Simple as that.Very good video.We wait for more.I was afraid of Monaco and Vediamo as not many videos on YT show how-to. Thanks. PS.Any videos for 722.9 and ECU flash etc... pls :) Simples
What physical connection are you using to connect to the OBD2 port? Laptop, C4/C5 or other? I cannot get to connect with ethernet cable where you are at about 1:45
In S W222, the ECU is BC_F222. The code is VCD_OLC_BLINKER_MODEL and the parameter, Pbmm_anz_tb. Originally it put "3", and you can choose, for example, "5"; it's best because you have more time.
Do you know how to code the tail lights of W222 from US to EU with vediamo ? Is it SAMR_321.CBF that I have to use or BC_R222.CBF or any other? Any help is welcome ! Thanks a lot in front !
@@nsarov The reply is above "in S W222, the ECU is BC_F222. The code is VCD_OLC_BLINKER_MODEL and the parameter, Pbmm_anz_tb. Originally it put "3", and you can choose, for example, "5"; it's best because you have more time." So use BC_F222. So simple at least in my car.
Hello from Spain... First of all, thanks for your job. When yo go to "download folder" after coding and before hard reset, does it mean you must have internet connection? I´m using chinese Openport, so I can´t have Internet. Thanks in advance.
Bro, will this work for my GLK350 - US version? Also, do you have a video (or can you make one) on how to program it to enable the amber turn signal for 2nd generation GLK's. Currently, we only have red brake/turn signals. Amber turn signal is disabled. The pin is there, just disabled.
Hello could you help me please i need to add arabic language to insturment for mb truck Mercedes mp4 they told me it is possible via vediamo so could you help me please
Hello, I have a W204 automatic transmission vehicle. There was a problem installing the program on this vehicle and my car does not start. I also have the MB C6 original diagnostic device, but I do not know how to use this device. Can you help me with scn or coding? I don't know how to use via vendiamo, please support me via remote connection by setting an appointment, thank you very much.
Merci encore une fois 😍
Simple as that.Very good video.We wait for more.I was afraid of Monaco and Vediamo as not many videos on YT show how-to. Thanks. PS.Any videos for 722.9 and ECU flash etc... pls :) Simples
Going to try this 👌 You should do short video showing the function on the car also if you like that think many here would see it 🙏
Will try to do from the next video :).
Go for it 🤘
Great
Grazie 1000. Bel video interessantissimo. Per caso sai come entrare su ECU della W246 del 2016 per abilitare ribaltamento specchi e luci soffuse?
thanks
What physical connection are you using to connect to the OBD2 port? Laptop, C4/C5 or other? I cannot get to connect with ethernet cable where you are at about 1:45
In S W222, the ECU is BC_F222. The code is VCD_OLC_BLINKER_MODEL and the parameter, Pbmm_anz_tb. Originally it put "3", and you can choose, for example, "5"; it's best because you have more time.
Do you know how to code the tail lights of W222 from US to EU with vediamo ? Is it SAMR_321.CBF that I have to use or BC_R222.CBF or any other? Any help is welcome ! Thanks a lot in front !
@@nsarov The reply is above "in S W222, the ECU is BC_F222. The code is VCD_OLC_BLINKER_MODEL and the parameter, Pbmm_anz_tb. Originally it put "3", and you can choose, for example, "5"; it's best because you have more time." So use BC_F222. So simple at least in my car.
😃😃😃😃😃Thanks for the quick answer mate! Very helpful. Sorry for not paying atention in details ! 😃😃😃😃😃@@LaEconomiaNoEsUnChiste
In my 2015 MB GL550 ambient lights are not bright enough I even have them turned up to level 5
Is there way to make them brighter by coding
Hello from Spain... First of all, thanks for your job. When yo go to "download folder" after coding and before hard reset, does it mean you must have internet connection? I´m using chinese Openport, so I can´t have Internet. Thanks in advance.
hi can you do the same for w211 2009? what cbf file is needed for this?
My friend, please make a video explaining how the night vision software works, either offline or online, if you please
Does anybody know how to code out EML after decat exhaust is installed on 2014 a45 AMG W176 ?
Wonder if this software would work to activate the dashcam on Mercedes! Are you 🇩🇿 by any chance?
Hi, Do you know what cbf file is it for the w205?
This work on w209/2003 ?
Se puede realizar en un mercedes w164?? Saludos.
Hi
I can't activate in my wagon w211 2003 !
if you can help me
thanks
Bro, will this work for my GLK350 - US version? Also, do you have a video (or can you make one) on how to program it to enable the amber turn signal for 2nd generation GLK's. Currently, we only have red brake/turn signals. Amber turn signal is disabled. The pin is there, just disabled.
Have to check. wa.me/+353892384791
If I need training??
Is the same true for the w203 c class?
Procedure should be same, you can check it.
When i follow you by step it work but when i restart engine it back to bink 3 times again.
I have done that Thank you.
Hey, i cant open the Vediamodata folder becouse more than 500 ECU's....... Can i use a specific folder??
The error says why you cant open. So split the cbf into two or more folders
@@MercGARAGE 😍 thx, Best Regards from Vienna 👍👍
Привет! Как с тобой можно связаться у меня к тебе есть пару вопросов?
Hello could you help me please i need to add arabic language to insturment for mb truck Mercedes mp4 they told me it is possible via vediamo so could you help me please
wa.me/message/QVO6IPAYMCV3M1
한국분이세요?
Hi
Hello, I have a W204 automatic transmission vehicle. There was a problem installing the program on this vehicle and my car does not start. I also have the MB C6 original diagnostic device, but I do not know how to use this device. Can you help me with scn or coding? I don't know how to use via vendiamo, please support me via remote connection by setting an appointment, thank you very much.
Please contact via whatsapp
How if ican canceld preeseef?? 212
Sorry i didn't get you.
@@MercGARAGE ok thank you
I have a message on the tableau watches PRESAV
@@hassanabd679 😳 you have a message... i didnt get the rest.
Please need help with openport : unable to communicate with ecu.
Thanks
Please contact via WhatsApp or Email
What is you WhatsApp number?
@@hocinechentouf8231 Please check the channel all contact details are there.
Do you have skype
wa.me/+353892384791