great video, beacsue of you're video and the links you provided I was able to order the paddle shifters and the sterring wheel cover, and i went on the infiniti forum and was able to get rex email, I emailed him and he replied back and sent me a paypal invoice for the cusotm bracket that was needed for my q70, I recieved the bracket and did the entire install today. it worked like a charm and i referneced your video while i was doing my install, so again thank you, this video was a huge help
@@ravipablo2276 there is a post in nicoclub forum that someone did that. It’s not hard you just need an extra wire harness to connect from under dash connection to the steering column.
So I have a 2015 Infiniti Q70L. I already installed the paddle shifters, but they don’t function. Is there some other procedure to make them work or do they need to be programmed?
Pre-order~ Special Handmade Paddle shifter bracket for Y51 (M37,M56,Q70) 1 pc bracket: $110 Mail me : rex931484028@gmail.com *The bracket is suitable for Y51 which doesn’t have stock OEM bracket. *Discount for purchasing more than 5pcs : (Shipping to same address) * International shipping cost is not included
I don’t think he has a website, you have to either contact him through Facebook or email. See the video notes and link to nicoccoclub. He has been mentioned there with I believe the contact.
Great video. I have an FX37 and would like to install this bracket. Do you happen to have any contact for Rex? I found an email on a forum but wasn’t sure if he is still making them or if it was the right email. Thank you
I think so, as long as you have the two wires for the shifters I don’t see why not. Also if you don’t have the wire ports, there is a retrofit wire kit that you can order as part of the bracket package from Rex that make it works with the cars with no wires.
Yes you can depending on the year you own, I think it was 2018 they stopped leaving in the paddle wires. The g37 bracket won't fit these cars either fyi.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
great video, beacsue of you're video and the links you provided I was able to order the paddle shifters and the sterring wheel cover, and i went on the infiniti forum and was able to get rex email, I emailed him and he replied back and sent me a paypal invoice for the cusotm bracket that was needed for my q70, I recieved the bracket and did the entire install today. it worked like a charm and i referneced your video while i was doing my install, so again thank you, this video was a huge help
Glad I could help!
Rex is the man I ordered mines and been driving spirited every since .
How did you get ahold of him??
How did u order it I need a set so I can install mines
@@Noway_itstwinem I sent but RUclips keeps deleting I don't see what I sent you
Great job I might just install those on my q70
They are very nice and shift on demand is even better when you are in D mode!
Can someone tell me how to get to video notes?
amazing video thank you for making it!!!
Thank you!
I just bought a 2011 M37 without paddles, looking forward to doing this mod. Thanks
Hey man, i also recently bought a 2011 m37. Let me know how the install goes!
Bro thankyou so much, great video
I need the same bracket for the shifter for the same car
How would you connect the harness if it isn’t already connected?
@@ravipablo2276 there is a post in nicoclub forum that someone did that. It’s not hard you just need an extra wire harness to connect from under dash connection to the steering column.
Hey good day I need information to buy the shift a bracket I need to see in bracket for the same car
Good job and DIY!
Glad you liked it!
So I have a 2015 Infiniti Q70L. I already installed the paddle shifters, but they don’t function. Is there some other procedure to make them work or do they need to be programmed?
If the wires are hooked, it should work. Not sure why it wouldn’t.
will the m37 bracket fit the m56 version??
I am going to do this, do you happen to know if this voids manufacture warranty?
That’s the million dollar question…..
Can you go non oem ? 🤔
Did you have to have the wires installed? Or it came with the car?
I can’t get ahold of Rex.help me out
Pre-order~
Special Handmade Paddle shifter bracket for Y51 (M37,M56,Q70)
1 pc bracket: $110
Mail me : rex931484028@gmail.com
*The bracket is suitable for Y51 which doesn’t have stock OEM bracket.
*Discount for purchasing more than 5pcs : (Shipping to same address)
* International shipping cost is not included
What is Rex website can’t find it need just the bracket
I don’t think he has a website, you have to either contact him through Facebook or email. See the video notes and link to nicoccoclub. He has been mentioned there with I believe the contact.
rex0926@ms89.url.com.tw
Great video. I have an FX37 and would like to install this bracket. Do you happen to have any contact for Rex? I found an email on a forum but wasn’t sure if he is still making them or if it was the right email.
Thank you
Thanks! I believe email is one of the best ways to contact him.
Thank you, I was able to email and order the bracket!
@@NoahWilson98 did u ever got the bracket
For the fx37
Nice work! How much did all parts cost you?
See the links to the parts in the video notes.
Where can u buy a bracket ?
See the video notes, you can contact him there through nicoclub or go to m/q70 Facebook page and he is a member and can order from him.
Please upload daily
Can I do this to my Q70L 5.6? Thanks...Awesome video.
I think so, as long as you have the two wires for the shifters I don’t see why not. Also if you don’t have the wire ports, there is a retrofit wire kit that you can order as part of the bracket package from Rex that make it works with the cars with no wires.
Yes you can depending on the year you own, I think it was 2018 they stopped leaving in the paddle wires. The g37 bracket won't fit these cars either fyi.
Nice vid man, let's anyone who hasn't pulled these open what they're looking at getting into. Already put paddles on my M56x a while ago.
Does it require any system reset or software upgrade after installation?
Yes, I just did it to my m56 which has no difference in many cases.