*Brake Pads Details and Alternatives: For Non ABS model: Bybre calipers. Aftermarket vesrah pads are available which are not really worth the price point. EBC pads are also available which are costly. If on a tighter budget Bajaj Pulsar 220s brake pads can be used by slightly cutting some brake material off. It can damage the rotor disk and can thus degrade the life if not done properly. Also RE650s brake pads can be used. Honda stock non abs brake pads cost around 1000rs in Front and Rear. It's good for the higher price with better quality. Recommended. For C-ABS (Combined ABS): Nissin 3 piston calipers are used here in front. The stock honda cbr sintered pads costs higher. Front: 2000rs approx Rear: 1500rs approx (same for Dual channel abs model Nissin caliper) Alternatively, stock BS3 honda hornet's 160r brake pads can be used which costs lesser (Rs.700 approx) For Dual Channel ABS: Nissin 2 piston caliper is used in the Front. Honda stock brake pads costs a Bomb to replace - Rs.4300 approx. Alternatively, stock honda highness front brake pads can be used which costs Rs.800 approx. Rear: 1500rs approx (same as C-ABS Nissin caliper) *Coolant reservoir: Cbr250s coolant reservoir is located in the bottom region of the bike in the middle which can be damaged by small stones hit or even heat exchange happening. So pls check the coolant reservoir periodically. If damaged and without any coolant in it change it. Costs approx 100rs only. Coolant qty: approx 1.1lt 800ml - radiator 200-150ml - reservoir * Mechanical Oil Seal As already mentioned in the video, weep hole is present here unlike KTM/Bajaj model bikes that can show when the coolant and oil is mixing due to rupture in mechanical oil seal. If there are signs of leakage, change the mech. Oil seal immediately. Part is a bit difficult to procure and is costly - approx 2000rs. * Wheel/sprocket bearing sizes: Recommended to change every 25k-30k kms in Indian road conditions Front wheel: 2 pcs - 6302 -2Z Rear wheel/sprocket: 6203 -2Z 6204 -2Z 6303 - 2Z/C3 Fork oil: Recommended to change fork oil once in 15k-20k kms. Fork oil qty per leg: 331ml Fork oil seal: approx price: Rs 305. (Change in pairs) Thanks! Sridhar K (CBR 250 R Owner) Chennai
Bro, thanks for all the info. Adding on : RE Himalayan rear brake pads are direct fit for non abs CBR 250. (No adjustments needed, have been using since last two years).
Hi Sridhar, I am a CBR250rR C-ABS owner since 2012. Off lately, my brake pads have started wearing out within 10,000 kms (front as well as back). Earlier it used to go 15,000 easily. There are no scratches on the disc. What can potentially be the issue ? Ofcourse my braking habits havent changed much. I use both the brakes simultaeneously most of the times. Also, compared to before, my coneset seems to go bad within 10,000 kms too which wasnt the case earlier. Riding style and conditions have been more or less the same in last 11 years. No significant difference in the way the bike is treated by me.
Enna bro solluringa 2L km ha That’s amazing I had the older version which I bought it for secondhand.. Later, I sold it and bought the bs4 version It’s been 5years, have completed 22k km.. Hoping to ride more with this beauty.. 🎉Cheers
Brake pad for CABS cost around 2200 Rs, Bs4 Abs varient brake pad cost around 4000 rupess , alternative available at the rate of 1500 Non Abs cost somewhere less than 1500
CBR means Cross Beam Racer . Engine Frame Cross la engine setting airuku . That's why it got its name . Engine placed on Cross Beam of the Frame . And performance and body balance ku best bike ...
Honda Unicorn bs6 maintenance podunga old unicorn mathri reliable ah iruka mattudhu bro, so neenga new model service and maintenance tips mathudhu yellam sonninga users ku helpful ah irukum bro
Internal parts you can get those from the Service center but in case of any mishap and you have damaged your Fairings and Outer plastics, then just forget it. My friend's been trying to get fairings for his Red CBR for the past 2 months. Oh and if you have the REPSOL edition, just remove those fairings if you have damaged them. Kedaikave kedaikathu (Personal experience) 😂😂😂
Bro uinga video ellame super but ninga oru shop ahh recommend pannun pothu antha Shop oda link or address discription poduinga athu neraiya perku use full ahh erukkun
DM for service:
instagram.com/prostreet_automotive/?hl=en
Location: www.google.com/maps/place/13%C2%B005'59.8%22N+80%C2%B009'38.8%22E/@13.0999369,80.1586002,17z/data=!3m1!4b1!4m4!3m3!8m2!3d13.0999369!4d80.1607889?q=13.0999369,80.1607889&coh=164777&entry=tt
Cbr Bike sale'ku irukka bro???
One of the Most underrated RUclips channel in the world
Kandipa bro
I totally agree on this the true motor enthusiasts 🔥
Yes bro
I agree 👍
*Brake Pads Details and Alternatives:
For Non ABS model:
Bybre calipers. Aftermarket vesrah pads are available which are not really worth the price point. EBC pads are also available which are costly.
If on a tighter budget Bajaj Pulsar 220s brake pads can be used by slightly cutting some brake material off. It can damage the rotor disk and can thus degrade the life if not done properly. Also RE650s brake pads can be used.
Honda stock non abs brake pads cost around 1000rs in Front and Rear. It's good for the higher price with better quality. Recommended.
For C-ABS (Combined ABS):
Nissin 3 piston calipers are used here in front. The stock honda cbr sintered pads costs higher.
Front: 2000rs approx
Rear: 1500rs approx (same for Dual channel abs model Nissin caliper)
Alternatively, stock BS3 honda hornet's 160r brake pads can be used which costs lesser (Rs.700 approx)
For Dual Channel ABS:
Nissin 2 piston caliper is used in the Front.
Honda stock brake pads costs a Bomb to replace - Rs.4300 approx.
Alternatively, stock honda highness front brake pads can be used which costs Rs.800 approx.
Rear: 1500rs approx (same as C-ABS Nissin caliper)
*Coolant reservoir:
Cbr250s coolant reservoir is located in the bottom region of the bike in the middle which can be damaged by small stones hit or even heat exchange happening. So pls check the coolant reservoir periodically. If damaged and without any coolant in it change it. Costs approx 100rs only.
Coolant qty: approx 1.1lt
800ml - radiator
200-150ml - reservoir
* Mechanical Oil Seal
As already mentioned in the video, weep hole is present here unlike KTM/Bajaj model bikes that can show when the coolant and oil is mixing due to rupture in mechanical oil seal. If there are signs of leakage, change the mech. Oil seal immediately. Part is a bit difficult to procure and is costly - approx 2000rs.
* Wheel/sprocket bearing sizes:
Recommended to change every 25k-30k kms in Indian road conditions
Front wheel:
2 pcs - 6302 -2Z
Rear wheel/sprocket:
6203 -2Z
6204 -2Z
6303 - 2Z/C3
Fork oil:
Recommended to change fork oil once in 15k-20k kms.
Fork oil qty per leg: 331ml
Fork oil seal: approx price: Rs 305. (Change in pairs)
Thanks!
Sridhar K (CBR 250 R Owner)
Chennai
Which brake pad is best for non abs bro?
@@randm2901 I haven't tried any brake pads other than honda OEM. OEM Is costlier than Bajaj, re and all. But its performing good.
Bro, thanks for all the info.
Adding on : RE Himalayan rear brake pads are direct fit for non abs CBR 250. (No adjustments needed, have been using since last two years).
Hi Sridhar, I am a CBR250rR C-ABS owner since 2012. Off lately, my brake pads have started wearing out within 10,000 kms (front as well as back). Earlier it used to go 15,000 easily. There are no scratches on the disc. What can potentially be the issue ? Ofcourse my braking habits havent changed much. I use both the brakes simultaeneously most of the times. Also, compared to before, my coneset seems to go bad within 10,000 kms too which wasnt the case earlier. Riding style and conditions have been more or less the same in last 11 years. No significant difference in the way the bike is treated by me.
Fork oil seal buying link
I am a Cbr 250r owner, what you said absolutely right. The bike is very smooth low maintenance.
7:56 it's not cornering ABS, it's combined ABS.
Ennude cbr 200000km complet but ennum puli 💯💯💯🔥🔥2011model
Enna bro solluringa
2L km ha
That’s amazing
I had the older version which I bought it for secondhand.. Later, I sold it and bought the bs4 version
It’s been 5years, have completed 22k km..
Hoping to ride more with this beauty.. 🎉Cheers
Most informative video for CBR 250 when I'm planning to buy an used one.. cheers to Revnitro🔥🎉
Thanks for the CBR250R Maintaineance Update .Brother
U people are the best, period.
When you covered the topic of Weep hole leakage, it proved you people know stuffs in and out.
2 wheeler Maintenance cost segment wise/ brand wise update kodunga. Romba helpfula irikkum.
We have special crew for CBR bike - Thanks for the video
Crew name bro??
Brake pad for CABS cost around 2200 Rs, Bs4 Abs varient brake pad cost around 4000 rupess , alternative available at the rate of 1500
Non Abs cost somewhere less than 1500
You can use the Pulsar 220's back brake pad for Non-ABS CBR. Costs around 350-400
@@ShasthriSubramaniam yes. But make sure u remove some brake material before installing. If not done properly can lead to disc damage
*Bro.. Pulsar 220F ku oru maintenance video podunga bro❤️waiting for the Speed King from ur way😉👊*
Bro yamaha r15 v3/v4 maintenance video poduga
03:25
KTM owners be like : கண்ணாயிரம் அந்த Drill machine ன எடு 😂
Dinesh army 🔥
Ayya apdiye R15/MT15 ku oru maintenance video potingana nalla irukum ayya
I have tuned my CBR250 in moto tune with the help of Revnitro....power is awesome...Thank you Revnitro❤
Price & maileage
Hi bro
@@abilashappu3977 Price - 10,000...Mileage - 35 to 38
@@dineshbabu2342 Hi bro
@@vigneshsivasakthi8184 evolo bro meailage tharuthu tuned after
Thank you so much for doing this bro. Please keep this legendary bike alive by doing what you are doing.
Royal Enfield bikes maintanence video much needed..
CBR means Cross Beam Racer . Engine Frame Cross la engine setting airuku . That's why it got its name . Engine placed on Cross Beam of the Frame . And performance and body balance ku best bike ...
Bro do R15 v4 and mt15 maintenance bro
Bro sf 250 video podunga
Dani bro ns 200 maintaineance video podunga bro
Hope the next one will be R15's maintenance video
Honda Unicorn bs6 maintenance podunga old unicorn mathri reliable ah iruka mattudhu bro, so neenga new model service and maintenance tips mathudhu yellam sonninga users ku helpful ah irukum bro
Himalayan ku oru video podunga ♥️♥️
Ide mari r15 V2 oru maintenance video poduga anna
Super bro. Am one of the owner of cbr250r
Bro review V Strom SX.
Thanks
The Topics you cover in your videos are interesting but please add English subtitles so all can understand.
R15 v3 maintenance vid pls
Bro Yamaha R15 V3 maintenance video next pannuga please
Final touch subscribe comedy vera level 😂😂😂
Bro Honda Xblade pathe video poduga
Underrated Iconic Beast CBR250R❤️❤️❤️
R15 v2 maintenance video panunga bro🤩🤩🤩
I got my R15 v2 bought 7 years ago today♥️♥️♥️
Yes nanum ketuten ..
Bro Yamaha R15 v3,v4 intha maari video podungaa
Bro please make a video on maintenance of gt 650
Apache 200 maintenance tips and modifications tips
Appdiyea fz25 ku oru maintenance video podunga bro❤️
Bro suzuki gixxer 250 sf. Oru maintainance video brooo
R15S maintenance video potugha bro
Bro ns and rs podunga
Bro dominar 250 maintenance pathi sollunga
Bro pulsar 220f maintenance video bro pls
R15 v3 maintenance podunga broo 😌🙂
More !! More !! Eager to learn a lot guys!!
Bro yezdi, perak or mojo maintenance pls it will cover most of the audience.
Royalenfield maintenance pathi podunga bro
Do a detailed vedio about pulsar N160 2024 updated version with E20 and fully digital meter
Veralevel brother,all d best
Internal parts you can get those from the Service center but in case of any mishap and you have damaged your Fairings and Outer plastics, then just forget it. My friend's been trying to get fairings for his Red CBR for the past 2 months.
Oh and if you have the REPSOL edition, just remove those fairings if you have damaged them. Kedaikave kedaikathu (Personal experience) 😂😂😂
For red and silver color edition also
Please post one for Pulsar 220
How to maintain karizma zmr bike separate video bro
Dominar 250 ku podunga bro
Apadiyeah pulser Kum solluga bro ❤️🔥
Bro... Pulsar 180 bs3 pathi podunga
Bro Suzuki 250's engine maintenance pathee podunga bro ❤️
Bro yamaha series kum podunga 🌚
Waiting for dominar400's video!
Will you be interested to recommend a good bike technician for periodic service?
Pulser F250 maintenance tip podunga nanba❤️
Dominar 400 pathi solunga bro
Appadeye cbr150r podunga bro.
Tq for given valuable details about a cbr250r
Bro , Please post video on Maintenance on Pulsar 200 CC series
CBR 250 oru ride panni review pannunga Bro please apo tha bike pathi ellarumkum theriyum bro neenga review panna mass irukum please Pannunga
Can you please do the same for dominar 400
2016 combined ABS brake pad front 2000rs and back 1500rs
Bro NS 200 video podunga bro, for carborator
Bro jawa yezdi ku maintenance tips video podunga bro
Bro 2018 model cbr le gasket oil leakage problem ikkirethu pathi solle illeye
Bro bike disk brake constant rubbing problem pathi video poduga
Bajaj dominar 400 engine quality video bro please
Bro v3 ah podunga bro
Bro do this video fro r15 v3, v4 also
Gixxer SF 250 ku podunga
Ns200 maintenance video podunga nanbargale
Best explanation video guys
Bro gixxer sf 250 patthi oru video pannunga
Herohonda karizma r video poduga bro
R15 v3 ku podunga thala
Bro please r15 or mt podunga useful for everyone
Bro do on apache 200 4v
Bro r15v3 podunga brooooooooo plsssssss
Bro uinga video ellame super but ninga oru shop ahh recommend pannun pothu antha Shop oda link or address discription poduinga athu neraiya perku use full ahh erukkun
g.co/kgs/944mzo
Bro Mt-15 ikku maintenance video podunga bro
bro kindly make a debate about ford ecosport pls
Scooter maintenance video podunga bro 🛵🛵🛵
Sf250 review pls
R15 V2 ku video poduga bro
Much needed✨
Bro R15 V3 full maintenance video paninuga we hope the next video R15 's
Bro RR310 ku maintenance video podunga broo plzzz 🤗
CBR tuning price bro?
mahindra mojo ku video pannunga pls
R15 v4 maintainance video bro🙃🙃
You can cruise at 140 without vibration
Bro mt15 V2 ku Maintenance video podunga
Bro rs200 pathi oru video podunga bro
Gixxer sf 250 ku sprocket change and tunning panna mudiyuma? Plz post a video