Silva Compass Bubble & Bevel Replacement

Поделиться
HTML-код
  • Опубликовано: 2 апр 2019
  • The continuation of gear should be a high priority to extend functionality. Here I demonstrate how I cannibalised an old compass in order to restore a disfunctional, damaged Silva compass.
    Many compasses develop bubbles! Bubbles affect the accuracy and functionality of the instrument. Regular checks are therefore important!
    This is an intricate task.
    #CheckYourPreps
  • ХоббиХобби

Комментарии • 33

  • @filmfolk.
    @filmfolk. 11 месяцев назад

    Thanks for the video, mine wouldn't rotate due to some sticky substance. Managed to take it apart, clean and reassemble thanks to your video. Yes, the wire was tricky, but I laid the compass face down on a table and pushed on the wire with a small screwdriver one section at a time, twisting it with my fingers as needed to angle it in.

    • @PreparednessVeteran
      @PreparednessVeteran  11 месяцев назад +1

      Very fiddly task and not easy, but it's a good little fix. Thanks for the input.

  • @squirrel_bait
    @squirrel_bait 5 лет назад +3

    I've never seen anyone do this before. Had no idea how it was put together. Now I know. Thanks!!!! Unique content online as well.

    • @PreparednessVeteran
      @PreparednessVeteran  5 лет назад

      VERY delicate and FRUSTRATING task. But, a good fix and fusion of old and new... I extended the life of my compasses for another few years...
      Thanks SB.

  • @HuplesCat
    @HuplesCat 5 лет назад +1

    Into my useful ideas playlist because this is really useful. Thanks!

  • @amandagreenley8122
    @amandagreenley8122 Год назад +2

    Spent about an hour trying to do this, then found your video - huge thank you - and tried Rhizome Clinic's tip to use iphone pin thing - got the wire in on the first try. Fab. Thank you.

    • @PreparednessVeteran
      @PreparednessVeteran  Год назад +1

      They're super fiddly. It's not an easy thing to do. Glad to help.

  • @goodloehw
    @goodloehw 3 года назад +3

    Thank you for this video -- I was trying to figure out how to put the wire back in, and it was good to see that it could be done.
    Looking at your video, I thought what you needed was another pair of hands. I had my son put his fingers on certain places as I pushed the wire in with a screwdriver working from one end of the wire to the other until it was mostly set in. Then I went back and pushed the wire all the way in with a small screwdriver.

  • @donpark759
    @donpark759 8 месяцев назад +2

    Good and helpful video. But the removal of a bubble by heating may not be complete BS..... my Silva 4/54 developed a small bubble after a flight, and on advice from an old friend, I hung it in the greenhouse for a day, and the bubble disappeared - "boiled out" basically. But I think using that method to remove a bubble the size of the one shown here might be a bit ambitious! Still, anything is worth trying rather than throwing the compass away. Thanks again for a good video.

    • @PreparednessVeteran
      @PreparednessVeteran  8 месяцев назад

      Absolutely right - Although they're relatively cheap, precision and longevity are helpful.

  • @rhizomeclinic3187
    @rhizomeclinic3187 2 года назад +2

    Brilliant video. I just did mine. My tip is to use the small pin that you get with an apple iphone for removing the sim card, worked like a dream!

    • @PreparednessVeteran
      @PreparednessVeteran  2 года назад

      That's a great tip and good use of alternative materials. Nice! I'll consider that if I have to do this again.
      Many thanks.

  • @sailorboy7024
    @sailorboy7024 4 года назад +2

    I took this one step further. I had a large bubble so I took a number drill and drilled where they sealed the compass. I filled the oil chamber with a syringe and some mineral oil. Once I had all the air removed, I heated up a metal awl and sealed the hole. I was left with just a tiny air bubble 2mm. It took me less than 10 minutes.

    • @PreparednessVeteran
      @PreparednessVeteran  4 года назад

      Great job. It's always good o fix n mend things to extend their use. Wonder how your mineral oil holds up in hot and cold environments?

  • @MadDogSurvival
    @MadDogSurvival 5 лет назад +2

    Nice job brother! Think I commented on this video last time my mate, but just wanted to show you support again 👍🏽👍🏽 Best wishes mukka 😎

    • @PreparednessVeteran
      @PreparednessVeteran  5 лет назад +2

      Yeah, thanks man....... the last of the repetitions.... Only all new stuff from now on.

    • @MadDogSurvival
      @MadDogSurvival 5 лет назад +1

      Nowt wrong with watching your videos again mate you always put great content out! Keep them coming brother! Best wishes 👍🏽👍🏽😎

  • @doughobbs7706
    @doughobbs7706 9 месяцев назад

    Another way is to drain all the fluid out and just be patient that it takes much longer for the needle to settle

  • @popcornlover948
    @popcornlover948 2 года назад +2

    Circlip pliers 🤙

    • @PreparednessVeteran
      @PreparednessVeteran  2 года назад +1

      Most definitely an essential tool for this.
      Many thanks.

    • @popcornlover948
      @popcornlover948 2 года назад +2

      @@PreparednessVeteran No thank you my man it’s a great channel with some great information, you haven’t got the credit you deserve
      I have noticed you haven’t touched on a nuclear event in your vids or have I missed it?

    • @PreparednessVeteran
      @PreparednessVeteran  2 года назад +2

      @@popcornlover948 I covered this in a blog post around 4 years ago, amongst other interesting articles that I may, in the future convert to YT.
      steemit.com/nuclear/@preppervetuk/nuke-immediate-action-drills
      I don not fear monger or sell anything.
      Stay safe, keep training and attaining knowledge.
      Best of luck.

    • @popcornlover948
      @popcornlover948 2 года назад +2

      @@PreparednessVeteran thanks, you should convert it it’ll help the channel grow especially atm but I’ll take a look thank you, I look forward to seeing more :))

  • @harryweiss4669
    @harryweiss4669 8 месяцев назад +1

    Do suunto compasses have the same system with wire?

    • @PreparednessVeteran
      @PreparednessVeteran  8 месяцев назад

      Good question. I've never used a Suunto version, although I should imagine the would work off the same principle.

  • @rawangmp8450
    @rawangmp8450 Год назад +1

    👍👍🏻👍🏼👍🏾👍🏿😇🤓😎
    Thanks

  • @farisroy_
    @farisroy_ Месяц назад

    Hi, is the south needle is always a little bit lower than the north?

  • @MindGarden
    @MindGarden 5 лет назад +1

    Huples sent me

  • @TechnomancerTheWise
    @TechnomancerTheWise 3 года назад +2

    Have you considered a liquid less map compass such as this one? They use a copper ring in the bezel to dampen the movement of the compass needle and as a result will never suffer the fate of a bubble. cammenga.com/product/compasses/destinate-tritium-protractor-compass-d3-t/

    • @PreparednessVeteran
      @PreparednessVeteran  3 года назад

      I always carry two compasses, one as backup. The Silva range are my go-to selection, used them for years.
      Unfortunately, that compass bubble was a crush damage.