Just bought mine today for my almost the exact Grand Cherokee same color and everything except mine is a 2019 but looks identical. Limited X 5.7 hemi the guys at Larkin Motors are installing it for me hopefully soon. I’m excited to hear it.
Hey, I've got the same car pretty much, did you leave the big middle muffler in? I'm intending to leave it in, unlike what they did here because I don't want it any louder when in valves closed mode.
Definitely looking forward to getting one of these kits for my next vehicle and it also seemed surreal to see that this video was shot close to my hometown!
Most systems with the key fobs can be programmed to you cars OEM garage door opener buttons. I have seen a few videos of people with exhaust cutout kits doing that.
Just a quick note, make sure you get the correct size diameter tubing for the amount of HP your engine makes. There are HP to diameter tubing calculators out there. 3" dual exhaust for less than 750hp. 2.5" dual exhaust for 500hp and less.
@Luis Islas there are a few schools of thought about that. Even Engine Masters tested it. If you have a 2.5" exhaust already and an engine making roughly 600hp you might gain 5-15 horses (they gained 13hp) on the high end well over 5000rpm. It would be hard to justify redesigning an entire exhaust for relatively minor gains.
I would also like to buy this exhaust. Does it sound almost like the original exhaust when closed? I only want to change the rear silencer and leave the rest as original, as I live in Germany the TÜV will not accept it otherwise:(
@valvetronic Did you guys just do red>red black>black splice split and hardwire tap them into the rear cigar outlet? I did that today on my 2020 Jeep GC SRT and it blows the 20amp fuse under the hood. Curious if you guys did something different with a fuse tap or something?
Do you ya have a shop where ya can install it if I buy it, most of the places won’t know how to connect the vacuums or hardwire it because I don’t have a cig plug in the back
Boston let’s get it.. which exhaust shop did you go to? Seems pretty close to Lou’s. I’m looking into this setup for my AMG GLB35. I did the axle back on my M3 and I agree with you doing the resonator delete they need a little bit more sound but ultimately I like the fact that I can go back to stock sound
How would this sound on a camaro 2015 v6 I live in Texas so a muffler delete is illegal so I’ve been looking for an alternative this is what i have my eyes on
You shouldn't run anything through that vent. It closes when driving so the exhaust that inevitably rolls under the bumper from literally every exhaust ever made doesn't go back into the vehicle cabin 🙄.
Quick question. Want to purchase this for my e39 540 v8. I’ve straight piped the car currently so no cats or mufflers or resonators. It’s way too loud. If I install this, with valves closed and only this will it make it quiet? Close to stock? Or no?
Man this was the only way to get a car legally louder than stock here in Germany and now they out right banned the possibility of getting them homoligated. Realy gotta move to the US lol
Trust me that love you're feeling last about an hour then it turns into a dearly sick version of hate deep in the pit of your soul when you hear everybody and their grandma rolling around in a Honda civic with a loud ass muffler or even worse a work truck loaded with carpet or some other shit all loud as fuck with aftermarket exhaust like it's on its way to a track meet... Shits lame and these types here where you have the option to quiet it down should be required and people who have loud ass exhaust should get a ticket if they're doing it between the hours of like 9pm to 9am or some shit
@@drwombat Yeah it's true I'm in Jersey & guys here do this all day long, I mean some are so loud when they pop it literally sounds like gun shots or machine gun fire, now I do like a nice growl but alot of them are just too loud.
Hey man. Been really interested on putting these on my Mazda 3 2021 2.5 hatchback. Was wondering if you know if it would fit? By the way love the video very professional!
At the end of the video in the parking garage it sounds like the revs are not near as high of rpms when showing valves closed. Also seemed like the launch on the street wasn't near as aggressive when showing valves closed vs open, hmmmm....
How different is the open valve sound compared to as if you were running just straight tubing? Considering getting these but I don't want to lose that raw sound you get with straights.
I didn't know the install with this easy I thought you had to run it to an existing vacuum line on the car. Can you manually open and close the valves? I may just have the exhaust shop put these on and leave the valves closed until I install this myself. Also can I just hook up this box to my exisiting stereo system in my trunk using the acc wire?
Would this make a difference in a v6 2020 Jeep Grand cherokee? I've spent so much money and time doing research and buying different kinds of exhaust systems 5 to he exact
I’m thinking about buying this, however would it work well with my car? It’s a 2019 Acura TLX A-Spec V6 SH-AWD. I know I’d need 2 mufflers but I have no cigarette/charger connector in my trunk like that jeep does. I guess my question is will I have to do some creative installation to get the tubing and the control box to plug up in my trunk?
I had the 18 TLX aspec & what I did was a muffler & resonator delete but in the mid I did a 2.5 inch flowmaster super 10 & one guy told me it sounded like a charger, so this is another option
Did you purchase prefabbed straight/ X pipes for resonator delete ? If so what brand did you order ? I want my 5.7 GC to sound exactly the same so I want to copy exactly what you have installed
Regarding the vacuum line... It wasn't immediately clear to me where it originated? Did you tap into intake vacuum from the snorkel in front of it TB? or maybe on the other end out by the PCV? Then run it all the way down to the trunk? If not, It almost sounds as if you're pulling vacuum from the trunk which is a total mystery to me.
@@valvetronic you heard me waste of Money I’ve had 3 v6 jeeps the best bang for buck is mid Muff delete with xpipe and the rear muffler delete straight pipe with quad tips best overall sound and that’s the loudest ur going to get that v6 to sound too all for 650 bucks total
@@cbruno12180 my question is why do you keep buying piece of shit cars & then removing the exhaust? there's no way that doesn't sound like drone hell dude
do you think this exhaust setup will be just fine with a bit of adjustments to a volvo s60 t5 i’ve been looking at this product for a couple months and was wondering if i should finally buy it
Hey is this muffler quieter than stock when closed and is the open is straight pipes i wanna shoot flames and still be quiet as well. And is there a valved catalytic converter so I can bypass it when I want
Just bought mine today for my almost the exact Grand Cherokee same color and everything except mine is a 2019 but looks identical. Limited X 5.7 hemi the guys at Larkin Motors are installing it for me hopefully soon. I’m excited to hear it.
That’s badass man! The Larkin boys are the greatest!
How is it compared to the stock mufflers with valves closed?
Is it just as quiet as when it was stock? Or a bit louder?
@@arturo8951 it sounds stock when closed.
@@danielsullivan7740 you got ig for vids? Been looking to see difference between valve and corsa catback exhaust for v8 jgc
Hey, I've got the same car pretty much, did you leave the big middle muffler in? I'm intending to leave it in, unlike what they did here because I don't want it any louder when in valves closed mode.
Definitely looking forward to getting one of these kits for my next vehicle and it also seemed surreal to see that this video was shot close to my hometown!
Would it be possible to run valve activation to a 12v switch instead of the wireless fobs?
i have the same question... would be so much more usefull and clean for me...
Most systems with the key fobs can be programmed to you cars OEM garage door opener buttons. I have seen a few videos of people with exhaust cutout kits doing that.
It's easy to do by integrating the remote inside the car and supplying power with a transformer to 5v
i want this for my stupid n/a 4cyl subaru tbh
Just a quick note, make sure you get the correct size diameter tubing for the amount of HP your engine makes. There are HP to diameter tubing calculators out there. 3" dual exhaust for less than 750hp. 2.5" dual exhaust for 500hp and less.
do you know in what scenarios i would need 2 mufflers like in the video?
Wish i had 500hp, barely 305 ideally
2.5 is plenty for even over 600+ let alone 750. It’s not till the big big numbers you really need it
@@mcintosh.motors Not according to exhaust size calculators
@Luis Islas there are a few schools of thought about that. Even Engine Masters tested it. If you have a 2.5" exhaust already and an engine making roughly 600hp you might gain 5-15 horses (they gained 13hp) on the high end well over 5000rpm.
It would be hard to justify redesigning an entire exhaust for relatively minor gains.
I would also like to buy this exhaust. Does it sound almost like the original exhaust when closed? I only want to change the rear silencer and leave the rest as original, as I live in Germany the TÜV will not accept it otherwise:(
Yes! Just like factory sound!
Is the catalytic converter still in there
@valvetronic Did you guys just do red>red black>black splice split and hardwire tap them into the rear cigar outlet? I did that today on my 2020 Jeep GC SRT and it blows the 20amp fuse under the hood. Curious if you guys did something different with a fuse tap or something?
WHAT ABOUT THESE FOR A 1972 CORVETTE 383 / 450 HP? 2.5" PIPES...
Do you ya have a shop where ya can install it if I buy it, most of the places won’t know how to connect the vacuums or hardwire it because I don’t have a cig plug in the back
Have a 15’ 5.0 f150, it has a factory 2.5” exhaust pipe. Should I get the 2.5” or 3” valvetronic muffler?
Boston let’s get it.. which exhaust shop did you go to? Seems pretty close to Lou’s. I’m looking into this setup for my AMG GLB35. I did the axle back on my M3 and I agree with you doing the resonator delete they need a little bit more sound but ultimately I like the fact that I can go back to stock sound
Lous is one of our dealers! They install our universals for many people
How would this sound on a camaro 2015 v6 I live in Texas so a muffler delete is illegal so I’ve been looking for an alternative this is what i have my eyes on
Will sound great! Will sound similar to this jeep as it is a V6 as well
You shouldn't run anything through that vent. It closes when driving so the exhaust that inevitably rolls under the bumper from literally every exhaust ever made doesn't go back into the vehicle cabin 🙄.
there are other places to run the line! if you don’t want to use the vents you can use another spot
Can this be used on a 240sx 4 cylinder turbo?
Yes it csn
How much does each muffler weigh?
What's the warranty, durability and serviceability of these units?
Just ordered these off Amazon & I purchased the 4 year warranty for $69.99
Is that v6 or v8
Yall ship to Ireland?
I'd like to install the universal valtronic mufflers on a 21 TLX type s, would it sound much louder than factory?
Yes much louder
@@valvetronic I've gotta get this then. Thx for vid
Quick question. Want to purchase this for my e39 540 v8. I’ve straight piped the car currently so no cats or mufflers or resonators. It’s way too loud. If I install this, with valves closed and only this will it make it quiet? Close to stock? Or no?
Yes! With valves closed it'll sound very similar to stock
Any idea if this would work on a 2022 Genesis G70 2.0 trying to find something???
It should work
How do you setup the keyfob ? Do you have to use 1 keyfob or 2 cause your using 2 mufflers in this case??..
Only 1. We provide a connector that allows all vacuum lines to be connected as 1
You never showed how to hardwire it
would this fit on an 08 solstice
yes!
So it’s still a muffler even with it open.
correct
Great video; but those are some of the worst welds I have ever seen... just awful.
Can I put these on a c10?
Yes!
no cigarette lighter plug in my benz thanks though!
Is this Jeep a 3.6 or 5.7?
3.6
Holliy s**t really? You guys install this backwards really?
?
This is the worst sounding Jeep I’ve ever heard in my life
Man this was the only way to get a car legally louder than stock here in Germany and now they out right banned the possibility of getting them homoligated. Realy gotta move to the US lol
*laughs in cheesburgers
Trust me that love you're feeling last about an hour then it turns into a dearly sick version of hate deep in the pit of your soul when you hear everybody and their grandma rolling around in a Honda civic with a loud ass muffler or even worse a work truck loaded with carpet or some other shit all loud as fuck with aftermarket exhaust like it's on its way to a track meet... Shits lame and these types here where you have the option to quiet it down should be required and people who have loud ass exhaust should get a ticket if they're doing it between the hours of like 9pm to 9am or some shit
@@drwombat Yeah it's true I'm in Jersey & guys here do this all day long, I mean some are so loud when they pop it literally sounds like gun shots or machine gun fire, now I do like a nice growl but alot of them are just too loud.
The comments are replying to rev boys. Can’t stand them especially the Lambo rev boys (I live in Cali).
in germany too lol, tryna be american af sometimes
Does this change the sound of your exhaust when it’s open compared to before
yes massive difference
Yes, even when closed it is different from the srock exhaust. But not too loud.
When it opens, it roars 🔥
I installed 2 for my 8th Gen accord 2.4
Hey man. Been really interested on putting these on my Mazda 3 2021 2.5 hatchback. Was wondering if you know if it would fit? By the way love the video very professional!
Hey Alex, yes it would fit with a little modification. Order it up!
At the end of the video in the parking garage it sounds like the revs are not near as high of rpms when showing valves closed. Also seemed like the launch on the street wasn't near as aggressive when showing valves closed vs open, hmmmm....
not true! Revs are the same. And you can see the difference in all our other videos with decibel readings on our channel!
“Guys did a fabulous job” *welds look like smile*
How different is the open valve sound compared to as if you were running just straight tubing? Considering getting these but I don't want to lose that raw sound you get with straights.
It’s the exact same as a straight pipe when the valves are open
nothing changes when the valve opens, would be straight pipe still, that's the purpose
Are there less crazy key fobs… I want something plain for my b5 s4
You can use your garage door buttons
I didn't know the install with this easy I thought you had to run it to an existing vacuum line on the car. Can you manually open and close the valves? I may just have the exhaust shop put these on and leave the valves closed until I install this myself. Also can I just hook up this box to my exisiting stereo system in my trunk using the acc wire?
Yes and Yes. If you are mechanically able to hook it up we recommend wiring yourself to save money.
@@valvetronic cool where do you manufacture these systems?
Been spending a lot of time looking at a muffler from yall but at like 600$ usd for one is a bit priceyyy
Sorry man! These are by far not cheap but our quality speaks for itself, there is no compromise
$600 for a muffler? I can get an entire Xforce Varex dual muffler catback for less than a grand and not have to mess with welding.
@@michaelangelo5783does that catback come with a valve? If not, there’s no comparison
I’m sold, I get harassed by my county sheriffs so much over my low sound exhaust.. Ty, great explanation bud!
Gran Cherokee size 3.0 inch /76mm and 2.5 inch /63mm ? what is the size
2.5
@@valvetronic thanks
Alright, I’m putting one on my Roush
"Guy's did a fabulous job" those are some ugly welds. Looks like a teenage practicing welding did it not a shop that charged you for it
How would this affect mpg?
Also would I have to do it myself or could the exhaust shop install the other stuff?
no it doesnt affect it at all. I would let a professional install it
proabably might gain some... due to the reduced weight :)
how would you do the hard wiring ? do you have a video on the hard wiring ?
Very easy, video coming soon
Represent 617!!
Do you ship worldwide? I live in Nigeria, wanna put this on my E90 BMW
Yes we ship worldwide!
Awesome. How do I order?
@@theseductiveman365 here is the link:
valvetronic.com/products/universal-valved-exhaust-kit
Thanks man. Will place the order within the month
Would this make a difference in a v6 2020 Jeep Grand cherokee? I've spent so much money and time doing research and buying different kinds of exhaust systems 5 to he exact
Yes it would make a large difference! We recommend removing the middle mufflers/resonators as well
I’m thinking about buying this, however would it work well with my car? It’s a 2019 Acura TLX A-Spec V6 SH-AWD. I know I’d need 2 mufflers but I have no cigarette/charger connector in my trunk like that jeep does. I guess my question is will I have to do some creative installation to get the tubing and the control box to plug up in my trunk?
2 mufflers, and the plug doesn’t need to be in the teunk
I had the 18 TLX aspec & what I did was a muffler & resonator delete but in the mid I did a 2.5 inch flowmaster super 10 & one guy told me it sounded like a charger, so this is another option
Do you think i can put this on my 3.6 challenger ? & if so how would i go about hardwiring it ?
Have you ever put one on a Range Rover?
Yes please check our other RUclips video
I need this for my v6
Yes you do!
How are they holding up?
No issues, we have designed them to be an uncompromised experience!
Did you purchase prefabbed straight/ X pipes for resonator delete ? If so what brand did you order ? I want my 5.7 GC to sound exactly the same so I want to copy exactly what you have installed
How would this be on a Miata
actually not to bad
Video uploaded on Miata!!
Hello. This fit for lexus is 350 f sport 2023 and if fit what size for my car 🤔 i want to buy but i cant find lexus in store
I'm really trying to figure out how to get a couple fabricated for my 13 tsx. Hmmm
Hello! Curios would this fit on a 2020 vw golf 1.4t? 👀
Yes!
@@valvetronic would I need 2 mufflers or just one for my car?
@@jordangaribaldo2440 just 1
Hey, i had a question, will it fit a infiniti q50? 2017?
Yes!
@@valvetronic Awesome Ty😊
I wonder what it would sound like on a Jeep Wrangler
@Milan Zain wow thats illegal and youre also full of shit.
Hey Shane, it would sound just like this Jeep as it is the same engine
This is also possible to install in Toyota Corolla hatchback hybrid
Wanna hear this on an N54
We have videos!
Wonder how my em2 would sound
Would sound great!!
Is this the 3.6l or 5.7l?
Is that a V6 or v8 jeep
V6
works on both
Hola amigos por casualidad hacen a la medida? Necesito uno para spark gt 2019
would this work on a 2021 r line jetta?
Is that a v6?
I have a single backbox with two pipes on one side. How can I use this and still keep my twin tips?
You will need the exhaust shop to weld a Y pipe or you can use our single to dual tips
What happened if you keep the resonator?
hey would this fit on a 1989 acura integra rs?
Sounds like an infinity
Regarding the vacuum line... It wasn't immediately clear to me where it originated? Did you tap into intake vacuum from the snorkel in front of it TB? or maybe on the other end out by the PCV? Then run it all the way down to the trunk? If not, It almost sounds as if you're pulling vacuum from the trunk which is a total mystery to me.
The system comes with its own vacuum pump to operate the valves
what is the diameter of the outlet? specifically for the 2.5in inlet model
The muffler is 2.5in all the way through, however you can choose your preferred tip style and outlet size at Valvetronic.com
Wow that is seriously cool 💪💪😊 how much is the complete system?
Cuanto pesa cada silenciador?
Somehow just realized you’re part of the company Austin, lol… any previous customers on LS cars or M113k cars?
Need to order 2 kits
What’s up brother! I’ll shoot you an IG message 🤙
About how much would y’all guess it would cost for a professional to install these?
Usually anywhere from $100-300 depending on the shop. These prices vary
My shop said they would do it for about $200 (NJ)
This was a super professional video man 💪
Would this kit work on a e92 n55 ?
yes!
Would i still be able to run a flame map
Yes just make sure the valves are open
Valves are waste of money on a v6 no need for them
They allow you to have no drone
What?!!?!?
@@valvetronic you heard me waste of Money I’ve had 3 v6 jeeps the best bang for buck is mid Muff delete with xpipe and the rear muffler delete straight pipe with quad tips best overall sound and that’s the loudest ur going to get that v6 to sound too all for 650 bucks total
@@cbruno12180 my question is why do you keep buying piece of shit cars & then removing the exhaust? there's no way that doesn't sound like drone hell dude
Wack
do you think this exhaust setup will be just fine with a bit of adjustments to a volvo s60 t5 i’ve been looking at this product for a couple months and was wondering if i should finally buy it
Yes sir! You can make it work!
Hey is this muffler quieter than stock when closed and is the open is straight pipes i wanna shoot flames and still be quiet as well. And is there a valved catalytic converter so I can bypass it when I want
No VALVED cat but yes you can shootnfoames with these mufflers
@@valvetronic thanks for information
@@itzshark6737 Bro, that's a good idea
I wish you guys made this for 3.5” exhaust :(
In production will be coming out soon!
@@valvetronic No way!!! Do you know if it’ll come out before 2022?