Helpful video. I needed to confirm whether certain settings were present in the Aorus Master's BIOS before purchasing. I appreciate when content creators also make videos covering the little things that matter instead of just solely going after what's the most popular angle to get views. There's another channel out which claims to do a 'FULL' review on this board, yet doesn't even cover an inch of the bios. Lol what a joke. Anyway, helpful vid. Thanks.
Hi im trying to get my memory to the 3600mhz but im just black screening and i have no idea how to change anything new to the b550 motherboard was using asus b350 before
Hey mate, you need to manually up the voltage of the RAM, I have the exact same setup and manually setting it (to 1.320V) I managed to get the system up and running! Enjoy :p
@@IAmLoveR YOU my friend are a legend. Ive been looking for an answer for hours. And it was something simple. I only noticed my RAM was low after doing an benchmark. Been like it for months haha
I changed to Profile 1 (3200mhz) and when I f10 (saved/exited) my Display went black as It was restarting. It stayed black for so long that I decided to turn off my PC. Upon restarting it, it gave me the BSOD in a loop about 10 times before I decided to shut it down again. Is this my RAM or MotherBoard as the problem?
I had a problem with this MB, would not detect second memory stick for dual channel in A2&B2 as recommended. I have installed the memory one at a time and they work fine at their clock speed. I have updated the bios and had the same problem, instead of showing 32gb 3600mhz (16gb sticks X2) G skills. it would only show 16gb in any slots on the MB. Any help or what would I have to look for or is the MB defective. I have put these memory sticks in another MB and the are working great and have swap out the memory sticks from that MB 16gb 3200mhz 8gb per stick X2 but only show one stick install @8gb 3200mhz.
Bro I find a solution. I learned about the fact that the DRAM frequency is given by Base Clock Frequency (BCLK i think) × Sistemy Memory Multiplier. In the x570 Aorus bios, in the Tweaking menu, there is an option called Sistem Memory Multiplier, so you have to tweak that value to adjust Ram frequency. For example, usually the BLCK is 100Mhz stock, so if the Multiplier is 21.33, the ram frequency will be 2133Mhz; if you have 3200Mhz RAM, you have to adjust the Sistem Memory Multiplier to 32.00.
My pc was not getting on so i tried all the things even removing the battery, later after reinstalling the processor it worked, when m entering the bios i changed to load optimized default and after 10 sec its bios gets hanged, in windows the cpu clock is showing above 4 giz. Ne idea of how to bring it to normal ...
What is that bios flash button on the back. Does that mean if I accidentally hit that it will wipe everything out where the motherboard won’t recognize anything
i have a problem. so i bought some 32 gb corsair vengeance rgb pro 3200mhz I went into the bios and saw its only at 2133 so i clicked XMP disabled and it showed me XMP profile 1 where it says Ddr4 3200 so i hit save and exit and the pc booted somehow after a really long time like over a minut and then i shut it off and went in the bios again and it said that something happend wrong and its at it default settings so its agin 2133 mhz pls help
Can you help. I bought a gigabyte motherboard z390 m gaming but for some reason the bios layout shows like yours but in the manual it's shows as 'mit, system, bios, at etc. But mine looks like yours and I've been going through the web to find something. Any ideas?
Jørn Mulder so my aorus elite wifi is coming soon. When i install everything and boot ill just stick with same bios outta the box right? Like no need to update it to the latest because many people say the latest bios doesn't save any settings u change on it.
@@bodz9408 don.t know about that. I think latest bios would be good. I get my pc tomorrow. The Ultra board. And 3700x ryzen. And gskill 2 x 8 3200 cl 16
I've had this board for nearly 2 years now. One thing that annoys the hell out of me is the sound/audio output is extremely low for some reason. I've tried everything and cannot get my volume to what it was like on my systems. Has anyone else had this issue with this board? All volume levels are up but the output is 15% of what my speakers normally put out.
I recently bought a Gigabyte X570 Aorus ELITE and i'm also having some RAM issues. I can't enable XMP so my clockspeed is set to 2133mhz. Anyone know how to fix this? Specs: AMD Ryzen 9 3900X Boxed Gigabyte Aorus X570 ELITE Corsair Vengeance RGB Pro CMW16GX4M2C3200C16
@@thinkcomputers1 I would really love to see that as i just installed it this morning. Also i would love to see a video on precision boost/OC etc. Is it set "ON" automatically or do i need to turn it on manually? My mobo with the 3700x seems to be auto-overclocking already so i presume it is "ON" as default?
I have one m.2 installed on my aorus pro x570. And bios shows two m.2 as boot option 1 samsung evo 1tb 2 windows boot manager (samsung) Should i delete the second boot option? Or disable it? Your advice please, i am not sure if its normal thing 🌚
so i am looking for the quiet boot function in this bios. my pc beeps once every time i start it and id rather not hear that it is booting successfully every single time. any help would be greatly appreciated. great video btw
I am using Gigabyte B450 Aorus Pro and in the BIOS I see NOTHING like this. I pressed delete when the system booted up and the interface is so different. I cannot find CPU temperature anywhere. The closest thing I could find is "System Health" but it did not help at all...
so my aorus elite wifi is coming soon. When i install everything and boot ill just stick with same bios outta the box right? Like no need to update it to the latest like u said the latest wont save anything. Please help me guys because i orderd mine two days ago and i see people saying that its bios is not saving anything. Im kinda panicking Like is it really bad thing. My cpu is ryzen 7 3700x
My bios is running at about .5 fps, not exaggerating. My mouse cursor doesn't move, and using the keys takes about 2-4 seconds to translate on the screen. Pls help
important question to me, how does the mouse movement in gigabytes bios compare to msi? which one has smoother more responsive mouse movement in the bios? it looks like msi from videos. do either have acceleration?
So reason why I haven't gone Gigabyte for a few years was cuz of their weird messy BIOS, and I'm sure some people would agree. When did they do this revamp? Looks much cleaner..
@@mitchputerbaugh1940 Yep. Bought G.Skill, worked instantly, no hassle. I ended up buying 6 sticks of Corsair, only 1 of them would go into 3200 MHZ, and that was through manual settings from an official guide I found from Corsair - not even through XMP Profile. So I contacted the shop I purchased the Corsair stuff, explained it to them and I send it all back for a refund and ordered G.Skill. Works awesome, plug and play.
@@mitchputerbaugh1940 Weird! Does your motherbord support 3600 in your configuration? Some boards don't support it for example in 2x16 I think? Not sure... Did you try the manual settings, trying to get it to 3200? Also try 1 module at a time, see if that works... I found that one working corsair module by just using one :) It ran fine in every bank, whereas all other 5 modules gave issues in each bank.
What RAM are you using? I’ve Ben having a LOT of ram compatibility issues. Gone through several kits and I can’t find ram that is 3200 c16 with DIMM 2and 4. Edit: I’m using Auros elite with 3600
I realy like to know how to change mhz of dram.its set 3607.34mhz but my processors providers (3700x amd)suggest to run it @3733c17 for the lowest latency.couldnt figure out how to set this and appreciate any help.nice video btw
Thanks for this video! I have the elite. I also have 3600 ram and it runs at 2133. I enable XMP and run a bench mark and it says it’s running at 2133. I restart my computer and bios says it’s back at 2133. Any thoughts??
Thanks for the video. Trying to remotely help out a friend who has this bios - can't figure out how to enable the onboard hdmi port for an additional monitor. There used to be an option to enable onboard graphics in earlier gigabyte bioses, but can't find it here :s
Wow why your CPU voltage is over 1.3V ? It seems really high for idle. I'm running a 3900X on Aorus X570 Pro wifi mini-ITX bios F5 and cpu is just 1.02V.
is there a way to contrl rgb fusion through bios? I was able to do full rgb fusion control on my x470 board but with this one I had to go by using their software version of it.
How do you actually change the fan curve? My CPU cooler fans seem to be set at a much lower curve than I typically use and it's much louder than I would prefer as a result.
So every time I start my pc it goes to this and I can’t get out of it I try to save and leave and f10 and nothing works what do I do I have school in a couple hours
![F-Zero X Can't Be Made Today [AGR Part 2]](/img/1.gif)
What do you think of Gigabyte's latest BIOS?
I'll tell you if you tell me if the mouse is still laggy like all previous Gigabyte motherboards?
@@d4popov Not laggy at all
Is Gigabyte going to put this UEFI BIOS on older Motherboards like b450 ?
@@thinkcomputers1 good to know!
My m.2 which has the OS doesn't show in the bios, but the PC runs fine
Helpful video. I needed to confirm whether certain settings were present in the Aorus Master's BIOS before purchasing. I appreciate when content creators also make videos covering the little things that matter instead of just solely going after what's the most popular angle to get views. There's another channel out which claims to do a 'FULL' review on this board, yet doesn't even cover an inch of the bios. Lol what a joke. Anyway, helpful vid. Thanks.
neyon3D glad you enjoyed the video, we try and do BIOS overviews on all boards we get!
ThinkComputers Haha I just came from an OC3D “review” thinking this 🤣
@@urmasterjohn Right, that's precisely the video I was referring to. smh
Hi im trying to get my memory to the 3600mhz but im just black screening and i have no idea how to change anything new to the b550 motherboard was using asus b350 before
Hi, have you sort out how to set the ram? And does your gigabyte randomly stop booting and shutting down?
@@kanhkutpeo i have it working now thank you though i still dont get really how to boost stuff manually now and how to overclock my gpu.
what is xmp high freq setting doing? i have latest bios now and i can select level 1, level 2, level 3, what is all that? can you explain ?
Looks good, Gigabyte have been making a bit of noise about the new bios so thanks for sharing.
Glad you enjoyed the video!
i am using x570 aorus ultra paired with 3900x. turned on XMP profile1 always crashes. my RAM is corsair vengeance 4x8gb 3200mhz.
Hey mate, you need to manually up the voltage of the RAM, I have the exact same setup and manually setting it (to 1.320V) I managed to get the system up and running! Enjoy :p
@@IAmLoveRThanks ! I had the same problem.
I had the same problem what fixed it tho (after trying a lot of solutions) is updating my bios
Put your memory in the A2 and B2 lanes, NOT A1 and B1..
download.gigabyte.com/FileList/Manual/mb_manual_x570-aorus-master_1002_190708_e.pdf
@@IAmLoveR YOU my friend are a legend. Ive been looking for an answer for hours. And it was something simple. I only noticed my RAM was low after doing an benchmark. Been like it for months haha
Can you show me where Onboard Graphics Menu is in BIOS?
The board got no ports for a monitor to connect to iGPU.
Thank you for the upload. I built my first computer, and I am learning how to navigate the BIOS. This is very informative!
I changed to Profile 1 (3200mhz) and when I f10 (saved/exited) my Display went black as It was restarting. It stayed black for so long that I decided to turn off my PC. Upon restarting it, it gave me the BSOD in a loop about 10 times before I decided to shut it down again. Is this my RAM or MotherBoard as the problem?
hello I have a problem with the onboard video card does not send an image to the screen .. thanks
I had a problem with this MB, would not detect second memory stick for dual channel in A2&B2 as recommended. I have installed the memory one at a time and they work fine at their clock speed.
I have updated the bios and had the same problem, instead of showing 32gb 3600mhz (16gb sticks X2) G skills. it would only show 16gb in any slots on the MB.
Any help or what would I have to look for or is the MB defective. I have put these memory sticks in another MB and the are working great and have swap out the memory sticks from that MB 16gb 3200mhz 8gb per stick X2 but only show one stick install @8gb 3200mhz.
How can I change the ram speed in the bios? If i select "Profile1" it wont get in windows. I have 3600 Mhz but only run at 2133 Mhz :(
Me too bro! Same thing, I can't find Memory Frequency option to manual set my 3200mhz rams
@@xthetracervgitstime4gaming408 try updating your bios and put your ram into 1b 2b slots
Bro I find a solution. I learned about the fact that the DRAM frequency is given by Base Clock Frequency (BCLK i think) × Sistemy Memory Multiplier. In the x570 Aorus bios, in the Tweaking menu, there is an option called Sistem Memory Multiplier, so you have to tweak that value to adjust Ram frequency. For example, usually the BLCK is 100Mhz stock, so if the Multiplier is 21.33, the ram frequency will be 2133Mhz; if you have 3200Mhz RAM, you have to adjust the Sistem Memory Multiplier to 32.00.
xTheTracerVG | It's Time 4 Gaming so this could work with 3600! :)
I can’t find the intergrated graphics settings. I wanna turn it on, so I can use 2 monitors with HDMI both
whats the Amazon Link for ??? cuz there no indication the Gigabyte X570 AORUS Master there all the older ones nothing above 470's
i hear all amd motherboards have slow boot times, but MSI has fixed this with bios update, what about gigabyte?
My pc was not getting on so i tried all the things even removing the battery, later after reinstalling the processor it worked, when m entering the bios i changed to load optimized default and after 10 sec its bios gets hanged, in windows the cpu clock is showing above 4 giz. Ne idea of how to bring it to normal ...
Superb video!
I want a question.
Hoy can i activate the dual graphics or activate the integrated graphics on cpu in the BIOS?
Any update on the F11 bios ?
Is there setting about graphic card? Can't find it:(
This is great, thanks! Are you able to do a video on the Crosshair VIII Hero?
We do not have that motherboard currently, if we get it in we will definitely make a BIOS video for it!
Is there no way to disable the onboard wifi and bluetooth? I don't use them so i thought there must be a bios setting to turn them off.
I have one m.2 with windows but in bios it shows I have boot option one and two?
I have a 570 mother board and when I endeble xmp it won’t do it .. I need help I don’t know much about computers
What is that bios flash button on the back. Does that mean if I accidentally hit that it will wipe everything out where the motherboard won’t recognize anything
Can't see my gpu in device manager at all on this board. Help
i have a problem. so i bought some 32 gb corsair vengeance rgb pro 3200mhz I went into the bios and saw its only at 2133 so i clicked XMP disabled and it showed me XMP profile 1 where it says Ddr4 3200 so i hit save and exit and the pc booted somehow after a really long time like over a minut and then i shut it off and went in the bios again and it said that something happend wrong and its at it default settings so its agin 2133 mhz pls help
where is the fgb fusion settings in the bios?
does this also apply to GIGABYTE X570 AORUS ELITE AMD Ryzen 3000
Yeah i want to know too
It's been many months, still no answer @ThinkComputers any ideas?
It does apply to the AORUS ULTRA. I imagine it's across the whole AORUS lineup
Can you help. I bought a gigabyte motherboard z390 m gaming but for some reason the bios layout shows like yours but in the manual it's shows as 'mit, system, bios, at etc. But mine looks like yours and I've been going through the web to find something. Any ideas?
Hi, Thanks! can you please make BIOS Overview Gigabyte X570 AORUS ELITE
i think it will be the same
Jørn Mulder so my aorus elite wifi is coming soon. When i install everything and boot ill just stick with same bios outta the box right?
Like no need to update it to the latest because many people say the latest bios doesn't save any settings u change on it.
@@bodz9408 don.t know about that. I think latest bios would be good. I get my pc tomorrow. The Ultra board. And 3700x ryzen. And gskill 2 x 8 3200 cl 16
@@jornmulder same build but 16gb3600mhz rtx 2060
Helo bro, i got coil whine with this motherboard...anything can help to make it not whine anymlre
A motherboard can have coil whine? I think that’s your gpu
Or psu
Is there any RGB option on the BIOS?
aorus b450m has. so i gues yes
@@28KKaann how do i change the rgb colour in the bios
Where do I limit the transfer speed of PCIe slot?
I've had this board for nearly 2 years now. One thing that annoys the hell out of me is the sound/audio output is extremely low for some reason. I've tried everything and cannot get my volume to what it was like on my systems. Has anyone else had this issue with this board? All volume levels are up but the output is 15% of what my speakers normally put out.
Where are the peripherals settings?
how can i change it from 9E code back to 40 logo
How do you enable integrated graphics?
I recently bought a Gigabyte X570 Aorus ELITE and i'm also having some RAM issues.
I can't enable XMP so my clockspeed is set to 2133mhz. Anyone know how to fix this?
Specs:
AMD Ryzen 9 3900X Boxed
Gigabyte Aorus X570 ELITE
Corsair Vengeance RGB Pro CMW16GX4M2C3200C16
Did you solved it? I have the same problem
Same here
@@1234knicksfan to resolve this up your voltage for your RAM to 1.36v in bios then you can enable xmp profile. 👍🏻
same problem, I can enable xmp profile, but when using cpu-z my ram is still in 2133mhz. I'm so frustrated.
@@yato8940 give your ram more power 1.36v and its all good
How to add another monitor in this mother
I need help my is at 3200mhz, where to adjust the frequency we have same motherboard though
The video show you how @1:11
@@CigsAce21 so Profile 1 sets your RAM at its full capacity automatically?
Nice vid, so you don't have to Q-flash your bios before using it for the first time ?
No you don't have to
@@thinkcomputers1 thanks
Could you do the app center?
We could possibly do a video on that...stay tuned!
@@thinkcomputers1 I would really love to see that as i just installed it this morning. Also i would love to see a video on precision boost/OC etc. Is it set "ON" automatically or do i need to turn it on manually? My mobo with the 3700x seems to be auto-overclocking already so i presume it is "ON" as default?
Does the Gigabyte X470 Bios look similar?
I have one m.2 installed on my aorus pro x570. And bios shows two m.2 as boot option
1 samsung evo 1tb
2 windows boot manager (samsung)
Should i delete the second boot option?
Or disable it? Your advice please, i am not sure if its normal thing 🌚
so i am looking for the quiet boot function in this bios. my pc beeps once every time i start it and id rather not hear that it is booting successfully every single time. any help would be greatly appreciated. great video btw
I am using Gigabyte B450 Aorus Pro and in the BIOS I see NOTHING like this. I pressed delete when the system booted up and the interface is so different. I cannot find CPU temperature anywhere. The closest thing I could find is "System Health" but it did not help at all...
can i change the rgb colour in the bios
where is the windows OS section bruh😭😭 i need to fix the secure boot
Is the Asus x570 ROG motherboard bios better than the Gigabyte x570 Aurous motherboard bios?
My x570 aorus has enabled XMP but when using the CPUZ app, my RAM is still in 2133mhz. :(
I am having the same issue did you figure out how to fix it?
@@mitchputerbaugh1940 Just figured out my mobo doesn't support my ram in the VQL, so it can only support the capacity up to 3200mhz.
@@yato8940 thanks
so my aorus elite wifi is coming soon. When i install everything and boot ill just stick with same bios outta the box right?
Like no need to update it to the latest like u said the latest wont save anything.
Please help me guys because i orderd mine two days ago and i see people saying that its bios is not saving anything. Im kinda panicking
Like is it really bad thing.
My cpu is ryzen 7 3700x
My bios is running at about .5 fps, not exaggerating. My mouse cursor doesn't move, and using the keys takes about 2-4 seconds to translate on the screen. Pls help
How to get to the onboard lan setting?
Please How can I do to updated the bios in this board?
Is there any way to determine the BIOS version without enabling the board itself ?
I have the z390 elite. Is there a way to update the gigabyte bios ?
Hello guys!!! I'm getting a laptop aorus 15p yd, and I really want to get into the BIOS. Does anyone know how to do it?
important question to me, how does the mouse movement in gigabytes bios compare to msi? which one has smoother more responsive mouse movement in the bios? it looks like msi from videos. do either have acceleration?
How do I save my fan setup..as when I manually set fans, when I go into windows it seems to change?
where can i change secure mode this bios
Used this to walk someone through where to find xyz settings in the menu's in the bios.. tnx a ton
Still no tREFI setting ... my x370 don't have it either.
Hey, do you have USB issues with your Aorus Master + Ryzen 3900x? Agesa V2 Update didnt help me
why the profile is xmp if you are using AMD ?, I thougth xmp is exclusive for intel mobos and DOCP dor amd mobos
Great video, I just ordered the exact motherboard and this will be a great insight into it
Where czn I find run diagnostics
Hey looking to do a water cooling build, I have Crosshair board thinking of giving Gigabyte a try do recommend this board.
Yes it is a great board
So reason why I haven't gone Gigabyte for a few years was cuz of their weird messy BIOS, and I'm sure some people would agree. When did they do this revamp? Looks much cleaner..
I can't get my Corsair 3200 ram to work at 3200... Even with the XMP profiles. Not sure what to do?
Me either did you figure it out?
@@mitchputerbaugh1940 Yep. Bought G.Skill, worked instantly, no hassle. I ended up buying 6 sticks of Corsair, only 1 of them would go into 3200 MHZ, and that was through manual settings from an official guide I found from Corsair - not even through XMP Profile. So I contacted the shop I purchased the Corsair stuff, explained it to them and I send it all back for a refund and ordered G.Skill. Works awesome, plug and play.
@@AKARazorback very strange because I am running Gskill and it doesn't run at 3600.
@@mitchputerbaugh1940 Weird! Does your motherbord support 3600 in your configuration? Some boards don't support it for example in 2x16 I think? Not sure... Did you try the manual settings, trying to get it to 3200? Also try 1 module at a time, see if that works... I found that one working corsair module by just using one :) It ran fine in every bank, whereas all other 5 modules gave issues in each bank.
What does AA mean on the motherboard I’m new to this pc stuff /:
Where is CPU Core/Cache current limit on Aorus boards or is it worded differently??
I can’t find chipset section on this bios. I need to enable the HDMI port on the motherboard.
It’s not compatible with Igpu chips.
How do I update bios, if the stick drive is not read it?
What RAM are you using? I’ve Ben having a LOT of ram compatibility issues. Gone through several kits and I can’t find ram that is 3200 c16 with DIMM 2and 4.
Edit: I’m using Auros elite with 3600
He's using a total of 16 gb RAM
I have 4 sticks of corsair vengeance pro (32go)when I enable the xmp1 with 4 sticjs i get a blue screen but when i use 2 sticks the xmp1 works
Bro i have three drives and 2 of them shows as removable device can u tell how to fix that. Have the sam MB
Can someone tell me how to boot into Safe mode on this motherboard? I legit cannot find it and no its not an option on the post screen.
can anyone tell me how to enable sgx bios?
Can you update the bios from within the bios over the internet? Or with USB only...
I realy like to know how to change mhz of dram.its set 3607.34mhz but my processors providers (3700x amd)suggest to run it @3733c17 for the lowest latency.couldnt figure out how to set this and appreciate any help.nice video btw
Thanks for this video! I have the elite. I also have 3600 ram and it runs at 2133. I enable XMP and run a bench mark and it says it’s running at 2133. I restart my computer and bios says it’s back at 2133. Any thoughts??
Did you ever figure out how to fix it? Im having the same problem
Try a bios update, if it's the latest one, try it manually? Might want to pick up more information though
Bump, im running Corsair Dominators 64GB and it will only run at 2133 anyone have a fix?
Thanks for the video. Trying to remotely help out a friend who has this bios - can't figure out how to enable the onboard hdmi port for an additional monitor. There used to be an option to enable onboard graphics in earlier gigabyte bioses, but can't find it here :s
Does the elite and the master x570 have the same bios?
Have the same bios but it’s really laggy? My mouse curser is really slow and laggy? Any ideas why?
Wow why your CPU voltage is over 1.3V ? It seems really high for idle. I'm running a 3900X on Aorus X570 Pro wifi mini-ITX bios F5 and cpu is just 1.02V.
Do you know what the wattage/amperage specs are for the cpu_fan header on this mobo? Can’t seem to find an answer anywhere
Is this the same as the Gigabyte z490 Boards Bios would be?
Can I set the rgb colors of the motherboard through bios? Because the rgb fusion software is just awful.
It has a hidden secet small fan under armer near back panel which makes us crazy...high freq noise.
Where can the long and short power duration tweaks be found?
How do I put my ram speed at its correct speed
How do I enable on board graphics??
Can make a video Bios setting Gigabyte z490 master?
Just bought it but I have 8 hard drives I use a lot (redundancy). Any suggestion to work the extra 2 drives into the system?
is there a way to contrl rgb fusion through bios? I was able to do full rgb fusion control on my x470 board but with this one I had to go by using their software version of it.
No chipset fan option like on the MSI boards? A zero fan mode would have been nice to see... Is the fan loud on this board?
Fan is barely audible during operation
Gigabyte adding this in their next BIOS update. There is a beta build a rep of theirs has posted over at overclock.net.
Where is the Fclock for memory overclocking?
This would apply with the x570 Aorus Elite correct?
Yes for the most part
How do you actually change the fan curve? My CPU cooler fans seem to be set at a much lower curve than I typically use and it's much louder than I would prefer as a result.
So every time I start my pc it goes to this and I can’t get out of it I try to save and leave and f10 and nothing works what do I do I have school in a couple hours
Do you have windows 10? And are you still having this error?