I just made myself a one-way check valve using only a frixion erasable pen and hot glue. Instructions: 1. Remove the eraser with force 2. Unscrew the pen. The rear section and ink reservoir can be discarded or stored for later usage. 3. Take the spring out 4. place the eraser in, rounded head facing towards the point. 5. Put the spring back in 6. Cover the back with hot glue, and put it on the floor so it would come out straight 7. Poke a large hole in the hot glue 8. Profit. This will allow fluids to go from the point to the other side, but not vice versa.
we use to make these back home in northern ireland when we were young, but we used tin cans so we could use more pressure to add paint and spray it on were you wanted,,thanks for sharing this memories
This could be useful at a protest. When the cops pepper spray you, spray them back! Or if they're wearing a visor, blind them with ink! With this, you can give it more pressure and get more distance than a window/flower sprayer. You can also get spray heads for a broad or narrow focus. Great in countries that don't allow self defence gear.
you should warn your viewers about 1) cutting open spray cans! 2)using your bare hands to cut sharp metal, 3)using epoxies, and then spraying plants, 4)compressed air and a sprite bottle! but i wish you all the best in future videos, hope sprite pays you some money
zdecydowanie lepiej jest wlutowac wentylek do metalowej butelki po sprayu i cisnienie moze wtedy byc wieksze do 1.5 atmosfery czego zwykla butelka nie wytrzyma
Zombie link that's the point. with danger, life isn't worth living. last year at my high-school robotics club, we did an experiment with a shit ton of potassium chlorate and sucrose and lit it on fire. the entire campus filled with smoke and we had to explain to the principal how this was a biology project. best highschool memory.
yes its just a spray bottle, but with this you can pressurise it way past your normal aerosol can pressures. making it useful for degreasing car parts with white spirits :)
a better idea to pressurize your bottle... rather then a bike tyre nozzle, and normal air to pressurize, simply attach the spray nozzle to the lid as shown, than decant a butane gas can into the sprite bottle along with your chosen liquid (LPG BBQ gas bottles work too) than screw the lid on, wait for the bottle to pressurize and the chosen liquid to defreeze, then use like in the above video (reasons why id recommend this over air - softdrink bottles are designed to hold a greater pressure than butane generates(~25PSI) - butane/LPG wont oxidize your liquids like paint or glues so you dont have to worry about the nozzle and straw clogging up - the gas in its liquid form will maintain a constant pressure so you dont have to re-pressurize the bottle continuously and you will effectively have a continuous supply of air and pressure being generated inside the bottle - ITS COOL) (to decant LPG into a mug, tip ur bottle upside down and slowly open the valve trying to catch the liquid that comes out into the ceramic cup, once u have an inch of liquid, simply pour it into the bottle, repeat once more as the stuff you want to spray will evaporate most of the initial LPG as it cools down to -40c) BTW TOTALLY FLAMMABLE as any traditional aerosol can is, so keep away from flames
Adriana Diaz your right but did u know that pump can push more than 50psi and someone who don't know can pop it.. just saying because those bottles pop like glass and sometimes no one think they would need goggles
and i thinked to do that but i had on my mind to use some metal pipe or something (not plastick bottle) and put paint inside (make a paint spray) but i didn't have material to do that. You try to make that if you want. You doing it very well.
with only air is a infinire air dust... genius my friend
I own a spray bottle so....
ETW4life lel
I own a spray bottle. So...
JOKER TV Fuck you! Bitch!
+JOKER TV You are an idiot.
Do you mean spray paint??
First of all i thought he filled Sprite and when he sprayed it on mirror i was like wtf?
x2
it's sick
Shivam Bhatt same
c+black dog y
HowToBasic has been chilling out recently...
نصيحه اللي بيستخدم دي لازم يحط فيها نقطه زيت او مشتقات فيها زيوت عشان مسدس الفونيا بيسرع في عمليه الرش
I just made myself a one-way check valve using only a frixion erasable pen and hot glue. Instructions:
1. Remove the eraser with force
2. Unscrew the pen. The rear section and ink reservoir can be discarded or stored for later usage.
3. Take the spring out
4. place the eraser in, rounded head facing towards the point.
5. Put the spring back in
6. Cover the back with hot glue, and put it on the floor so it would come out straight
7. Poke a large hole in the hot glue
8. Profit. This will allow fluids to go from the point to the other side, but not vice versa.
next step, flame thrower!
That what I through!
noted :)
I made mine stuck in vent.
rastko dragic
hh
Don't use sprite bottle lol
we use to make these back home in northern ireland when we were young, but we used tin cans so we could use more pressure to add paint and spray it on were you wanted,,thanks for sharing this memories
and here I am thinking it was a bong....let down....
Don't worry, I was so confused as to why homemade bongs came up on my recommended.
what is the name of the metal piece the screw thing
Bike pump
When he finally uses 2 part epoxy instead of more hot glue
This could be useful at a protest. When the cops pepper spray you, spray them back! Or if they're wearing a visor, blind them with ink! With this, you can give it more pressure and get more distance than a window/flower sprayer. You can also get spray heads for a broad or narrow focus. Great in countries that don't allow self defence gear.
Its a home made spray can for grafity, mostly tacking, You just gotta use another cap. And a nother top piece to fit better caps.
1:05 no cuts on left hand finger...
1:19 Cuts finger on left hand....
Great Video Bro
nice roman keep up the great work!
you should warn your viewers about
1) cutting open spray cans!
2)using your bare hands to cut sharp metal,
3)using epoxies, and then spraying plants,
4)compressed air and a sprite bottle!
but i wish you all the best in future videos, hope sprite pays you some money
hoy me has asombrado con este vídeo gracias por el aporte y te has ganado un suscriptor mas
esse canal e tão Bom que antes de ver o vídeo eu ja deixo o like ,,,,I like!
Great Video, and a very ingenious set up as well. My hats off to you.
Nice! But it's better when you talk!
It's voiced over by his friend, but that heavy accent is really enjoyable
irolaan oie herooo
wtf is this music please
Fisktryne salilo-sawarem
Fisktryne darude-sandstorm. dead meme?
I knew it wasnt the song he asked for, I just wanted to see what you posted. I laughed right after first note of the song :D :D
Fisktryne
a song
zdecydowanie lepiej jest wlutowac wentylek do metalowej butelki po sprayu i cisnienie moze wtedy byc wieksze do 1.5 atmosfery czego zwykla butelka nie wytrzyma
It can also be used as a pepper spray!!!! Let some hot chili peppers over night and you've got a powerful mixture.
Does it work with paint too?
can we use oil paint....
Empty paint can... You could warm up the paint in warm water it sprays better and youll get more out of a can
Cool idea, what pressure can that bottle withstand?
you can add some lighter fluid and an electric lighter and a wider spray nozzle to make a flame thrower.
Brian Burrous not safe, has a chance of exploding
+Zombie link Chances of explosions make life worth living...
Zombie link that's the point. with danger, life isn't worth living. last year at my high-school robotics club, we did an experiment with a shit ton of potassium chlorate and sucrose and lit it on fire. the entire campus filled with smoke and we had to explain to the principal how this was a biology project. best highschool memory.
Brian Burrous wow
Brian Burrous cool
pressure and carbonation don't go well together. looks awesome and fun. but I'm pretty sure it won't work with carbonation.
It's work with paint too?
very good work keep it up!!!!
MAKE SURE THE CAN IS EMPTY BEFORE YOU OPEN IT AND USE EPOXY OR SOME OTHER TYPE OF VERY STRONG GLUE TO SEAL EVERYTHING
Gambiarra bem criativa, gostei!
Way too much work for just a spray bottle...
reusable spray bottle...
literally down the street you can buy reusable spray bottles in assorted sizes at the dollar store
0in new zealand we pay approx $3 and up for a spray bottle and hows about stopping our waste
its just for fun
peatear42 x
yes its just a spray bottle, but with this you can pressurise it way past your normal aerosol can pressures. making it useful for degreasing car parts with white spirits :)
which glue u used
a better idea to pressurize your bottle... rather then a bike tyre nozzle, and normal air to pressurize, simply attach the spray nozzle to the lid as shown, than decant a butane gas can into the sprite bottle along with your chosen liquid (LPG BBQ gas bottles work too) than screw the lid on, wait for the bottle to pressurize and the chosen liquid to defreeze, then use like in the above video
(reasons why id recommend this over air - softdrink bottles are designed to hold a greater pressure than butane generates(~25PSI) - butane/LPG wont oxidize your liquids like paint or glues so you dont have to worry about the nozzle and straw clogging up - the gas in its liquid form will maintain a constant pressure so you dont have to re-pressurize the bottle continuously and you will effectively have a continuous supply of air and pressure being generated inside the bottle - ITS COOL)
(to decant LPG into a mug, tip ur bottle upside down and slowly open the valve trying to catch the liquid that comes out into the ceramic cup, once u have an inch of liquid, simply pour it into the bottle, repeat once more as the stuff you want to spray will evaporate most of the initial LPG as it cools down to -40c)
BTW TOTALLY FLAMMABLE as any traditional aerosol can is, so keep away from flames
If these are original ideas, you're a genius.
i can see a good application of that idea. nice!!
Most awsome hack! Great job!
This is not safe at all!! The bottler can blow up in your face if u put too much air ... using a compressor
Ahwas Nasir I may be incorrect but it looked like he was using a handheld pump like you'd use for bicycle tires or a basketball!
Only if you are drunk or fool enough
natural process of illimination of IDIOTS Who don't have the common sense
we can use a hydrogen for the bottle or nitrogen.
Adriana Diaz your right but did u know that pump can push more than 50psi and someone who don't know can pop it.. just saying because those bottles pop like glass and sometimes no one think they would need goggles
Nice video, which glue is the black thing on top?
Nice idea,
I love cleaning my windows with sprite, and I love water my plants with it.
great idea! very clever! Thanks for sharing
which glue you used??
and i thinked to do that but i had on my mind to use some metal pipe or something (not plastick bottle) and put paint inside (make a paint spray) but i didn't have material to do that. You try to make that if you want. You doing it very well.
can it be use to spray paint?
As a car guy that was cool!
☺⭐⭐⭐⭐⭐
Marvelous project.
wow wow wow wow!!!! that simple .?? what was the black paste ?
which glue do you use?
mano q ideia louca achei muito top !!!! di like porque valeu apena ver 👍👍
two questions: What exactly did you use for a nozzle? Also what was the epoxy mixture you used to seal it? Would Gorilla Glue epoxy work?
I want to know the material you were using.
great idea man, thanks for the video.
Can you add comments telling us what each part is called. I want to try this at home, but I don't know what I need to buy.
You are a GENIUS!!!!!!
Excellent video
what is the first glue you are using to fix the air inlet valve
another brilliant idea!
Buying a $1 store spray bottle would save you a lot of time and money.
For all those people saying "buy it , it's easier" they don't things like this where I live
you are a genius !
awesome video guys...👉👍
nice job so beautiful
will it work with paint?
With thumbnail, I thought it's a bottle bong
😂😂
this is cool, refillable spray paint!
Now make flame thrower!
What material did you use in this
That is so sick! I love it! :D
this is very good I like it very much 😘😘
in this video you are using a pand press air pump could you tell me how to made this.... i'm waiting please reply.
i'm a big fan of your
here in the US, a sprayer from home depot is
smart,scientists,nice work ,make New inventions
tem que ser sprit mesmo?
Where is Roman from?
Or you can just a spray top on the bottle (the ones used by barbers). no need for gluing or anything
the background music u used are awesomes...so please add link to them also
i need this dude to make me a sprite bottle bong.
the music tho XD
Roman, Which is this music ? Can you or any one name the song name and album ?
Did you got that spray paint from Turkey
cool video love it bro make more
which materiCal u used
Sick dude I gotta try this
Brilliant!
What's the name of that thingy he showed at 0:03? And where the fick would I get it from?
use more fine spray put some alcohol or paint remover and place a lighter ahead of it and press the nozzle.u have a refillable flamethrower
this is amazing , I never seen anything like this, but how many sprays it can last
Do You Guy's know the name of That drill bit at 1:21
Great, I've been looking for a good way to wash my windows with sprite. :)
hey bro. can u share a link of ur background music????? plzzzz???
What i do maybe before ... buy window spray ... use it ... clean it ... fill it with liquid ... use ....
which glue gun do you use?
What kind of screw and glue it is?
i will love to try that😀
Bhai video ke Saath agar explanation deya hota to ye video jayada achha banta.
great !!
Samu Shrestha
Samu Shrestha
oi val
great? fuck you
Very nice.Great idea
Which colour u added