Only things I did was trim around airbox 2. make a bracket on the left number plate for the bottom 3. Drill a hole in subframe for the bottom right #plate 4. Had to drill out some of the holes. 5. There was also trimming on rear finder where it hooks to the air box. It DID not fit perfectly by all means but it worked for me but was a pain. Thanks for watching my video! You should check out my other content and like and subscribe to my channel! Hope this was informative for you
I know this is probably a hard question for you to answer but do you think it would be any harder to fit this to the 250 compared to the 450? I have the crf250r and want to do it but I know the frame between the cr250, crf250r and crf450 are all different
@@sparkysgaragemx9869 This is NOT a TX Race kit. The plastics are not black and Red for the Rad Shrouds and the top mounting hole for the rad shroud DOES NOT Fit into the Fuel tank. It needs a plastic wrap around bracket that bolts into the original holes of the tank and then has holes for the bolts for the shrouds further back. Also, the "V" on the side of the plastics where the seat fits into is not as low as this one. THIS kit is for the CR125/ CR250 restyle by Polisport Plastics.
If you are still looking for these plastics I have a set for sale. You can see it on my facebook seller profile. I'm located in SE Michigan but would be willing to ship on your dime. Andrew C.
I ve watched this video more than 100 times, i am gonna be able to make this kit fit like oem? I saw is a space under seat but I think i can reshape the seat to fit perfect but i need anything else to do? Shrouds fit the gas tank? Do you have more videos or photos with this bike?
Only things I did was trim around airbox 2. make a bracket on the left number plate for the bottom 3. Drill a hole in subframe for the bottom right #plate 4. Had to drill out some of the holes. 5. There was also trimming on rear finder where it hooks to the air box. It DID not fit perfectly by all means but it worked for me but was a pain. No I dont unfortunately I sold/traded it for my project cr 125 that I got now. Thanks for watching my video! You should check out my other content and like and subscribe to my channel! Hope this was informative for you!
Sparky's Garage Mx i bought the cr125 seat, subframe, gas tank and airbox but i am working abroad for 2 months:)) in july i will start to put it back together oem fitment:)) how do I find you in Facebook?
@@TheMasterizzatore where it goes around the airbox and no I traded for a 2000 125. That I'm currently working on now. Check out my channel to see the progress!
That came out awesome
Thank you !
I have a 02 n I prefer OEM body with restyle front end
Is this a direct bolt on or you had to add brackets
Had to add bracket and drill out some plastic holes
Mine fits but the gap is annoying you can literally put 3 inch thick plywood through the gap ..
What kit you got
@@Body_Dropped gotta find it .. its on Amazon g
@@mtbridingog9083 well what's the year exactly?
@@Body_Dropped for 2002-2007
Do you have the stock seat? Radiator covers fit good? I am gonna do a similar project to my 2003 crf450r;))
Yes stock seat and yes the rad fit good hard part is the rear number plates
Hi I have the exact same bike and am wondering what u did to it's and how it turned out and also where I got what u need
How can I fit this kit on my 08 crf450r?
Can you do a video of what needed to be done to get the cr restyle kit to fit the crf ?
I'd would but I have sold this bike and no longer have it
@@sparkysgaragemx9869 Ah man bummer, mind briefly going over the mods you did ? Thanks
Only things I did was trim around airbox 2. make a bracket on the left number plate for the bottom 3. Drill a hole in subframe for the bottom right #plate 4. Had to drill out some of the holes. 5. There was also trimming on rear finder where it hooks to the air box. It DID not fit perfectly by all means but it worked for me but was a pain. Thanks for watching my video! You should check out my other content and like and subscribe to my channel! Hope this was informative for you
@@sparkysgaragemx9869 Thanks for the intel! You got a new sub
@@hidros1461 thanks man and your welcome!
I know this is probably a hard question for you to answer but do you think it would be any harder to fit this to the 250 compared to the 450? I have the crf250r and want to do it but I know the frame between the cr250, crf250r and crf450 are all different
It may fit better but look up TXrace.com
@@sparkysgaragemx9869 This is NOT a TX Race kit. The plastics are not black and Red for the Rad Shrouds and the top mounting hole for the rad shroud DOES NOT Fit into the Fuel tank. It needs a plastic wrap around bracket that bolts into the original holes of the tank and then has holes for the bolts for the shrouds further back. Also, the "V" on the side of the plastics where the seat fits into is not as low as this one.
THIS kit is for the CR125/ CR250 restyle by Polisport Plastics.
If you are still looking for these plastics I have a set for sale. You can see it on my facebook seller profile. I'm located in SE Michigan but would be willing to ship on your dime.
Andrew C.
@@Fixin2Ride-Official- yes ik that
@@Fixin2Ride-Official- do you still have will are they for the 450
Olá, onde consigo adquirir comprar esse kit para crf 450 x 2009???
Not sure
Where did you get the kit?! I’ve been looking for hours each day for my 09..... and what year are those supposed to replicate??
Try TXrace.com
I have one of these kits. They are actually for a 02-07 CR125/250 but people are fitting them, like this guy, to CRF bikes.
I ve watched this video more than 100 times, i am gonna be able to make this kit fit like oem? I saw is a space under seat but I think i can reshape the seat to fit perfect but i need anything else to do? Shrouds fit the gas tank? Do you have more videos or photos with this bike?
Only things I did was trim around airbox 2. make a bracket on the left number plate for the bottom 3. Drill a hole in subframe for the bottom right #plate 4. Had to drill out some of the holes. 5. There was also trimming on rear finder where it hooks to the air box. It DID not fit perfectly by all means but it worked for me but was a pain. No I dont unfortunately I sold/traded it for my project cr 125 that I got now. Thanks for watching my video! You should check out my other content and like and subscribe to my channel! Hope this was informative for you!
Sparky's Garage Mx thank you for your response! Already bought the plastics , let’s see how it will turn up:))
How did it turn out?
Sparky's Garage Mx i bought the cr125 seat, subframe, gas tank and airbox but i am working abroad for 2 months:)) in july i will start to put it back together oem fitment:)) how do I find you in Facebook?
Sparky's Garage Mx when you say trim around air box do u mean cutting pieces off air box?
This is a cr 125 04 plastic restyling?
Yes
what holes did u had to drill?
and what you had to trim on the airbox?
Right under the seat and you trim the red plastic piece not the air box it self
The back plastics where the seat bolts
The fender fits normally?
Rear fender i mean
Is this polisport kit?
Yes but with trimming
@@sparkysgaragemx9869 what do u have trimmed? Great crf, do u still have It?
@@TheMasterizzatore where it goes around the airbox and no I traded for a 2000 125. That I'm currently working on now. Check out my channel to see the progress!
@@sparkysgaragemx9869 do you have pics of how you trimmed it?
Is there anything you have to modify ?
@TheKid Glockz just had to drill out some holes in the plastic and make a bracket for the number plate on the left hand side
How many
Make a video of how you did it? :)
Ok I'll have to do that
Appreciate it :)
Fit for crf 250r 2008 ?
Maybe I just winged it and I got it to work
Where did you buy this kit ?
Off ebay its for the cr125/250 but I made it fit for this bike. The holes don't line up the best so I drilled them out a little to fit
I got that same kit
Did you also get a new seat?
No every this is a 04 450. But the plastics
Did you have to drill the front fender at all?
No I did not have to lined up good
If it does where can I buy it
It might fit better it's just the restyle kit for the 02 and up cr 125/250 and I got it off Ebay
Will it fit on a 05?
I dont know. I didnt know if it would fit mine till I bought it trim some stuff and had it mocked up. So it's a hit and miss.
What restyle kit is that?
The 04 cr125/250 theres some drilling and cuting to get it to fit
can someone help me find an complete muffler and exhaust system same buke
Motosport.com
Would it fit an 06
No! Not this one, for 06 search restyle kit tx race, is a bit expensive but is looking damn good!
yeah what he said, im looking in to getting the tx race restyle kit for my 2000 cr125 build
Just look up TX restyle kits.......thank me later
But its not the same style as what I had on the bike. Tx has the years before.
Idle to high
Had it that way for xc racing so it wouldn't stall out so easy
Turn your idle down
Had my choke on
Also your idle is way to high
I ran xc races wanted it high so it would stall out
turn yo idle down
It's turned up for woods racing plus I don't have the bike anymore 🙃
How can I make this fit on my 08 crf450r?
I'm not sure man