I appreciate the video. People don't realize the amount of components needed to run a ship that size. Also amazed at how clean the ship was kept! Thank You for your great service. Tim in Kentucky
Excellent video, yes, but the background music was a bit overpowering. You don't need it, and it took away from the video IMHO. Glad to see that in recent videos, this channel does not have that background music - that is more foreground then it is background. All you need to hear, are the lovely engine room sounds in a video like this. ;)
You, your crew and your ship owners take fine care of the vessel. All those pumps, seals, valves and tanks and no leaks. And no rust at sea. That is pride, competence and hard work. Thanks for the tour.
As an ex-Marine Engineer starting as a cadet and all the way up to 1st Class Certificate and 2nd Engineering Officer before coming ashore; I enjoyed the memories this video brought back. Of all the careers (two lol) I had before retiring, my seagoing one is the one I miss most. The first indication of how well run a vessel is; is the cleanliness; and this engineroom shines!
@@ChiefMAKOi Chief Makoi; I always wondered this while looking at the engine compartments of container ships, and I think I just came to a realization: Are the engine rooms painted all white so that you can see a leak quicker?
I operated and maintained High Pressure Boilers on the USS Anchorage back in the 70's. I wish we had that much room. It's a clean engineering space. Impressive. You said you were on your way to the Bering Sea. You must be headed to Dutch Harbor. I lived there for 5 years working construction. Pile-Drivers and Divers union.
Beautiful engine area. It would take a career to learn what everything is, how it works, what it does and how it effects ship productivity. I can't imagine how to keep it all running. Great job! Truly amazing.
That's amazing, I own a 40 ft 15-ton commercial fishing vessel with a 653 Detriot Diesel, so that's my frame of reference. I understand the mechanical systems but I can't get over their size. That turbo must push an insane volume of air. Thanks for the tour it looks ship-shape.
As an old US Navy Machinist Mate(Hole Snipe) I'm impressed by the cleanliness of your engineering spaces. We spent a lot of time cleaning and painting during off watch hours to keep ours that clean.
We had a large crew in our "M" Division on board. We were on an old 1939 cargo ship that was converted to a repair ship. We had 450 psi super heat steam @ 859* F and a geared turbine set with a single screw. I was a throttle man. So there was a lot of busy work for us. Our engine and boiler room was in the same space. We kept the whole area cleaned and painted as nicely as yours was. I only saw 6 or so men in your control room. Were there more than that? I served on that ship in 1963-1965.
We had 4-5 men on 4 hour on and 8 hour off watches 24/7 at sea. and 2 on watch 24/7 in port. Plus the boiler tenders had 4-6 on watch at sea and 1-2 on watch in port plus an electricians Mate monitoring our main electrical board. As a repair ship we had two boilers, and three steam turbo generators that were 1000 volt D.C. and 1300 amps each, and at least one was lit off in port 24/7. All three were lit off at sea. We had 2 triple effect distillation units in a separate compartment with two men on watch and we could make 72,000 gallons of potable or boiler water every 24 hours. Our flank speed was 23 knots. Our best speed with regard to fuel consumption was 15 knots . There were also other electrical generators in other compartments for A.C. power. We had repair shops to repair almost anything that didn't require dry docking, plus an optical lab, and a dentist and Medical Doctor. on board with a 10 bed hospital. I believe there were 350-500 men on board at any time....the engineer spaces weren't Air conditioned and in August of 1964 in the South China sea, the ambient temperature on deck was 110* F. In the engine room the temperature was 120 to 140 degrees "F" My pay rate was $120 per/Month. It was one of the best times of my life as a 19 year old kid.
Thank you. It's very nice to see a chief engineer of a cargo ship talk us through the marvel of machines you keep running. Nearly all we buy at some point had to voyage the seas.
Best video of this type I have seen. As a retired engineer it gave me an insight as to how things have progressed since I left. Nice voice over the cacophony of the engine room sounds. You keep the piece of equipment in shot just long enough. Well done.
Tidy... I used to be a Chief on Semi Submersible Drilling Rigs and we had no requirement for a huge main Engine but all the Auxiliary Engines and equipment I saw here reminded me of my days offshore, it was always enjoyable and interesting. The routine is something that kept you going, and the inevitable maintenance, trouble shooting and repairs made the days fly by. Nice Video.
Impressively clean ER! Interesting to see an ER of a two-stroke! I only worked with a four-stroke, where the whole ER is much more compact. Thanks for the video. Keep up the excellent work, Chief!
Thanks for taking the time and effort to produce and publish your videos. For me, this is one of the most interesting channels to watch. Congratulations on running such a tight ship.
Awesome tour Chief. Outstanding cleanleness and neatness. You should be proud of your department. The painting makes the area very clean looking. Be safe and thanks for sharing
extremely interesting - my career experience in transportation was airplanes and Big trucks but I always had a longing for the seafaring life. GREAT channel, keep'm comming.
Please tell me that there are some things in there that you would just say “I have no idea what that does!” I can’t imagine knowing all of that! Major props!
Thanks for a great video. I am not a real seaman but have fiddled with all kind of engines for decades and am a son of an old engineer who sailed in the sixties. So of course i grew up on a lot of interesting stories, and has also done some computer-related work on a few ships. The most fun were always when work had to be done in the engine room. Thanks again from the west coast of Sweden. I can´t get enough of videos like this. :)
this is amazing video i did subscribe to your channel im new to it i'd love to see a oil change on this beast please keep up the amazing videos thank you so much
Now i know what engine room looks like. 😊 my boyfriend used to watch your videos Sir. He is currently on his apprenticeship traveling from Iran to China. Pinoy din po. Gusto niya rin maging Chief Engr kagaya po ninyo 😊 very helpful po mga videos niyo lalong lalo na sa mga nag uumpisa din 😊
Ayye Chief !! This was by far the best video in the channel, although I met It 2 days ago 😁. I am a Brazilian 3rd Engineer, and I've been struggling to get my first contract here, more exactly, since 2016 😔. This video reminded me of how beautiful the profession is, and so I won't give up! See ya.
Monitoring parameters-have to do this at the VOA transmitter plant. Always have had a fascination for ship engines,RR engines,gas turbines and aircraft besides the large transmitters I use.
I would like to pursue this kind of job because it is too stunning and helps a lot our daily life gaining experience day by day .Thanks for this video .It was fantastic and enticed me .
thanks chief for your videos, it's a big help and guide to those cadets special me, I'm one of subscriber that never have an experience on board, more power chief good blessed, and continue your good work,
Sana maexperience ko din ganyan ka laki na machinery spaces.. Hirap makasampa pag wla backer.. 😅Lalo na pag di qualified sea service... Tanx xa video sir mackoy.. 😍
nice vlog,,,ingat guys//// kwento lng chief MAKOI i remember we sailing coast of Turkey when1 of our wifer died when he fell from top of the engine to d floring...kwawa nga dahil ikakasal n sana RIP crewmates,,d TURKEY coastguard try to save his life ,but he died on a helicopter,
Hi Chief, Please let me ask a noob question. I am not a marine engineer, just a machinery enthusiast with some knowledge from the Neptune ER simulator :) The ship is at sea speed, so the beefy SW, LTFW and main LO pumps are running on top of the rest of ME aux machinery and general baseline loads. Meanwhile a single DG is covering all that at third of its full capacity and I did not see shaft generator. I was thinking cargo ships need at least 2 gensets running when the ME is ready or is running. Maybe bulk carriers have smaller SW and LTFW pumps than the VLCC simulated in the Neptune? Anyway, I highly appreciate your vids, its so satisfying to see real machinery and highly skilled marine engineers keeping them running.
Excellent video, great engine room - you could eat your dinner off the floor!! Its so much easier to spot a leak in a clean environment and much less of a fire risk too. It always seems strange how the crew change ships frequently - it must be like relearning your job on every new ship?
Very interesting, I have never been on a ship.If possible explain thr oil purification systems, Is the quality of the oil not up to specs? Compared to a car engine , with constant cooling from the ocean,, why is so much lubrication needed?
Very Clean Engine Room. How old is your ship ? Is the Boiler Water Tube type ? Is it used to generate steam for the Auxiliary Equipment and Generators while docked and if there is no shore power ?
The operating manuals for the machinery you are in charge of must be thousands of pages, many books? If something breaks at sea are you in charge of fixing it? On an older ship I would guess with so many things to break you would always be fixing something? Thanks.
GREAT video! How loud is it in engine room? I do a lot of ship watching on the St Lawrence river in New York State.. Ya can hear the pounding of the engines from a mile away😊
Very nice and clean engine room! By the way, does it has only one shaft (propeller)? What if the main engine shutdown in the middle of the sea? Would you have any other alternative?
Great video. Can you make a video of the "business" of a ship: * Cost of a new ship * Cost of yearly maintenance * How long does the ship last for (service life) * When do they know to scrap it, scrap out costs, procedures * How does it get sent for ship breaking in Bangladesh, etc. Thx.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Congratulations for keeping the engine room so clean and tidy.
I appreciate the video. People don't realize the amount of components needed to run a ship that size. Also amazed at how clean the ship was kept! Thank You for your great service. Tim in Kentucky
Thanks Tim!
@@ChiefMAKOi Tim in Florida loves your channel too! I've been binge watching all weekend ;-)
Excellent video, yes, but the background music was a bit overpowering. You don't need it, and it took away from the video IMHO. Glad to see that in recent videos, this channel does not have that background music - that is more foreground then it is background. All you need to hear, are the lovely engine room sounds in a video like this. ;)
You, your crew and your ship owners take fine care of the vessel. All those pumps, seals, valves and tanks and no leaks. And no rust at sea. That is pride, competence and hard work. Thanks for the tour.
As an ex-Marine Engineer starting as a cadet and all the way up to 1st Class Certificate and 2nd Engineering Officer before coming ashore; I enjoyed the memories this video brought back. Of all the careers (two lol) I had before retiring, my seagoing one is the one I miss most. The first indication of how well run a vessel is; is the cleanliness; and this engineroom shines!
Thanks! I have more videos like this in my channel. I hope you enjoy!
@@ChiefMAKOi
Chief Makoi;
I always wondered this while looking at the engine compartments of container ships, and I think I just came to a realization:
Are the engine rooms painted all white so that you can see a leak quicker?
I operated and maintained High Pressure Boilers on the USS Anchorage back in the 70's. I wish we had that much room. It's a clean engineering space. Impressive. You said you were on your way to the Bering Sea. You must be headed to Dutch Harbor. I lived there for 5 years working construction. Pile-Drivers and Divers union.
Your engine room is an object of beauty! So clean,tools put away-well kept.
Beautiful engine area. It would take a career to learn what everything is, how it works, what it does and how it effects ship productivity. I can't imagine how to keep it all running. Great job! Truly amazing.
Watching this video alone shows just how tight of a ship, but also friendly atmosphere. This is the type of team that goes places.
That's amazing, I own a 40 ft 15-ton commercial fishing vessel with a 653 Detriot Diesel, so that's my frame of reference. I understand the mechanical systems but I can't get over their size. That turbo must push an insane volume of air. Thanks for the tour it looks ship-shape.
Chief you do a great job of EXPLAINING. It's got to take YEARS to know what you do ! Love your videos.
As an old US Navy Machinist Mate(Hole Snipe) I'm impressed by the cleanliness of your engineering spaces. We spent a lot of time cleaning and painting during off watch hours to keep ours that clean.
Thanks! A simple rule we follow is to clean the workplace up immediately after jobs. We could save a lot of cleaning hours in the long run that way.
We had a large crew in our "M" Division on board. We were on an old 1939 cargo ship that was converted to a repair ship. We had 450 psi super heat steam @ 859* F and a geared turbine set with a single screw. I was a throttle man. So there was a lot of busy work for us. Our engine and boiler room was in the same space. We kept the whole area cleaned and painted as nicely as yours was. I only saw 6 or so men in your control room. Were there more than that? I served on that ship in 1963-1965.
The whole engine team is composed of 4 engineers, 2 motormen, 1 wiper and 1 cadet. 😁
We had 4-5 men on 4 hour on and 8 hour off watches 24/7 at sea. and 2 on watch 24/7 in port. Plus the boiler tenders had 4-6 on watch at sea and 1-2 on watch in port plus an electricians Mate monitoring our main electrical board. As a repair ship we had two boilers, and three steam turbo generators that were 1000 volt D.C. and 1300 amps each, and at least one was lit off in port 24/7. All three were lit off at sea. We had 2 triple effect distillation units in a separate compartment with two men on watch and we could make 72,000 gallons of potable or boiler water every 24 hours. Our flank speed was 23 knots. Our best speed with regard to fuel consumption was 15 knots . There were also other electrical generators in other compartments for A.C. power. We had repair shops to repair almost anything that didn't require dry docking, plus an optical lab, and a dentist and Medical Doctor. on board with a 10 bed hospital. I believe there were 350-500 men on board at any time....the engineer spaces weren't Air conditioned and in August of 1964 in the South China sea, the ambient temperature on deck was 110* F. In the engine room the temperature was 120 to 140 degrees "F" My pay rate was $120 per/Month. It was one of the best times of my life as a 19 year old kid.
Nice clean and well maintained engine room... chief you can be proud of your team of mechanics 👍
That is a lot of equipment to be responsible for. Thumbs up to you and all your crew.
Thank you. It's very nice to see a chief engineer of a cargo ship talk us through the marvel of machines you keep running. Nearly all we buy at some point had to voyage the seas.
Amazing engine room, clean and tidy.
Steady safe chief !!!.
Greetings Chief, what a pleasure to do the rounds with you!
The spaces are a reflection of you and the team's professionalism and dedication!
You are very Good chief engineer sir
They are lucky who works with you
Best video of this type I have seen. As a retired engineer it gave me an insight as to how things have progressed since I left. Nice voice over the cacophony of the engine room sounds. You keep the piece of equipment in shot just long enough. Well done.
Thanks! I really appreciate it.
Tidy... I used to be a Chief on Semi Submersible Drilling Rigs and we had no requirement for a huge main Engine but all the Auxiliary Engines and equipment I saw here reminded me of my days offshore, it was always enjoyable and interesting. The routine is something that kept you going, and the inevitable maintenance, trouble shooting and repairs made the days fly by. Nice Video.
Impressively clean ER! Interesting to see an ER of a two-stroke! I only worked with a four-stroke, where the whole ER is much more compact. Thanks for the video. Keep up the excellent work, Chief!
Amazed at how clean and organized it is
Makoi you are worth every cent they pay you, the systems are wide and complex
Thanks for sharing. It gives some perspective to the sheer immensity and scale of the machinery you work on every day.
Spotless! Outstanding!
What's up! I've come back here for more! It's elegant! Magnificient. Nice patching. Good luck
Immaculate spaces, denotes excellent maintenance practices, very impressive and informative. Great video, as usual. Thanks Chief..
When everything in the engine room is running well, happy ship´s crew and happier ship´s captain...
Thanks for taking the time and effort to produce and publish your videos. For me, this is one of the most interesting channels to watch. Congratulations on running such a tight ship.
Congratulations! Engine room clean !
Very nice and clean , please post more videos while overhauling machineries
Awesome tour Chief. Outstanding cleanleness and neatness. You should be proud of your department. The painting makes the area very clean looking. Be safe and thanks for sharing
extremely interesting - my career experience in transportation was airplanes and Big trucks but I always had a longing for the seafaring life. GREAT channel, keep'm comming.
Instead of music would love to listen to these magnificent engines,motors and equipment working! Love the sounds of equipment!
Wow, that is a really complicated engine room. Thanks for showing us around!
G'day Chief, that is a very well run ship. A create to you and the Crew.
You could eat off those floors. I bet you and the crew are proud of that ship.
I salute you chief.. Thanks for the vlog
Please tell me that there are some things in there that you would just say “I have no idea what that does!” I can’t imagine knowing all of that! Major props!
Engine room is so clean and tidy.. well maintained 💯🤩 thank you chief for providing us very useful information
Nicely kept engineroom, Chief! A dose of nostalgia for me - recognised everything even though I left the sea in 86...
Thanks! It's very important to keep things in shape with Port State Control being strict in enforcing rules nowadays.
Picture perfectly clean engine room! Thanks for excellent tour!
Thanks for a great video. I am not a real seaman but have fiddled with all kind of engines for decades and am a son of an old engineer who sailed in the sixties. So of course i grew up on a lot of interesting stories, and has also done some computer-related work on a few ships. The most fun were always when work had to be done in the engine room. Thanks again from the west coast of Sweden. I can´t get enough of videos like this. :)
Thanks! I'm glad you liked it.
Chief MAKOi hello sir how job scope nowadays in this shipping field especially engine side
Chief MAKOi pls reply ASAP
The owners of that ship should be grateful to you and the crew for keeping that ship in a high condition of State.
Excellent tour Cheif. Nothing like it. Thank you 😎👍
this is amazing video i did subscribe to your channel im new to it i'd love to see a oil change on this beast please keep up the amazing videos thank you so much
It brings back memories. I miss it.
Very good explaining sir you are number 1 chief engineer thank you and god bless you ❤️
Now i know what engine room looks like. 😊 my boyfriend used to watch your videos Sir. He is currently on his apprenticeship traveling from Iran to China. Pinoy din po. Gusto niya rin maging Chief Engr kagaya po ninyo 😊 very helpful po mga videos niyo lalong lalo na sa mga nag uumpisa din 😊
Thanks for watching!
Please stay Loyal while your BF is at sea.
😎
Ayye Chief !!
This was by far the best video in the channel, although I met It 2 days ago 😁.
I am a Brazilian 3rd Engineer, and I've been struggling to get my first contract here, more exactly, since 2016 😔.
This video reminded me of how beautiful the profession is, and so I won't give up!
See ya.
Israel F, hang in there. It will happen.
clean, very very clean. my first ever comment on youtube...and been watching for years
Thanks James!
Chief very nice E/R well maintained
Love this video Chief
Thank you so much for the Engine Room video.
Thanks again.
Cool tour! Thank you 👍
Thank you so much for showing the engine room. Everything is so clean pristine how do you keep everything so clean must take a lot of work
Very helpful video for students thank you! More power and bon voyage!
Monitoring parameters-have to do this at the VOA transmitter plant. Always have had a fascination for ship engines,RR engines,gas turbines and aircraft besides the large transmitters I use.
@lmost all ship engine rooms are so clean you could eat off of them ! Guess crew has to be on the ball !
So complicated to make propellers turn and ship go! Wow! 😃
Thanks a lot sir. I learn whats look like boiler .. because on my last ship in inter island we have no boiler ...
The nicest quietest ER I ever worked in was a Westinghouse turbo-electric T2 tanker built in 1946.
So cool to see this Thanks I’d never know with out this video. Appreciate that .
I would like to pursue this kind of job because it is too stunning and helps a lot our daily life gaining experience day by day .Thanks for this video .It was fantastic and enticed me .
Thanks for watching!
As an inspired Engine Cadet Sir thank you so much may natutunan ako sa mga videos mo 😊 God Bless Sir
thank u sir giving good knowledge to freshers
Engine room is serious business!
thanks chief for your videos, it's a big help and guide to those cadets special me, I'm one of subscriber that never have an experience on board, more power chief good blessed, and continue your good work,
Ur ship is clean ✌️☺️
Sana maexperience ko din ganyan ka laki na machinery spaces.. Hirap makasampa pag wla backer.. 😅Lalo na pag di qualified sea service...
Tanx xa video sir mackoy.. 😍
nice vlog,,,ingat guys//// kwento lng chief MAKOI i remember we sailing coast of Turkey when1 of our wifer died when he fell from top of the engine to d floring...kwawa nga dahil ikakasal n sana RIP crewmates,,d TURKEY coastguard try to save his life ,but he died on a helicopter,
Awesome video 👍👍
thanks for this video
lupit mo sir hepe na seaman vlogger pahhh salute
great job!
amazingly impressive
Hi Chief,
Please let me ask a noob question. I am not a marine engineer, just a machinery enthusiast with some knowledge from the Neptune ER simulator :) The ship is at sea speed, so the beefy SW, LTFW and main LO pumps are running on top of the rest of ME aux machinery and general baseline loads. Meanwhile a single DG is covering all that at third of its full capacity and I did not see shaft generator.
I was thinking cargo ships need at least 2 gensets running when the ME is ready or is running. Maybe bulk carriers have smaller SW and LTFW pumps than the VLCC simulated in the Neptune?
Anyway, I highly appreciate your vids, its so satisfying to see real machinery and highly skilled marine engineers keeping them running.
Very good chief...i wish someday i can get work on board as a machine fitter.
Excellent video, great engine room - you could eat your dinner off the floor!! Its so much easier to spot a leak in a clean environment and much less of a fire risk too. It always seems strange how the crew change ships frequently - it must be like relearning your job on every new ship?
You know that somewhere in the world, there is an eighteen year old right now thinking "how can I get that TURBO fitted on my mini"
ah, you're following Project Binky, I see
Very interesting, I have never been on a ship.If possible explain thr oil purification systems,
Is the quality of the oil not up to specs? Compared to a car engine , with constant cooling from the ocean,, why is so much lubrication needed?
Good stuff! Time for the big fella to have a feed after doing his rounds ay! :)
Great tour! Regards from one seaman💪💪
Hi. Don't know if you have already done a video on crew accommodation but if not it would be nice to see this on a ship of this size 👍
U should take a thermometer with you. I'm curious how how/cold it gets where u work in whatever seas
Nice video, this helps me a lot, thank you...
My Maritime English professor used this video in one of his classes! :)
Think you sir may mga totohan ako sa mga vlag mo abou part ng barko..😊
Pangarap ko talaga to. Kaya lang di pa pinalad ngayun na makasampa abroad
Your engine room looks exactly like my previous vessel sir, MV Ultra B-------, all positions of machineries are exactly the same
chief gawa ka nang video pra sa isang job interview para sa aming mga kadete.. Thanks.
Unbelievable!! I'm flabbergasted!! It's HUUUGE!!! How do you keep it all so clean? Is the air filtered to keep out the dirt and dust?
Simly amazing.
Very Clean Engine Room. How old is your ship ? Is the Boiler Water Tube type ? Is it used to generate steam for the Auxiliary Equipment and Generators while docked and if there is no shore power ?
Great vid thanks
The operating manuals for the machinery you are in charge of must be thousands of pages, many books? If something breaks at sea are you in charge of fixing it? On an older ship I would guess with so many things to break you would always be fixing something? Thanks.
GREAT video! How loud is it in engine room? I do a lot of ship watching on the St Lawrence river in New York State.. Ya can hear the pounding of the engines from a mile away😊
hello i am an oiler hopping to sail with a ship that big. thanks for the video
Bulk one of easy type of vessel:) nice profil on YT:)
Very nice and clean engine room! By the way, does it has only one shaft (propeller)? What if the main engine shutdown in the middle of the sea? Would you have any other alternative?
Great video. Can you make a video of the "business" of a ship: * Cost of a new ship * Cost of yearly maintenance * How long does the ship last for (service life) * When do they know to scrap it, scrap out costs, procedures * How does it get sent for ship breaking in Bangladesh, etc. Thx.
Thanks for the idea!