can however find this info for some of the Edge Switch Datasheets which state 15 VLan Interfaces for them.
Would you consider the UDM Pro as a possible corporate device or do you have any recommendations for something similar for a small to medium sized corporate network?
i have a UDM PRO and My ISP can Upgrade My Connection to 2.5Gb bat The SFP+ WAN2 Port is Only 1Gb or 10Gb why cant I negotiate to 2.5Gb or 5Gb
Has any one figured out how to properly get mDNS working across VLANs? It appears out of the box mDNS reflector capability does not work properly and some posting is suggesting installing a Podman reflector container on the UDM Pro. To me this is the biggest flaw of this equipment
Great video as always, Jeremy. Thank you. Loved the Network Diagram Tool. Mind sharing its name? Thx.
Lucidchart.com
@@Viatto Perfect. Thank you again, Jeremy.
Is this Interface a different one that you would find in the Dream Machine? (Non Pro )
Could you do how to access UDM remotely?
Please can you update the video with new software and video quality..
I enjoy the Ubiquiti videos, keep it going Jeremy!!! Thanks!!!
I'm interested in taking a few of your courses but may need a combination of several, how do i contact you to explain
My settings doesn't look like that... and i'm in the new view...
Why does this video only have 23 pixles? Dream machine sfp+ ports don't work.
Hello Jer,
I just can't Imagine how could you leave the CLI behind and switch to using web interface. I remember one of your videos where you were trying to telnet in to one of your switches and telnet was not activated. That was a real shock that time lolz.
Great video, super helpful
Hi Jeremy, do you recommend to install a UDM pro in a small branch office (10 users, 10 PC's, 2 printers, 5 AP's) ??
I would
oh thank i was trying to figure how to configure one port which is poe switch non unifi, ur video help alot. i had avaya phone need to set own ip..
Glad I could help
How do you use QoS on Unifi OS should be another video?
Thanks, very good video.
And if we have UBNT Wifi how can we apply also the same VLAN in the network and Wifi ?
For example for IOT to be all together Wifi or not :-)
What software do you use for drawing your network diagrams?
Looks like DrawIO
@@kosybro5822 Thanks
Good video, although it's a shame the UDM-PRO has fallen way short as a product.
Nice Video Jeremy! You’ve done a great job with setting up 10G networking at home. One question... You can edit the switch port profile on the UDM Pro right? I would love to buy a UDM Pro, only of I can change the port profiles on it. Thanks for your information. See you in the next video!!😃
Yep - have a look: twitter.com/CioaraJeremy/status/1253825791483232263/photo/1
Keeping IT Simple Thank you very much for the information! I’ll buy the UDM this year! Have a nice day😃
New Jeremy video! Off topic but I'm trying to think (tough task), have I been watching you, counting Nugs, for 15 years?!? Dude! Still bringing it thanks! New viewers, I have earned many dollars using what this gent teaches. Listen you should :)
Why didn’t you use profile All? It has LAN as native and your new vlan 20 as tagged
Can’t modify “All” later if needed.
Keeping IT Simple true didn’t think of that
Video resolution higher than 480P would have made this somewhat useful.
Jeremy, can you make video about acl for vpns? I need vpn and restrict users to access just specific vlans from vpn. Thx.
Hello, Can you create a video on creating a DMZ on the DMZ-Pro? I need to have my ISP router open to the Internet. Thanks
If anybody having issues, I found native and tagged are reversed in the video and many others. DHCP Wasn't working until swapped.
Well, apparently your video network is not performing so well if you are uploading 480p video....
Hello Jer, Great videos thank you so much for you effort for teaching us
I thought we were assigning vlans on a dreamworks machine pro? A switch is not the dreamworks machine pro.
Thanks for the video
480p Max Resolution !?!?!? :(
Thank you very much Jeremy for the clear explanation you made , its help me a lot my supper teacher. I really appreciate.
Hi Jeremy, love your videos! I just wish they were a higher quality
RUclips ha reduced the quality of new uploads due to the coronavirus.
To my knowledge RUclips has not reduced the quality but changed the default quality settings. I watch other RUclipsrs with newly uploaded videos that are 1080p and above.
a 480P video. really? in 2020?
that was wrong and didn't work.... this is for vlan only, no dhcp working, no internet... smh
OMG, nothing NEW with the network options, all the same as has been for years. Stop screwing around with the "Trunk" switch-port, bloody fiddler.
The problem!
No markup......zero tech support. beware anyone thinking about using ubiquiti products. The only support you will ever get is through other installers. As they have no support. You'll try chat only to wait and wait and wait. Then when you get someone they may have no actually field time. So something you think will take a minute or two ...well lets just say you will be saying are you kidding me! Beware. It can be great stuff, BUTT! you may want to look to a company that allows for at least some profit so you can afford the warranty issue should it arise. Zero Profit ...............you have to rely soley on labor rate. That will pay for the truck,insurance and a little salary....as the Joe Walsh album is titled But SeriouslyFolks!
U speak rapidly