ZF is one of if not the largest Hydraulics company in the world. They have owned the Sachs brand for 40 years, and just recently rebranded it back to ZF. They have done that with a lot of their products, like steering boxes etc.
I’ve got a 200RR and I love it. As a whole it’s a shame that there are only two companies that make a 200 still. In my opinion it’s the best weekend warrior bike. Nimble like a 125, but a little closer to the grunt of a 250.
I still have a carb on my Beta rr 125 2stroke race Edition runs mint with a 170 up to 500m height difference i never had a problem with running too rich or to lean they are just magicians with their reference what Jets to put in for which elevation 😵💫
200's rule! So thankful Beta now carries the torch. Too bad they don't make lighter bikes. Just sayin'. My 200SX runs a STIC metering block in a Keihin. Has unstoppable lug factor along with wide powerband with big gains in power.
I’ve been in the market for a new bike and comparing the weights of the 250 and 300 bikes BADER is within a couple pounds of all the manufactures, unless somethings different and I’m not aware of it let me know
I WISH I wouldve snagged one of these instead of my Sherco 300se. It's a great bike, but it's a lot to handle on tight technical stuff. Especially if you're shorter
It’s pretty much been proven that the carburetors make more power than the EFI two strokes. Now, if you’re talking about buying a 4strokes, I see what you’re saying, but as far as two strokes go, carburetor is still king and that’s a fact.
Rode a Gas Gas tpi 2021,in comparison to my 23 300rr beta it has no Power from Low and needs way more revs, to feel the same. Yeah ok they run super smooth and even less Vibrations, but i love the beta character... And you can Set it up so nice with the Power valve and caburator ❤
Title is very misleading… hardly any riding, no initial impressions, complained/underestimated the bike before riding it, modified the bike to the moon, all while saying it’s great. This was a very weird video to watch.
Respect OUR riding areas, don't tell people were your riding. We spend a lot of time and money for good riding however, we don't do it for your profits. Think of others instead of your wallet next time you publish a video of others riding area.
I'm loving my 2023 Beta RR200 Racing!!! such a great choice!
Arguably the best build video I've ever watched. Thanks for all of the Beta information. SUBSCRIBED!
Beta is a great European brand! 💯 -Ohio
Dude, you rocked that hill climb that thing looked technical
I've always cut my bars down 1/2 inch on both sides and ran brushgards.
ZF is one of if not the largest Hydraulics company in the world.
They have owned the Sachs brand for 40 years, and just recently rebranded it back to ZF.
They have done that with a lot of their products, like steering boxes etc.
Very cool! May I ask what metering rod are you using in the SC2 with those betas?
Which seat concepts seat did you get, is it a low one?
I’ve got a 200RR and I love it. As a whole it’s a shame that there are only two companies that make a 200 still. In my opinion it’s the best weekend warrior bike. Nimble like a 125, but a little closer to the grunt of a 250.
I still have a carb on my Beta rr 125 2stroke race Edition runs mint with a 170 up to 500m height difference i never had a problem with running too rich or to lean they are just magicians with their reference what Jets to put in for which elevation 😵💫
200 have a great grippy reaction with a 14 front sprocket at 52 rear just wants to hook up and go when you get on the gas but I run cross country
Did you make it up black diamond? My buddy took his drz down with it snowing haha that clay and snow turns into a slip n' slide.
Love everything on build but the tm desighns didn’t have good luck with there products skid plate chain guide non of it beautiful bike nice work
Carburetor old school as hell can you imagine buying a new snowmobile with a carb
200's rule! So thankful Beta now carries the torch. Too bad they don't make lighter bikes. Just sayin'. My 200SX runs a STIC metering block in a Keihin. Has unstoppable lug factor along with wide powerband with big gains in power.
I’ve been in the market for a new bike and comparing the weights of the 250 and 300 bikes BADER is within a couple pounds of all the manufactures, unless somethings different and I’m not aware of it let me know
@@chadrides914 Beeda hasn't yet gone to fi. So more weight to come when they add it.
I would think this would be a great
Hard Enduro bike.
Unfortunately this sounded like an ad for sponsors.
I was into it until the VHMHead, should’ve left it stock and tested it.
Going to look into that oil
Love my 200
8:02 is that a crack on the cylinder?
no
Will you be selling that bike??
Sweet build my man
want one of these next
Giving a review of a 200RE and it’s completely modified from factory motor. Wtf?
I WISH I wouldve snagged one of these instead of my Sherco 300se. It's a great bike, but it's a lot to handle on tight technical stuff. Especially if you're shorter
In my opinion the only people that think 200s don't have enough power are lazy riders lacking skills. Ive one desert races on my old ktm 200.
When Beta goes fuel injection, i'll buy one immediately, but i'm too spoiled by KTM to go back to a carb.
It’s pretty much been proven that the carburetors make more power than the EFI two strokes. Now, if you’re talking about buying a 4strokes, I see what you’re saying, but as far as two strokes go, carburetor is still king and that’s a fact.
Rode a Gas Gas tpi 2021,in comparison to my 23 300rr beta it has no Power from Low and needs way more revs, to feel the same. Yeah ok they run super smooth and even less Vibrations, but i love the beta character... And you can Set it up so nice with the Power valve and caburator ❤
Where is the bashing? Click bait for parts promotion.
Title is very misleading… hardly any riding, no initial impressions, complained/underestimated the bike before riding it, modified the bike to the moon, all while saying it’s great. This was a very weird video to watch.
Respect OUR riding areas, don't tell people were your riding. We spend a lot of time and money for good riding however, we don't do it for your profits. Think of others instead of your wallet next time you publish a video of others riding area.