@@ManjitSinghFriendsEngineering This machine has no safety senses, you fool! The only safety feature is the bar at the top, but it will not work with him in that position.
I've been in print and diecutting for 42 years and this is the most dangerous video i have ever seen. You never stand at the side of platen when running to operate it, never.
Thank you for posting your comment. I was looking for a video to show my brother what I did as a Diecutter as we were talking about videos of industrial accidents. I was nearly crushed to death in a larger heated version of this machine as a coworker and I had to climb in and clean the dies with our feet up on the heated side and scrub the dies with metal brushes to get rid of the excess built up[. As we were about to climb in the press it activated one more time BY ITSELF. BY ITSELF. We stood there staring at it for awhile and I told my coworker, "I'm going down and shutting the main switch off, and I will wait for the flywheel to STOP." We were still nervous about getting in there anyway but I think about it still to this day that we probably both would have squirted out the sides of that press, not to but too mention the smell of the remains of two humans crushed in a 400 degree press would have had a terrible smell to boot, and who exactly cleans that mess up? The black bar on the front of the press in this video seems to have the same safety sensor as the press we had, but we loaded from the front on a platform.
I used to operate a machine like that, but not in the dangerous way he's doing it. He's supposed to be feeding the sheets broadside, not from the side of the machine. He looks like he's going to get his arm crushed each time!
Trabalhando errado sorte que tem um sensor pra parar ali da pra margear na frente da máquina o operador que é ruim assim é muito mais perigoso aqui no Brasil fazemos diferente e que bagunça , trabalho em gráfica desde 2008
@@ManjitSinghFriendsEngineering Yes sir, I'm sure your diecutter have excellent safety features. I was just curious why this factory uses a diecutter to make an RSC box that requires the making of dies. My guess would be that they don't have a slotting machine.
@@ManjitSinghFriendsEngineering mashine have safety sensors and still I saw one man with no arm in this current generation mashine opretors my grandfather worked on Chander mashine which have over 1500 hundred impression per hour and never have a accident or even look in any danger and this noob opretor is living dangerously on evrey impression
I be have ran this type of machine for 20 years and let me tell you this is not how you feed the machine. And why are they scraping each piece individually when you can stack it and use a scraping tool?
Sir this is attitude of some people in my country 😠😡😤 They neither care about workmen safety nor workers listen to owner about safety. You are right they have not invested in scraping tool. Let me tell you that as auto platen machines are becoming increasingly adopted in bigger more professionally managed packaging houses. Bobst has manufacturing presence in India as well.
This is not how you feed a diepress, this is how people lose an arm.
i understand this video like: one cardboard =one humain arm , absolutely insane how this man risk her arm ...
I've been working as a diecutter for 16 years.... this is so wrong ! I hope there are no injuries in this factory....
The machine has safety sensors
@@ManjitSinghFriendsEngineeringI think it cannot be stop ontime :(
Me too. This is so dangerous, the way they are doing that
@@ManjitSinghFriendsEngineering
This machine has no safety senses, you fool! The only safety feature is the bar at the top, but it will not work with him in that position.
@@redblade8160 Yes I agree. The bar and the "Oh Sh*t button behind him. Hard to reach with your arm(s) in the press.
අඩෙ die කට් මැශින් එක මේක නේද, මාර අනතුරුදායක මැශිමක් නෙ 😢
lankawe malli kenekge atha ahu wela thibbe mekata neda 😓😓
mamath a mashin aka mokkda balanna awe pww a malli 😥😥😥😥😩
Math😓
මමත් .die ම තමා අහු උනොත්
@Udani Widvandi mmath 😣
May be not today, but probably one day, friends will die.
Lmao xd💀
OSHA would have Stroke watching this
ලංකාවේ කොල්ලාගේ accident එක දැනගත්තාට පස්සේ බැලුවේ😥😥😥
Math
මමත්
My favorite sound is the continuous like the fan
dangerous danger danger
I seen guys working this way first time .
You are my inspiration Sir...
- A small scale manufacturer from Mumbai..
BOBBST MACHINE LAGANE bolo very hard work
por qué doblan el material rompen la flauta y aparté sacan y meten el material por los lados , es muy peligroso
Super
I guess they are in a hurry, I hope they are experienced. 'Cause, damn!
Mấy ông Việt Nam mà làm thì 1 mình cân hết😂😂😂😂😂
Nice work
I've been in print and diecutting for 42 years and this is the most dangerous video i have ever seen. You never stand at the side of platen when running to operate it, never.
Thank you for posting your comment. I was looking for a video to show my brother what I did as a Diecutter as we were talking about videos of industrial accidents. I was nearly crushed to death in a larger heated version of this machine as a coworker and I had to climb in and clean the dies with our feet up on the heated side and scrub the dies with metal brushes to get rid of the excess built up[. As we were about to climb in the press it activated one more time BY ITSELF. BY ITSELF. We stood there staring at it for awhile and I told my coworker, "I'm going down and shutting the main switch off, and I will wait for the flywheel to STOP." We were still nervous about getting in there anyway but I think about it still to this day that we probably both would have squirted out the sides of that press, not to but too mention the smell of the remains of two humans crushed in a 400 degree press would have had a terrible smell to boot, and who exactly cleans that mess up? The black bar on the front of the press in this video seems to have the same safety sensor as the press we had, but we loaded from the front on a platform.
The guy in the white shirt is the one who works the most.
He may be on light duty. In his defense.
ما هذا العك العدد فى الليمون شوف العامل اللى بيحط الفرخ يكسره ازاى
This machine should be going at full speed!
Kalau menurut saya itu salah masuk dari kiri,beresiko tinggi
Friends die --- cutting machine!!
I am truly scared.
Verry dengeres this job
Way too dangerous...
I used to operate a machine like that, but not in the dangerous way he's doing it. He's supposed to be feeding the sheets broadside, not from the side of the machine. He looks like he's going to get his arm crushed each time!
Why there are working 4 men on a die cutting machine .
@cezarc1345
The other 3 men are substitutes, in case one of them loses their arm in the machine!
Guy on the left is gonna lose his arm one day
I think he lost his mind before his arm
0:56 safty triger! It is quite safe mashine! It is one more safty triger at edge of the plate!
@@sasaploskic7875 yeah now you say that, it looks really safe 🤪
@@leebarrett9581 I was working on simulare mashine! Not so scary
The machine has safety sensors
What is the smallest size of this machinel?
22 32
This machine we only make 2 people, 1 person put in and 1 person removed, but I find their way of putting paper in is dangerous.
Size 22×32 die cutters
Boxes Rate
OMG cuanta gente habra perdido sus brazos ahi. Donde esta OSHA?
Mujya bi atA hay chalanya 3 sal chalaya hu
Trabalhando errado sorte que tem um sensor pra parar ali da pra margear na frente da máquina o operador que é ruim assim é muito mais perigoso aqui no Brasil fazemos diferente e que bagunça , trabalho em gráfica desde 2008
Tem.que tá vendo certinho...
Vai sabe qual que é das ideia dessa caixa..
The guys standing are working hard and the ones sitting are moving so slow
Punching yeshe nahi chali jati Bhai Ashe me khatra hai Bhai
machine rate pls
How much for this EUR machine
this machine has safety sensors
No it's only mannaul brake
Pelo amor de Deus não faca isso vem aqui no Brasil ver como trabalhar nessas máquinas.toma cuidado rapazes abraços
Muje. Bi. Sikna. He yhi. Kam bai
Very dangerous, suppose 1 man operate the machine. There are individual slotter machine why not choosing them.
The machine has safety sensors
Ye machin finance krte ho kya
समोर उभारून केलं पाहिजे दोघांनी पण
Dangerous machine! Italian and European cutting machines have a much safer working principle!
I alone feed this machine.
Why do this, you don't have slotting machines in your factory??
The machine has safety sensors
@@ManjitSinghFriendsEngineering Yes sir, I'm sure your diecutter have excellent safety features. I was just curious why this factory uses a diecutter to make an RSC box that requires the making of dies. My guess would be that they don't have a slotting machine.
আমার একটা অটো ডাইকাটিং লোক লাগবে সৌদি আরব জরুরি ভিত্তিতে দিতে পারেন
i need secondhand machine
Good
Y
Bahai kaha huta h yeh kam
Second hand 25 x36 Victoria machine price ?
3-4 lakh
I am rahul Printer's agra 36 46 kya rate hai
Price?
machine prize
cara kerja begini bahaya boss
The MOST UNSAFE WAY OF USING A MACHINE.
Brawo boys
❤🌹🌹🌹💙💙🚛🚛💜
Hy bro
I can make cutting dies that work in this machine
Kisi din pas jayega
bad service dont deal with friends eng
They dont even pickup call and give excuse Evey time
Price??
😱😱😱😱😱😱
Where is OSHA? Ooops, wrong country.
Bhai me ye machine pura chalana janta hu please Bhai job dilado iska
Kg an toàn chúc nào het
They don’t provide service! Don’t waste your time with these unprofessionals!
40 x 56 pris
ஆபத்தானது... இவர்கள்... செய்யும் விதம்... கவனம் தேவை
Danjer machin no sefty
Ow ne
අර කොල්ලගෙ අත කැඩිච්ච වීඩියෝ එකෙන් පස්සෙ බැලුවෙ මොන වගේ මැශිමක්ද කියලා
Hi
In Chile 1 working men 😃
Ну значит два год назад Да они Живи сейчас
Kurwa, 6 osob przy tyglu, ja pierdole hahahaahahahahahahhaqahaha
Kha.ka.hai.bhai.
Ami kaj chai
killer machine
The machine has safety sensors
@@ManjitSinghFriendsEngineering mashine have safety sensors and still I saw one man with no arm in this current generation mashine opretors my grandfather worked on Chander mashine which have over 1500 hundred impression per hour and never have a accident or even look in any danger and this noob opretor is living dangerously on evrey impression
Bhai ye kaha h
Mashu.kaha s li h
🤣🤣🤣...asob kaj aka kora jhai
යකෝ මරනසහතිකයක් නේ
ye badah size hai kyu die cut karna 😂😂
मुझे ओपरेटर चाहिए
Panis yan sa Pinoy mag diecut
Asslam alikum mujhy die zaroorat hi
WTF arriesgando la mano por un cartón
así no se troquela 🚫🚫🚫
I be have ran this type of machine for 20 years and let me tell you this is not how you feed the machine. And why are they scraping each piece individually when you can stack it and use a scraping tool?
Sir this is attitude of some people in my country 😠😡😤
They neither care about workmen safety nor workers listen to owner about safety.
You are right they have not invested in scraping tool. Let me tell you that as auto platen machines are becoming increasingly adopted in bigger more professionally managed packaging houses.
Bobst has manufacturing presence in India as well.
Please share a video of the same if possible
@@OtisAdonisChad The machine has safety sensors
modon 2 na1
Numder movil
🙋🏻♂️ I'll Stack
Vai amak nebe
6
सीट घालणायाच हात बगा
what the f...k man is he doing, wow I cant even watch the video omg !!!!!
Bhai karighar ki jarurat ho bto
Tum Kari gar ho
@@NasirAli-ch8tg mai bhi
Adres bhejna
Die opt..