Tatra 813 Kolos 8x8 - Cross RC DC8 - presentation RC scale truck
HTML-код
- Опубликовано: 7 окт 2024
- A short presentation of the external appearance of the model, driving videos will soon appear on my channel. This is a 1/11 scale model of the Czech Tatra 813 Kolos 8x8 truck (although the manufacturer of the model declares a scale of 1/12). The model was built from the Cross RC DC8 kit, which I bought in the Belgian MCM Racing shop:www.mcmracing....
Including all the breaks, and there were a lot of them, it took me about 8 months to assemble the model.
The inspiration for such painting of the model was a photo of a real truck from the article: www.nztrucking...
Tara trucks have a characteristic structure - a central load carrying backbone tube, independent swinging half-axles. They had been produced since 1967 to 1982. The Tatra 813 can tow trailers with a total weight of up to 100 tons. A noticeable characteristic of Tatra trucks is also the fact that the wheels of the unladen vehicle are arranged in the shape of the letter "V".
I also put on the model elements that are not available in the kit from the Cross RC manufacturer: winch, reversing light, front marker lights, three additional headlights in the front (one on the roof, two under the front windows), two warning lights on the roof, I added the rear direction indicators in half of the rear lamps.
Of course, I also modified the electrics, among other things, I separated the main headlights of the model into separately activated low beam and high beam. My wiring diagram is available at the link: drive.google.c...
The original front suspension seemed too firm to me, so I replaced the springs of the auxiliary telescopic shock absorbers.
A video with the stages of building the model can be viewed at the following link: • Tatra 813 Kolos 8x8 - ...
-------------------------------------------------------------------------------
Technical data and used parts:
Length: 784 mm,
Width: 256 mm (with mirrors),
Height: 253 mm,
Weight: 10,7 kg/23,6 LB. (with Lipo 3S)
Engine: Hobbywing QuicRun Fusion 540 1800kV Combo FOC 2-in-1 (brushless), integrated ESC 40/160A,
Two-speed gearbox Cross RC, 12T rack on the motor shaft,
Battery: Lipo 3S 11,1 V,
ESC: integrated with the engine,
Transmitter: Radiolink RC6GS V2,
Receiver: Radiolink R7FG v1.3,
Steering servo: two DS3235SG 180 ° 35 kg (Coreless Digital Servo) operates at 8.4 volts (from Cross RC 10A UBEC),
Servo gears: DS3225SG 180 ° 25 kg (Coreless Digital Servo),
Light module: Cross Rc LC3 + Das Mikro TBS Mini,
Sound module: Das Mikro TBS Mini, 8Ohm 3W speaker.
Varnish: Granit Quality Parts RAL 1028 + Boll clear varnish VHS (both two-component) + spray Deco Color Megafelga RAL9005.
The cables at the lamps and the rear lamps have been taped with black silicone.
Winch: worm gear motor JGY-370 12V 18 RPM, winch controlled by a small single-channel receiver and remote control for rc winches.
Materials for the Das Mikro TBS Mini module:
drive.google.c...
My other projects can also be viewed on Flickr:
www.flickr.com...
__________________________________________________
Camera: GoPro Hero 8 Black
Video processing program: Open Shot Video Editor
#crossrc #offroad #rc #truck #rcmodel #tatra #tatra813 #crossrcdc8
very very nice TATRA big thumb big like
Thank you for your appreciation 😊
Epicka Tatra, po prostu, niesamowity model z takimi szczegółami, że szczęka opada.
Dzięki za wstawkę, miło nacieszyć oko takim poziomem szczegółów, Fajne nagrane
Miło czytać taki komentarz, dziękuję bardzo 😊
amazing truck, thanks for showing it !
Thank you for your words of appreciation 🙂
Wow, a very nice model ! Probably one of the best T-813 8x8 I’ve seen so far.
Level of detail is astonishing in some areas, but not so much in other areas. For example, the tool boxes behind the cab are too wide and too tall, thus not in the right proportion with the rest of the truck and the doors do not open the right way. On top of the one on the passenger side should be a small cylindrical fuel tank (cab heater fuel tank). In between the two should be another box mounted a bit higher (the cab air filtration unit).
The detail around the windshield needs some more finesse. And oh, the front grille panels and hinges should not be mounted flash with the framing but with a bit of an ingress.
Good job, but if you’re into high detailed scale modeling you still have lots of work to do !
Yellow is ok, but the factory olive drab color looks allot better on these trucks !
@hereintranzit Thank you for your extensive comment and tips, perhaps one day if I find the time I will make some of the changes you mention.
The color is a matter of taste, I don't really like the olive color and that's why I chose the yellow painting, also based on the real one, as I mentioned in the description of the video.
Piękna maszyna!
I te detale, coś wspaniałego!
Dziękuję 😉
@@kolekcjoner205-models
Nie ma za co.
Yeah, Cross RC produces some REALLY nice, detailed trucks that are 2nd to none! I have 3 of their trucks myself.
That's right, they make very detailed trucks. Thank you for your comment.
Fantastic presentation and the best example of the DC8 that I've seen so far. I know you worked on it for a significant amount of time but the results are well worth the effort.
Thank you 😊
Wow so many nice details it is awesome
🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
Nice to read my friend, thank you 😀Greetings from Poland to Guatemala!
Excellent shot. 👍
Is a Fantastic Scale Truck and a awesome RC!!!
💪🏻🏆🎖 Congrats for a very naice Build
Thank you 😊 I admit that there were times when I had enough of this building, but the end result makes up for everything 😁
@@kolekcjoner205-models Indeed my Friend! In the end you have a awesome RC Truck
Hello,
Looks very cool!👍🤩💯Very Nice work from you!👍
Greetings Seven🖖
Hello!
Thank you Seven, have a nice evening! 🖖
@@kolekcjoner205-models Thank you too!🍀
Awesome..great looking RC Truck..😮😍
Thank you, have a nice day! 😊
Ganz toll 👍. Durfte diesen Tatra 813 8x8 bei der NVA mal fahren.
Danke 😉🍻🖖
Świetna maszyna ci wyszła, Cross RC robi naprawde świetne modele🙂
Dziękuję, dobrze opracowany model to podstawa 😉
Super built 👍🏻
Thank you 😀
Top schöner Tatra
Vielen Dank 😉
very good work ; he looks very good🍻👌
Thank you 😉
Have a nice evening! 🍻
Very nice, like ! ! !
❤👍😃
Thank you 😀
What does this fan do? I'm very curious. Cools the ESC/motor.
Yes, this fan cools the engine and the ESC built into it as well as the steering servos. Cooling is only useful when driving in second gear for a long time or when driving fast.
@@kolekcjoner205-models And is it default equipment of this model, or it is mod which you added?
@@dubik3e This fan is the default equipment from the set, I just added a switch.
U tech modelu jde sakra na detaili ale ne kazdej je taky udělá
That's right, thank you for your comment 😉
You need to add driver😅
It will definitely appear someday 😁