Great! I'm really glad you pointed out the stud vs drywall anchor install methods. I didn't even think about that when I was shooting the video. It was just what I had to do to make it work! Ha ha!
@@TheRenderQ I needed this. These 24 inch bars I got for the bathroom had the same problem. The left had a stud in the wall, the right side does not, and I saw my mistake in using the plain anchor in the right and it’s loose, but the left is tight, but the right is not. Now I got this hole. I’m putting this in my Pinterest.
This little ruclips.net/user/postUgkxVoi3B4CB6Oygq1-vo4OTL1M_M5JkrXif tub works perfect in our 6 x 6 shower and is easy to get in and out. Also easy to drain.
Thank you so much for your help. It has been broken for quite a while. That little screw under there got me. Very clear and probably very fewest of the videos who accurately describe and answers to the point.
Great video, thanks for making such useful and straightforward content! My six year old ripped the towel bar off the wall so I'm working on getting it back on, but at a height that is better for him and his brother.
Thank you soooooo much for this. I moved into a new house and the towel hanger fell off. I tried to force it on, but after watching the video, I realised what exactly to do... Bro, youtube can teach you anything these days
Nice! I'm really glad you appreciate the details I put into my videos. I want my viewers to be able to see and hear what I'm trying to show clearly. Thanks for watching!
I live in an apartment. My towel racks constantly fall off the wall & door. I have to be so careful hanging my towels light. Anyway, I ended up having to patch a huge hole in the wall & to rehang the bar holder there were no instructions as to which way that silver thing was to face. I took a guess! The “back side” lies flush to the wall! I was afraid to unscrew it & ruin the hole & have to start over again if I had it facing the wrong way! My problem is, IT STILL FALLS OFF!! Anyway, this was very helpful. (But I could definitely NOT need to see a Buddah!!)
Thank you! Mine has been falling off regularly for years and this time I just couldn't get it to stay on the wall. Never knew the little prongs were on screws! DONE!
Excellent! I’ve had my fair share of loose towel bars. Those wall anchors really help when the screw hole no longer holds the screws in! Glad you’ve got a secure towel bar now!
Thank you for detailing and explaining. I have been trying to learn how to do little things around my house. This is the best video. Please do more easy household tasks. Carol Montalto
Careful on the plastic toggle anchors. Both anchors on each bracket must be installed so the "wings" of the toggle are horizontal as you push them through the drywall, otherwise when you set the anchor with the red pin the toggles could "touch" each other preventing them from sitting tight against the wall.
@zander esp I usually put the first bracket in the wall first then I make sure the second bracket is level with the first. Place the level on top of both brackets and "rest" it on both brackets as you hold the bracket in place with your hand. Then you can mark your holes on the second bracket. Many ways to do it just my preferred method
Great video! Learnt fr yr video how to reinstall my bar towel after it came off. Didnt realise there is a screw at side of the round knob till i watched yr video. In less than 10.min, ta‐da ! Done! Thank you!
One more thing.. sometimes ..some bars have brackets a bit lesser in size(in thickness). U fix them on wall with screws .but when u try to tighten the set screws .u will found out they r unbelievable tight right from the start. In reality the set screws pushing the bracket attached to the wall .nit holding them. Make sure to check that first if u r a newbie.
Thank you sir Just bought my first home and i need to install this i wasnt sure how but this is helpful thank you 😅 Are ypu able to do a door lock tutorial Theres a lock i want to install on the door and metal frame of the door Not sure how to drill the metal frame and put a screw in
This is def going to help me install mine. The measuring from the floor seems like a good idea, as I’m not sure that the window and stuff around are level… who ever build or did a previous remodel on this place before me did some shotty work, that I’m slowly repairing as money allows.
The screws on the bottom are not screwing into my anchor. When I’m trying to screw them into the anchor it’s like they are just pushing the towel rack off the anchor as I try to screw them in. Nothing is working, they are not easily screwing in like your video. Absolutely maddening I’m literally about to punch a hole in the wall instead.
😍Such a useful well made video. thank you so much, I'm going to do this over the weekend myself! so sick of waiting for guys to help me. 😅master bath here l come!
I've already gotten this far and am looking for help because my anchors are spinning and after finaggling with pliers and a screw driver I got the screws flush to the bracket but not tight at all. My holes for the anchors are a little big now too.
I had a towel bar in a bathroom where the hole in the drywall got too big for plastic anchors. To fix it we used the metal folding type. They’re spring loaded so they fold to the size of the hole. Then flip open once behind the wall. Basically put the screw partly into the folding anchor, slip it into the wall and tighten. This will provide a super strong grip. Of course they come in different sizes too. Hope this helps!
Haha! Hopefully you can get your wall patched up! But you’re probably going you have to use some good wall anchors when installing your towel bar! Thanks for watching!
I'm only a weekend handyman so I'm not exactly sure about how to know where the electrical wiring is located in the wall. On the wall in the video I know there are no electrical wires there. But if I'm correct, most electrical wiring in the walls will be secured to the wood studs. The only ones that aren't will be the ones going across the studs. I've installed a towel ring right above a light switch and electrical outlet in one of my other bathrooms and didn't run into an issue. However, you might ask a friend or co-worker for some additional advice before continuing if you're worried about the wiring in your wall.
Yes! It will definitely leave a hole in the wall when you remove the wall anchors. The hole will become slightly bigger when you pull them out. You’ll need some pliers to grab them and twist to get them out. Of course without the screw in it. Hope this helps!
Been trying to rehang mine the past 6 years..still no luck. Th3 holes are just too big and the anchors just keep making larger and larger holes in the drywall. And the screws just either push through the drywall or just hang floppily. I can now nearly stick my entire pinky into the holes.
A handyman just installed our beautiful new towel bar and medicine cabinet, but both are uneven by about 1/16"!! He used a laser on the wall to measure (rather than a tape measure), and we are so bummed. The wall was freshly painted ... do you think 1/16" is enough to have him come back and redo it?
I know if the towel bar was uneven it would bother me every time I look at it. So if you feel the same way then maybe have him come back. His laser level is probably more accurate than a tape measure. However as I do DIY projects around the home I find that some walls/windows aren’t exactly level which could be why the towel bar is slightly off. Sometimes it depends on the reference point used for leveling. He may be able to adjust it without too much trouble. Hope this helps!
I like everything about the video, it just makes me cringe when you move the drill around while drilling the hole. Why not just choose a slightly larger drill bit? By moving the drill around in a circular motion, you are less “in-control” of the size of the hole you are making, and going to remove more drywall on the internal aspect of drywall, (The place where you actually want the drywall to be the strongest (around the anchor). Just push the drill in, with as little wobble as possible, then withdrawal. That’s the way the drill was designed to be used. Otherwise, like I said, good video. ) ...Plus, I would’ve checked for studs FIRST. You ideally want the screw to be located in the CENTER of a stud. By finding stud first, you could adjust the position of the towel rod slightly so that the right side is more-likely to hit the CENTER of the stud.
Hey thanks for the feedback! You're right about choosing the correct size drill bit! I thought I had the proper size but when I realized I didn't my first instinct is to rotate the bit around to enlarge the hole. I know it's not good practice to do it that way. Regarding studs, I did check for studs. On the first towel bar there is no stud on the left but there is a stud on the right (see it at 2:11). With the length of the towel bar, I could only mount it with the stud on one side. But I'm really glad you enjoyed the video overall! Thanks for watching!
I'm currently looking for a new towel bar but the old bracket was installed side by side but I can't find any good ones like the bell shape that are the same. Am I looking in the wrong places?
I installalled a 3 towel rack as in the video. After a coupld of weeks, the rack started to come out even with anchors. What did we do wrong? Could you help please?
I just used the plastic ones from the home improvement store. Just make sure it fits the size of screw you are using. I don't know the exact size of the ones I used off the top of my head but I currently have two sizes in my cabinet just in case for various projects. There are also metal anchors that flip out after you insert them into the wall. Those are probably more secure than the plastic ones. The metal flip out ones are useful if the hole in the drywall gets too big for an anchor. An employee at the store could probably help you with the correct size. Hope this helps!
In my demonstration in the video yes I did drill a bigger hole for the wall anchor. I simply compare the size of the screw or wall anchor to the size of the drill bit. I always choose one slightly smaller than the screw or anchor. Hope this helps!
Oh nice! That's a long time but as you can see it's pretty simple to do. Just don't drill the hole too big. You could find a scrap piece of drywall and do some practice on it to get more confidence on doing it!
Yeah let me know if you have other projects. It might give me ideas on new videos. I was planning on creating a whole new channel one of these days just for home improvement/repairs because this channel is mainly for tech reviews. I welcome your ideas!
I don’t think you need a lot of power to screw in screws with a power drill. I have mine on a lower speed setting. And this is an old drill from Eagle Hardware from many years ago... if you remember that store before it became Lowe’s.
There are different types of wall anchors. I’ve been thinking of making a video to solve the problem you just described. But in the meantime you can use the wing-type wall anchors made out of metal. They have a spring that holds them open when they’re behind the wall. First put a screw through it and towel bar wall bracket. Then squeeze the spring loaded anchor and slip it into the hole in the wall. This will provide an ultra secure hold. You can find these at your local hardware store. I have these in one of my bathrooms. My towel bar isn’t going anywhere! Hope this helps!
I haven’t had to work with metal studs before so I’m not sure how much I can help. However you’ll probably need a drill bit made for metal. The procedure is most like the part where I put a screw into the wooden stud. Just don’t drill the hole too big!
Sorry I don’t know the drill bit size. Usually I just hold the bit up to the screw and pick a bit that is just barely smaller than the screw threads. Hope this helps and thanks for watching!
When buying a replacement bar, do you measure from screw to screw to find out the size? Because my current bar is 18.5" from screw to screw, so I am not sure if I should buy 18" ?
Yes you could measure screw to screw to get an approximate size. But each towel bar might be slightly different in length so the original holes won’t necessarily work. But to get the length you could measure the bar itself but that also varies with each bar. I think approximate length will be good enough. Hope this helps!
@@TheRenderQ thank you. I am trying to avoid drilling any new holes. Nothing wrong with current bar just trying to update to matte black and now thinking that maybe just painting it black instead.
Thanks for your question! Yeah I was assuming the studs are wooden. At least in all the homes I’ve lived in. Maybe if you’re in a commercial building like an apartment or condo you would probably have metal studs. I don’t have any experience drilling into metal studs so I can’t really help you there. You’d need a drill bit made for metal plus I don’t know how thick the outside layer of the metal stud would be. But it’s possible to drill into them since the metal studs are hollow. But again I don’t have experience with them. If you’re unsure then I’d recommend using wall anchors for the installation. Hopefully where you need to put the anchors still allows you to place the towel bar where you want it.
Yeah I’ve seen those anchors come out of the wall. Depends on how rough people are when yanking the towel off the bar. It also depends on whether the proper size hole is drilled. These towel bars are still holding very strong on my wall since I installed them. I’ve used these plastic anchors on other towel bars and towel rings around my house with no problem. Thanks for watching!
I'm really glad to hear that you found the video helpful! I often pick up my camera and make a video while I'm making my home repairs but it takes me 3 times as long to finish the project! Ha ha!
When I select a drill bit, I'll hold up the screw or drywall anchor, then select a drill bit that is just slightly smaller than the diameter of the screw or drywall anchor. Hold the bit up against the screw so you can see the diameter of the screw and drill bit. I hope this answers your question!
Yes! You know what? This towel bar actually had the template printed on the inside of the box. I didn't know it was there until I was done with the installation and in the process of flattening the box to recycle it!
Thanks for the feedback! You're probably right about the plastic anchors. However that's what is included in pretty much all products that need mounted to walls. Definitely the best are the metal spring-loaded anchors. But I think the type that was included with the towel bars I installed will last for quite a while.
That's what I thought, too - the problem arises when angular forces are applied, such as someone pulling the towels off the bar sort of to the side, or essentially, in a direction that doesn't align with the weight-bearing design. You're right about the metal anchors!
I don't think you need a lot of volts for the drill. Any basic drill will work. Buy an affordable one. My drill is more than 15 years old and it still works. I didn't pay any attention to the specs of the drill when I bought it. I had to repair the cord once but it's the one I used in this video. Hope this helps!
Way to drill the heck out of that drywall 3-4 inches in a circular motion and hammer the poop out of those anchors!! You could use some hair on those set screws!
Great video, especially liked that you had one end on a stud and the other on plain drywall, so we saw both types.
Great! I'm really glad you pointed out the stud vs drywall anchor install methods. I didn't even think about that when I was shooting the video. It was just what I had to do to make it work! Ha ha!
@@TheRenderQ Iiiiiiiii
We sell this tower holder on Amazon.Do you want a free sample.pls contact me 😌
@@TheRenderQ I needed this. These 24 inch bars I got for the bathroom had the same problem. The left had a stud in the wall, the right side does not, and I saw my mistake in using the plain anchor in the right and it’s loose, but the left is tight, but the right is not. Now I got this hole. I’m putting this in my Pinterest.
I thought it's prefered to install the on either side of studs. Instead of right on them
Thanks man, my towel hanger fell off and I didn't know where to start. This vid def. helped!
Excellent! I’m glad my video helped you get your towel bar reattached! Thanks for watching!
Just installed my first towel bar with the help of this video. Thanks 😊 💯
You’re welcome! Excellent work! I’m really glad my video helped with your towel bar installation! Thanks for watching!
This little ruclips.net/user/postUgkxVoi3B4CB6Oygq1-vo4OTL1M_M5JkrXif tub works perfect in our 6 x 6 shower and is easy to get in and out. Also easy to drain.
Excellent! Glad my towel bar video was helpful!
Thank you so much for your help. It has been broken for quite a while. That little screw under there got me. Very clear and probably very fewest of the videos who accurately describe and answers to the point.
Excellent video. You stayed on track and it was very clear and simple and helpful. I can do that!
Great video, thanks for making such useful and straightforward content!
My six year old ripped the towel bar off the wall so I'm working on getting it back on, but at a height that is better for him and his brother.
Thank you soooooo much for this. I moved into a new house and the towel hanger fell off. I tried to force it on, but after watching the video, I realised what exactly to do... Bro, youtube can teach you anything these days
My son just pulled the towel bar In his bathroom. This video was very helpful
I’m really glad my towel bar video was helpful! Thanks for watching!
I very much appreciate the excellent audio quality of your video!
Nice! I'm really glad you appreciate the details I put into my videos. I want my viewers to be able to see and hear what I'm trying to show clearly. Thanks for watching!
I live in an apartment. My towel racks constantly fall off the wall & door. I have to be so careful hanging my towels light.
Anyway, I ended up having to patch a huge hole in the wall & to rehang the bar holder there were no instructions as to which way that silver thing was to face. I took a guess! The “back side” lies flush to the wall! I was afraid to unscrew it & ruin the hole & have to start over again if I had it facing the wrong way! My problem is, IT STILL FALLS OFF!!
Anyway, this was very helpful. (But I could definitely NOT need to see a Buddah!!)
This worked, thank you! Good to know you can teach an old dog new tricks.
I actually loathe hanging towel bars . I do it like you do . But they’re still always a pain . Thank you again 😊
Thank you! Mine has been falling off regularly for years and this time I just couldn't get it to stay on the wall. Never knew the little prongs were on screws! DONE!
Excellent! I’ve had my fair share of loose towel bars. Those wall anchors really help when the screw hole no longer holds the screws in! Glad you’ve got a secure towel bar now!
A method that actually works! Love it!!
very clear to see what you are doing and verbal instructions are perfect. thank you for doing the work to help me. Your step by step was perfect.
Thanks, got stuck at a place and the video sorted it👍👍well made and explained.
Thank you for detailing and explaining. I have been trying to learn how to do little things around my house. This is the best video. Please do more easy household tasks. Carol Montalto
My towel bar is different, 3 pieces not including mounts. Harder to get level. This video helped me though. Thanks.
Thank you Bros
The install look so easy and perfect . I’m gonna try to install the towels bar today.
Great video! Thank you ! I’m working with a very out of level house . Forgot my level 🤣.
Careful on the plastic toggle anchors. Both anchors on each bracket must be installed so the "wings" of the toggle are horizontal as you push them through the drywall, otherwise when you set the anchor with the red pin the toggles could "touch" each other preventing them from sitting tight against the wall.
When checking if the holes are leveled, do place the level on the center or bottom of the hole?
@zander esp I usually put the first bracket in the wall first then I make sure the second bracket is level with the first. Place the level on top of both brackets and "rest" it on both brackets as you hold the bracket in place with your hand. Then you can mark your holes on the second bracket. Many ways to do it just my preferred method
Great video! Learnt fr yr video how to reinstall my bar towel after it came off. Didnt realise there is a screw at side of the round knob till i watched yr video. In less than 10.min, ta‐da ! Done! Thank you!
Great video! I needed the refresher!!!
One more thing.. sometimes ..some bars have brackets a bit lesser in size(in thickness). U fix them on wall with screws .but when u try to tighten the set screws .u will found out they r unbelievable tight right from the start. In reality the set screws pushing the bracket attached to the wall .nit holding them. Make sure to check that first if u r a newbie.
Thank you sir
Just bought my first home and i need to install this i wasnt sure how but this is helpful thank you 😅
Are ypu able to do a door lock tutorial
Theres a lock i want to install on the door and metal frame of the door
Not sure how to drill the metal frame and put a screw in
Excellent video and explanation. Thanks to share your knowledge and time.
You’re welcome! I’m really glad that my towel bar installation video was helpful!
This is def going to help me install mine. The measuring from the floor seems like a good idea, as I’m not sure that the window and stuff around are level… who ever build or did a previous remodel on this place before me did some shotty work, that I’m slowly repairing as money allows.
Excellent! Really glad my towel bar installation video was helpful! Thanks for watching!
Thanks, for simple easy steps!
You’re welcome! I’m really glad that you enjoyed my towel bar installation video! Thanks for watching!
Very informative thank you! Trying to renovate my bathroom by myself 😂😭
The screws on the bottom are not screwing into my anchor. When I’m trying to screw them into the anchor it’s like they are just pushing the towel rack off the anchor as I try to screw them in. Nothing is working, they are not easily screwing in like your video. Absolutely maddening I’m literally about to punch a hole in the wall instead.
😍Such a useful well made video. thank you so much, I'm going to do this over the weekend myself! so sick of waiting for guys to help me. 😅master bath here l come!
Rosemary Williams lol
Rosemary Williams hi
:) hello
I hear your pain. lol
Thanks a lot. Clear explanation ❤
I've already gotten this far and am looking for help because my anchors are spinning and after finaggling with pliers and a screw driver I got the screws flush to the bracket but not tight at all. My holes for the anchors are a little big now too.
I had a towel bar in a bathroom where the hole in the drywall got too big for plastic anchors. To fix it we used the metal folding type. They’re spring loaded so they fold to the size of the hole. Then flip open once behind the wall. Basically put the screw partly into the folding anchor, slip it into the wall and tighten. This will provide a super strong grip. Of course they come in different sizes too. Hope this helps!
@@TheRenderQ exactly the advice I needed, thankyou
Glad I watched this. Measuring up from the floor is definitely a good idea and will save me having to get help installing this. Great video, thanks!
You're welcome! I'm glad you got some useful information from my video!
You know you're doing something wrong when your walls starts to look like a piece of Swiss cheese....haha.
Haha! Hopefully you can get your wall patched up! But you’re probably going you have to use some good wall anchors when installing your towel bar! Thanks for watching!
Nicely Presented !
Thanks! I’m really glad that you enjoyed my towel bar installation video! Thanks for watching!
Excellent video!!! Thank you!!
You’re welcome! I’m really glad that my towel bar installation video was helpful! Thanks for watching!
Thanks for your help
How do you know what size drill bit to use
What do you do if you don’t know where the electric wiring behind the wall goes? Can one safely follow the instructions given?
I'm only a weekend handyman so I'm not exactly sure about how to know where the electrical wiring is located in the wall. On the wall in the video I know there are no electrical wires there. But if I'm correct, most electrical wiring in the walls will be secured to the wood studs. The only ones that aren't will be the ones going across the studs. I've installed a towel ring right above a light switch and electrical outlet in one of my other bathrooms and didn't run into an issue. However, you might ask a friend or co-worker for some additional advice before continuing if you're worried about the wiring in your wall.
What happens if you need to remove those anchors? Will it create a hole in the wall getting them out?
Yes! It will definitely leave a hole in the wall when you remove the wall anchors. The hole will become slightly bigger when you pull them out. You’ll need some pliers to grab them and twist to get them out. Of course without the screw in it. Hope this helps!
Lucked out...only a plastic screw-in anchor, not a toggle. Thanks for the help.
Been trying to rehang mine the past 6 years..still no luck. Th3 holes are just too big and the anchors just keep making larger and larger holes in the drywall. And the screws just either push through the drywall or just hang floppily. I can now nearly stick my entire pinky into the holes.
I did everything you did and after putting in set screws with the allen wrench the bottom of both sides are lose. What did I do wrong?
A handyman just installed our beautiful new towel bar and medicine cabinet, but both are uneven by about 1/16"!! He used a laser on the wall to measure (rather than a tape measure), and we are so bummed. The wall was freshly painted ... do you think 1/16" is enough to have him come back and redo it?
I know if the towel bar was uneven it would bother me every time I look at it. So if you feel the same way then maybe have him come back. His laser level is probably more accurate than a tape measure. However as I do DIY projects around the home I find that some walls/windows aren’t exactly level which could be why the towel bar is slightly off. Sometimes it depends on the reference point used for leveling. He may be able to adjust it without too much trouble. Hope this helps!
@@TheRenderQ It helps a LOT! Thank you for taking time to respond! I think I will send him a text and ask him to come back. Sure appreciate it!
I like everything about the video, it just makes me cringe when you move the drill around while drilling the hole. Why not just choose a slightly larger drill bit? By moving the drill around in a circular motion, you are less “in-control” of the size of the hole you are making, and going to remove more drywall on the internal aspect of drywall, (The place where you actually want the drywall to be the strongest (around the anchor).
Just push the drill in, with as little wobble as possible, then withdrawal. That’s the way the drill was designed to be used. Otherwise, like I said, good video.
) ...Plus, I would’ve checked for studs FIRST. You ideally want the screw to be located in the CENTER of a stud. By finding stud first, you could adjust the position of the towel rod slightly so that the right side is more-likely to hit the CENTER of the stud.
Hey thanks for the feedback! You're right about choosing the correct size drill bit! I thought I had the proper size but when I realized I didn't my first instinct is to rotate the bit around to enlarge the hole. I know it's not good practice to do it that way. Regarding studs, I did check for studs. On the first towel bar there is no stud on the left but there is a stud on the right (see it at 2:11). With the length of the towel bar, I could only mount it with the stud on one side. But I'm really glad you enjoyed the video overall! Thanks for watching!
I'm currently looking for a new towel bar but the old bracket was installed side by side but I can't find any good ones like the bell shape that are the same. Am I looking in the wrong places?
What brand towel rack did you use?
Thank you so much.
What is the name brand and model of this towel bar? Is it steel?
I don’t know the name brand of the towel bar I installed. I think I bought it at Lowes or Home Depot. And I think it’s made of aluminum.
I installalled a 3 towel rack as in the video. After a coupld of weeks, the rack started to come out even with anchors. What did we do wrong? Could you help please?
Thank you, really helpful
Who manufactured the towel bar, please? Thanks!
Can you recommend an anchor we can buy (not the one that came with the towel rack)?
I just used the plastic ones from the home improvement store. Just make sure it fits the size of screw you are using. I don't know the exact size of the ones I used off the top of my head but I currently have two sizes in my cabinet just in case for various projects. There are also metal anchors that flip out after you insert them into the wall. Those are probably more secure than the plastic ones. The metal flip out ones are useful if the hole in the drywall gets too big for an anchor. An employee at the store could probably help you with the correct size. Hope this helps!
Perfect! Thank you!
Did you have to drill a bigger hole for the side of the towel rail with the wall plug?
In my demonstration in the video yes I did drill a bigger hole for the wall anchor. I simply compare the size of the screw or wall anchor to the size of the drill bit. I always choose one slightly smaller than the screw or anchor. Hope this helps!
@@TheRenderQ Thanks!
Very helpful
Excellent! I'm really glad you enjoyed my towel bar installation tutorial!
Excellent !
Hey! Really glad that you enjoyed my towel bar installation tutorial! Thanks for watching!
Fifty years have passed and I have yet to successfully insert a plastic wall plug. I am overcome with a feeling of hopelessness.
Oh nice! That's a long time but as you can see it's pretty simple to do. Just don't drill the hole too big. You could find a scrap piece of drywall and do some practice on it to get more confidence on doing it!
@@TheRenderQ does the quality of these plugs vary? I tend to the buy the cheapest stuff.
To me all the plastic ones are pretty much all the same quality. I also just buy cheap plugs.
@@TheRenderQ can I request 'how to's' for other projects? I have about 100 in the pipeline and there aren't many good videos around.
Yeah let me know if you have other projects. It might give me ideas on new videos. I was planning on creating a whole new channel one of these days just for home improvement/repairs because this channel is mainly for tech reviews. I welcome your ideas!
What is the minimum power on a drill to be able to screw in screws like that?
I don’t think you need a lot of power to screw in screws with a power drill. I have mine on a lower speed setting. And this is an old drill from Eagle Hardware from many years ago... if you remember that store before it became Lowe’s.
@@TheRenderQ Mine has 4.5 A. I never tried to use it that way, but i will. great video.
Awesome, now im ready to install one 😊
So my husband made the hole too big that anker even went through. Is there a way we can savage that.
There are different types of wall anchors. I’ve been thinking of making a video to solve the problem you just described. But in the meantime you can use the wing-type wall anchors made out of metal. They have a spring that holds them open when they’re behind the wall. First put a screw through it and towel bar wall bracket. Then squeeze the spring loaded anchor and slip it into the hole in the wall. This will provide an ultra secure hold. You can find these at your local hardware store. I have these in one of my bathrooms. My towel bar isn’t going anywhere! Hope this helps!
What if you have metal studs?
I haven’t had to work with metal studs before so I’m not sure how much I can help. However you’ll probably need a drill bit made for metal. The procedure is most like the part where I put a screw into the wooden stud. Just don’t drill the hole too big!
Very helpful. Thanks.
What size drill bit?
Sorry I don’t know the drill bit size. Usually I just hold the bit up to the screw and pick a bit that is just barely smaller than the screw threads. Hope this helps and thanks for watching!
Thank you for posting this helped me fix mine
my towel rack just broke off, so I just made an emergency pit stop on this video. thanks chief.
You're welcome! Towel bars come loose all the time! I'm glad the video helped! Thanks for watching!
Thank you for the video.
You're welcome! I'm really glad you found the video helpful!
When buying a replacement bar, do you measure from screw to screw to find out the size? Because my current bar is 18.5" from screw to screw, so I am not sure if I should buy 18" ?
Yes you could measure screw to screw to get an approximate size. But each towel bar might be slightly different in length so the original holes won’t necessarily work. But to get the length you could measure the bar itself but that also varies with each bar. I think approximate length will be good enough. Hope this helps!
@@TheRenderQ thank you. I am trying to avoid drilling any new holes. Nothing wrong with current bar just trying to update to matte black and now thinking that maybe just painting it black instead.
Are you assuming the studs are wooden? I’m pretty sure mine are steel- is it possible to drill into them?
Thanks for your question! Yeah I was assuming the studs are wooden. At least in all the homes I’ve lived in. Maybe if you’re in a commercial building like an apartment or condo you would probably have metal studs. I don’t have any experience drilling into metal studs so I can’t really help you there. You’d need a drill bit made for metal plus I don’t know how thick the outside layer of the metal stud would be. But it’s possible to drill into them since the metal studs are hollow. But again I don’t have experience with them. If you’re unsure then I’d recommend using wall anchors for the installation. Hopefully where you need to put the anchors still allows you to place the towel bar where you want it.
Actually, I live in Florida and all new construction is concrete block with steel studs. Not commercial...just how it’s done here.
Thanks
Awesome video, easy does it!!! I will install my rack as I watch your video…… lol
Thanks so much
Excellent! I'm really glad you can use my video for step by step instructions as you do your install! Thanks for watching!
Thank you! I got a good idea when I fixed mine!
Nice! Glad the video helped spark an idea to help you get yours fixed!
Anybody know what screws are used to make the bar tight?
clean and easy...
My towel bar is loose, i'm having trouble unscrewing the little screw with the allen key, it just spins and doesn't seem to be coming out. Any tips?
Do you need to pre-drill the hole going into the stud? Or can you just put the screw into the stud
Thank you that was great :)
You’re welcome! I’m glad my towel bar installation video was helpful! Thanks for watching!
you forgot to say the name of the anchor that you use
Sorry! I just know those anchors as plastic wall anchors. But thanks for watching!
excellent video! thanks for the clear instructions
I really appreciate your comment! I'm really glad you found the video instructions to be easy to follow! Thanks for watching!
That white screw anchor is not very strong. I havevseen them pull out when soneone removes a towel from the rack.
Yeah I’ve seen those anchors come out of the wall. Depends on how rough people are when yanking the towel off the bar. It also depends on whether the proper size hole is drilled. These towel bars are still holding very strong on my wall since I installed them. I’ve used these plastic anchors on other towel bars and towel rings around my house with no problem. Thanks for watching!
Good video
Thanks.
perfect, thanks so much
Good video.
THANK YOU💯💯💯🙏🏼
Great Video, very helpful...Thanks
I'm really glad to hear that you found the video helpful! I often pick up my camera and make a video while I'm making my home repairs but it takes me 3 times as long to finish the project! Ha ha!
Such a helpful video!
Great video, very detailed. Thank you for making this
Thanks for watching! I'm really glad you enjoyed the tutorial!
How are you choosing what size drill bit to use to create initial hole?
When I select a drill bit, I'll hold up the screw or drywall anchor, then select a drill bit that is just slightly smaller than the diameter of the screw or drywall anchor. Hold the bit up against the screw so you can see the diameter of the screw and drill bit. I hope this answers your question!
sometimes the manufacturer will include a paper template to make the process easier!
Yes! You know what? This towel bar actually had the template printed on the inside of the box. I didn't know it was there until I was done with the installation and in the process of flattening the box to recycle it!
Can you use those fat drywall screws instead of the fancy anchor you use?
شكرا استفدت كثير
Was helpful yea
Great video
Thanks! I'm glad you enjoyed the video!
Thank you!!!😘
Cut the bar to 16” and you can mount both side on a stud….
That tiny plastic anchor isn't going to hold up after time to people yanking towels off the bars.
Thanks for the feedback! You're probably right about the plastic anchors. However that's what is included in pretty much all products that need mounted to walls. Definitely the best are the metal spring-loaded anchors. But I think the type that was included with the towel bars I installed will last for quite a while.
That's what I thought, too - the problem arises when angular forces are applied, such as someone pulling the towels off the bar sort of to the side, or essentially, in a direction that doesn't align with the weight-bearing design. You're right about the metal anchors!
How many volt is enough for the electric drill? I don’t want to buy the wrong one. Thank you.
I don't think you need a lot of volts for the drill. Any basic drill will work. Buy an affordable one. My drill is more than 15 years old and it still works. I didn't pay any attention to the specs of the drill when I bought it. I had to repair the cord once but it's the one I used in this video. Hope this helps!
TheRenderQ thank you.
Way to drill the heck out of that drywall 3-4 inches in a circular motion and hammer the poop out of those anchors!! You could use some hair on those set screws!