I have a 2014 giant Talon 29er Mountain bike. After two years I kept throwing my chain, I had about 1800 miles on the chain and cassette .I couldn't understand why it was free peddling and not going into gear when I was trying to go Up Steephill I noticed the cassette had about a half inch of play in all the rear sprockets and the locking ring was loose. I tried to finger tight it to get it back to the truck. Coincidentally after I got it back together after about seven revolutions on the pedals the chain broke. Lol.. This video was very informative so now I can get it back together and throw some studded snow tires on it!!
excellent video, with very knowledgeable and helpful comments that made it easy for my son and I to do this job on my road bike. Thank-you very much. 10/10. Also great camera work.
Also, I saw another tutorial stating to put grease on the lock ring's threads to make removal of the cassette easier, do you think this is a good idea?
Good video very well explained however I question the torque on the lock ring, shimano at least recommends 40nm. I know there are many ways of doing things but your recommendation is so far out from the manufacturers that I thought it was worth noting.
You should test ride a trek full suspension (specifically the full floater). It feels awesome! No brake jack and a very plush ride. Feels like you have endless travel. If I'm not mistaken, the giants don't have brake jack either. The only Downside is if you are an aggressive rider, it blows through travel because of its drcv rear shock. This is easily solved by a special air volume reducer by Push.
I know that cassettes are better because they do not wobble like freewheels do, but Are they spinning faster than freewheels? I have 26" MTB, no suspension, 21 speed(7speed freewheel) and very soon I'll put on a pair of slick tires. I am building it mainly for the road. I know that all road bikes have cassettes and I am interested to know if they have any speed advantages over freewheels, because I am seriously considering of conversion.
Clint Gibbs, Good idea I ride in the dirt a little but I only have grass and grass is hard to peddle in but I'm going to buy a 1960 bike mirror for my bike so I don't get hit from behind
Good video. Should the free-hub body have some play(mine spins ok, but it moves/plays side to side a bit)? If not, what could be the problem(s) and fix(s)?
thanks. have you ever seen a little thin washer that goes behind the lock ring (between teeth on lock ring and free hub)? mine has it when i removed. not sure if it's necessary. its quite beat up
Those washers are typically use on freehubs that can handle a SRAM 11 speed cassette. You have to use the washer with a Shimano cassette since the spacing is a little bit more narrow. With a SRAM 11 you would take it off.
Most of the wear on my cassette is on two or three of my smaller cogs-mostly one. Is it possible to change out only the worn cogs? I hate the thought that I’m adding 3-4 times as much material to the landfill as necessary.
Hey there, great video. I have a question. I removed my mtb wheel because I noticed it makes a little noise when peddaling so I wanted to check what was the noise. I've noticed that the cassette is moving slightly, left and right. Is it normal to do that? Does it need to be tighten a bit or it needs to be changed? I have the bike for 1 and half years, so its fairly new. I've been riding it in ruff terrain in the mountains. I want to fix this myself.
Jack Lower , yes, I only have Giants right now. My LBS sells Giant, Niner and Orbea. I'm really testing 27.5 this year and Giant is on the forefront right now with 27.5.
hi Clint. great video. I have a question: I have a 3*9 bike and I want to convert it to a 3*10. is a new cassette and derailleur all I need? some told me yes and some told me no. what are some factors to take into consideration when upgrading the drivetrain to make sure everything works, there were also a lot of number on different model of cassette and wheels and casets such as spacing, tooth. idk what those mean. please help thanks
+Clint Gibbs hi tysm! but some people told me different hubs and free hubs support different cassettes and there is also smt called spacing and tooth number? I'm confused. thanks.
Ohh alright tysm!!! srsly this was helpful! Another question I saw your bike wash video, can you tell me which are the places I shouldnt be using the jet mode? Like where r the bearing that may get dirt into it? Thnks
Hello, If i have a 7 speed hub (FH-6401), but an 8 speed new cassette, can i just remove the first 11T cog (or some cog in the middle) and screw it on like that?
It's been so long since I've worked with cassette like that I think you're going to have to run that by your local shop. There's chance the 8 speed cassette will fit on a 7-speed free hub but I would verify.
No, all cassettes are different sizes, such as 6, 7, 8 speed and such. You'll need to replace your cassette with an identical cassette, or else you may have to change out your deraileur, crank, and new levers to match.
+nathan hoover I'm not sure of the exact mechanics on whether it stretches or the teeth get worn down, but if you wait too long with a chain then a new chain won't work on an old cassette. The chain will skip under heavy loads.
+Clint Gibbs OK I was just wondering. I was getting ready to start buying parts and I got confused when you said that the cassette stretches. thanks for helping me out
+harrylook the spacers are all the same size so really doesn't matter which ones go where. When you are putting the cassette together it's pretty obvious which ones require spacers and which ones don't.
Shimano cassettes shouldn't need a spacer. SRAM 10 speed will need a spacer if the free hub body is designed for 11 speed. Of course SRAM 11-speed would not need a spacer.
You will know you need a spacer if the cassette lock ring does not fully engage and keep the cassette tight. Or you know you don't need a spacer if when you put the spacer on you do not have enough threads to be able to put the cassette lock ring on.
Dang I bought my bike in 2012 very beautiful bike it's a mountain bike and it's been threw a lot.. and I almost got hit by a car on the road who almost killed me going over the speed limit on the wrong side of the road and they laughed at me... people can be ass holes some times am I right?
I have a 2014 giant Talon 29er Mountain bike. After two years I kept throwing my chain, I had about 1800 miles on the chain and cassette .I couldn't understand why it was free peddling and not going into gear when I was trying to go Up Steephill I noticed the cassette had about a half inch of play in all the rear sprockets and the locking ring was loose. I tried to finger tight it to get it back to the truck. Coincidentally after I got it back together after about seven revolutions on the pedals the chain broke. Lol.. This video was very informative so now I can get it back together and throw some studded snow tires on it!!
The trick of using the QR to hold the tool in place is brill!! Thanks to yu i've finally been able to replace my dodgy cassette! Thanks!!
Sir, your channel is a goldmine of useful information! Thank you for uploading!
excellent video, with very knowledgeable and helpful comments that made it easy for my son and I to do this job on my road bike. Thank-you very much. 10/10. Also great camera work.
Great information, great job warning us of ease of crossthreading the lock ring, excellent video production and delieverance! Thanks from Texas!
Also, I saw another tutorial stating to put grease on the lock ring's threads to make removal of the cassette easier, do you think this is a good idea?
Good video very well explained however I question the torque on the lock ring, shimano at least recommends 40nm. I know there are many ways of doing things but your recommendation is so far out from the manufacturers that I thought it was worth noting.
For some reason, mine says sihmano, my dads says shimano. Are they the same thing?
Great video! I found it very helpful. Thank you for taking the time to make it.
Excellent explanation. Thanks for taking the time.
Clear, and direct to the point. Thank you
You should test ride a trek full suspension (specifically the full floater). It feels awesome! No brake jack and a very plush ride. Feels like you have endless travel. If I'm not mistaken, the giants don't have brake jack either. The only Downside is if you are an aggressive rider, it blows through travel because of its drcv rear shock. This is easily solved by a special air volume reducer by Push.
I know that cassettes are better because they do not wobble like freewheels do, but Are they spinning faster than freewheels? I have 26" MTB, no suspension, 21 speed(7speed freewheel) and very soon I'll put on a pair of slick tires. I am building it mainly for the road. I know that all road bikes have cassettes and I am interested to know if they have any speed advantages over freewheels, because I am seriously considering of conversion.
Clint Gibbs, Good idea I ride in the dirt a little but I only have grass and grass is hard to peddle in but I'm going to buy a 1960 bike mirror for my bike so I don't get hit from behind
Tank you for this nice video. It is perfectly clear.
Dude, you are a lifesaver.
You have to use torque meter :)
very good video... anyone can do it wisely... thank you
Great Video
Good video. Should the free-hub body have some play(mine spins ok, but it moves/plays side to side a bit)? If not, what could be the problem(s) and fix(s)?
No, there should not be any play in the freehub when you move the cassette. Either the free hub bearings are wearing out or the axle is loose.
thanks. have you ever seen a little thin washer that goes behind the lock ring (between teeth on lock ring and free hub)? mine has it when i removed. not sure if it's necessary. its quite beat up
Those washers are typically use on freehubs that can handle a SRAM 11 speed cassette. You have to use the washer with a Shimano cassette since the spacing is a little bit more narrow. With a SRAM 11 you would take it off.
Are all the Lockring tools the same.
Hi Clint what bike will you be racing on this season?
Isaac Fleming , I'm going to be on a Giant Anthem 27.5. I'm waiting for some parts to come in. I should have it complete in a few weeks.
Awesome sounds great, I am getting keen to see your review!
Most of the wear on my cassette is on two or three of my smaller cogs-mostly one. Is it possible to change out only the worn cogs? I hate the thought that I’m adding 3-4 times as much material to the landfill as necessary.
I'm actually not sure of that answer so I would check with your local bike shop. Or maybe do some internet research. It makes sense for sure.
question guys how much are these sprockets for a new one looks like mine is bent at the 3 one down from the top is a easy fix ?
Hey there, great video. I have a question. I removed my mtb wheel because I noticed it makes a little noise when peddaling so I wanted to check what was the noise. I've noticed that the cassette is moving slightly, left and right. Is it normal to do that? Does it need to be tighten a bit or it needs to be changed? I have the bike for 1 and half years, so its fairly new. I've been riding it in ruff terrain in the mountains. I want to fix this myself.
+VNT Clean the outside of the freehub body with WD-40 and reinstall and tighten. Also check your chain ring bolts.
+Clint Gibbs thank you for your fast replay, Clint. Will do that
When reversing a bike should the peddles move backwards .
+Patrick Parker yes
Thanks for the tips.
Isn't it necessary to add some grease between the hub and the cassette?
2:02 Tools needed, demonstration begins.
Hey by any chance do you have any treks it seems like you mostly have giants
Jack Lower , yes, I only have Giants right now. My LBS sells Giant, Niner and Orbea. I'm really testing 27.5 this year and Giant is on the forefront right now with 27.5.
hi Clint. great video. I have a question: I have a 3*9 bike and I want to convert it to a 3*10. is a new cassette and derailleur all I need? some told me yes and some told me no. what are some factors to take into consideration when upgrading the drivetrain to make sure everything works, there were also a lot of number on different model of cassette and wheels and casets such as spacing, tooth. idk what those mean. please help thanks
+Random Guy you will also need a 10 speed chain and you will need a new shifter. Other than that you should be fine.
+Clint Gibbs hi tysm! but some people told me different hubs and free hubs support different cassettes and there is also smt called spacing and tooth number? I'm confused. thanks.
Shimano 9 10 and 11 all fit on a standard hub. If you wanted SRAM 11 speed you would need a wider hub.
Ohh alright tysm!!! srsly this was helpful! Another question I saw your bike wash video, can you tell me which are the places I shouldnt be using the jet mode? Like where r the bearing that may get dirt into it? Thnks
Hello, If i have a 7 speed hub (FH-6401), but an 8 speed new cassette, can i just remove the first 11T cog (or some cog in the middle) and screw it on like that?
It's been so long since I've worked with cassette like that I think you're going to have to run that by your local shop. There's chance the 8 speed cassette will fit on a 7-speed free hub but I would verify.
Are all cassette the same size I have a set that is rusted that I plan on changing or cleaning
No, all cassettes are different sizes, such as 6, 7, 8 speed and such. You'll need to replace your cassette with an identical cassette, or else you may have to change out your deraileur, crank, and new levers to match.
7 speed for 7 speed is that ok
OK question. how does a bike cassette stretch? I understand the chain but not the cassette
+nathan hoover I'm not sure of the exact mechanics on whether it stretches or the teeth get worn down, but if you wait too long with a chain then a new chain won't work on an old cassette. The chain will skip under heavy loads.
+Clint Gibbs OK I was just wondering. I was getting ready to start buying parts and I got confused when you said that the cassette stretches. thanks for helping me out
what if you didn't watch this video first and you lost track of where the spacers go? asking for a friend.
+harrylook the spacers are all the same size so really doesn't matter which ones go where. When you are putting the cassette together it's pretty obvious which ones require spacers and which ones don't.
good video!
Tyd uh vdi in b
Lovely
How do you know if you need a spacer
Shimano cassettes shouldn't need a spacer. SRAM 10 speed will need a spacer if the free hub body is designed for 11 speed. Of course SRAM 11-speed would not need a spacer.
I have a SRAM 8speed cassette on a stout/shimano free hub?
You will know you need a spacer if the cassette lock ring does not fully engage and keep the cassette tight. Or you know you don't need a spacer if when you put the spacer on you do not have enough threads to be able to put the cassette lock ring on.
Dang I bought my bike in 2012 very beautiful bike it's a mountain bike and it's been threw a lot.. and I almost got hit by a car on the road who almost killed me going over the speed limit on the wrong side of the road and they laughed at me... people can be ass holes some times am I right?
+Brian Vennett yeah, too many close calls and friends getting hit...I try to keep my tires on dirt as much as possible
Cycle ke chain sikke ko kaise kholte hain aap aasan tarika bataiye
Found out whatE was looking for
nice
why my gear is not coming in first gear it stay til 2 only
We need to change our cassettes in one or two years? Come on man, we're not pros who ride 10k a year.
Edwin
ten lip
is hosam