Kumpulan ide yang sangat luar biasa kreatif bro.. banyak yang mudah saya tiru dirumah. Sangat bermanfaat sekali bisa membuka fikiran2 baru. Semoga chanelnya makin berkembang besar, Sehat terus bro, supaya bisa berbagi ilmu kreatif lainnya. Sukses selalu, rezeki berlimpah dan panjang umur sekeluarganya. Amin..
Expensive tools are really ideal, they can't be replaced by these good tricks, and they last for years. Management is needed for these tricks, those who dig the earth all day, couldn't do these tricks, because hard work pumps up the brain, and the worker can only concentrate on the shovel. These ideas are handy, one profession only needs some.
Some of these are 5 minute craft level - 'honey, there's a bit of toothpaste left in the tube, pass me my goggles, gloves, grinder, metal rod and my drill' 🤣 Wife: *roles it up with her hands like a normal person* Whoever is commenting 'genius' please don't try DIY, it's not for you
Making the wood rasp/plane from the hacksaw blades is making a simplified yet not as effective homemade version of a Shinto plane/rasp without as many blades or a handle that can be istalled and removed as needed. I had one and it was the best rasp or plane I have ever used and have been thinking about buiding another one with a few more blades like the real ones have and in different coursenesses since I dont know where to get double sided hacksaw blades with course on one side and fine on the other side.
This is the first video out of many that actually has tips & tricks that are useful and practical in making your work easier. I was amazed at the number of USEFUL ideas this video contains. Thank You.
dont use that, its a terrible way to connect 2 wires!! its used to cap off the end of a wire to put into a connection. If used like this you will have a live connection to the outside of the wire
If you do not know how to solder, try using self soldering heat shrink, it won't leave an exposed conducive surface, and can quickly and easily connect two wires.
cái hay của phúc đó giọng hất rất tình cảm , mỗi bài hát là bạn ấy thả hết tâm hồn và tình cảm vậy , và thể hết giống như mình đã từng trải nghiệm , i love you
@7:02 are you saying wire couplers will attach two wires together?? @10:26 that nails can be used to attach two boards together?? And @12:12 that drill bits can make holes in wood?? Woah!! Those are game changers!! I don't know how you figured that out....
the nail without a head can literally just be removed with a crow bar or hammer instead of going back and forth to remove it just go side to side no need for an extra tool
![ROSÉ(로제) - APT. (Band VER.) (With. 이영지) [더 시즌즈-이영지의 레인보우] | KBS 241129 방송](http://i.ytimg.com/vi/IW8qaemx74g/mqdefault.jpg)
Good idea, thanks sharing
Прищепка для забивания гвоздя-это для полных чайников🦧
я тож тока до этого досмотрел и все понял))
Genius.. i opened the vid only for that cover photo :) nice clickbait :) gg
wdym? It's there at 4:36 but slightly different ;)
That Citronela wick would work for maybe half a second on that grinder head if lit before it flew apart. Funny pic.
Обалдеть! Вот у вас мозги работают! Сразу видно - творческий человек!
Да что же у человека за трудности с гвоздями? Еще немного и будут гайды как забивать гвозди молотком
Ты что не видишь ? У него со всем трудности .... Самая главная из которых - ему заняться нечем
That masking tape pour spout over the paint can is the best. I'll start doing that.
And the drywall screws in the paint brush, genius. Lol Have a great day. 😋
Có cái gì hay hơn ko......
The first one was a great idea
Kumpulan ide yang sangat luar biasa kreatif bro.. banyak yang mudah saya tiru dirumah. Sangat bermanfaat sekali bisa membuka fikiran2 baru.
Semoga chanelnya makin berkembang besar,
Sehat terus bro, supaya bisa berbagi ilmu kreatif lainnya. Sukses selalu, rezeki berlimpah dan panjang umur sekeluarganya. Amin..
Solving problems no one ever had. Brilliant.
2:59
Mr inventor deberías inventar algo para el hueco de tu guante, el cual está justamente en tu pulgar 😂😂👍
Sukses mantap pokoknya
brillient nice...
Terimakasih telah berbagi trik sangat bermamfaat ..
OH I can't WAIT to see the spinning mosquito coil
These are helpful for people who don't understand tools
Merci pour toutes ces merveilleuses idées. J'enregistre ce site aussitôt.
@ 1:06 run the drill in reverse instead. If you put the pliers between the bit and the screw against the wood it will come off no problem.
Merhaba çok faydalı bir paylaşım olmuş. Emeğinize sağlık. Teşekkrürler. 👍🏼
@7:29 how did the plastic bottle lift up ?
Best one, copper wound around lag bolt for a threaded insert. Worst one, three drill bits taped together for one big bit! Overall, Mcgrubariffic
there might be times when you need a bigger hole but dont have the right bit
@@utubeape good point!
Very creativity the videos.. good luck and good job i'm From INDONESIA
Струбцина из пластиковой трубы это гениально😅
To the person reading this:Even though i don't know you,I wish you the best of what life has to offer 💟💟💟
фф
Amazing
Same to you!
@@clickortap6401 ccc
I love you too
Tips mempersulit diri 🤗
While some of these are good still think its bullshit about the click bait thumb nail. 👎
BINULOK manang inyoha tawon oi ..
Muy utiles practicas experiencias manuales
Expensive tools are really ideal, they can't be replaced by these good tricks, and they last for years. Management is needed for these tricks, those who dig the earth all day, couldn't do these tricks, because hard work pumps up the brain, and the worker can only concentrate on the shovel. These ideas are handy, one profession only needs some.
Show 👏🏻👏🏻👏🏻👏🏻 amo seu canal 🌻🌻🌻🌻🌻🌻🌻🌻🌻🌻🌻🌻
1qwerty
Amazing tool workarounds from our East European bros!
Coming to USSA soon!
Thanks for sharing. Loved the innovation. Very creative.
wtf is USSA?
Greetings from Algeria
I'm shocked, this video actually has some interesting ideas.
Really amazing
Great vid
А вот крышечку от баллончика краски можно применять для сверления отверстий в бетонном потолке.
Может и удобно , но всегда ли при сверлении бетонного потолка у Тебя под рукой крышечка от балончика ? Тогда уж дно от ПЭТ , этого добра везде кучи.
Drill in tilgis bette if you just put tape under then drill a hole. Then u dont slip with the drill heat.
Wile you are at look up center punch and what it is used for
Mantap ilmunya...mkch...
These are actual real useful life/DIY hacks! Unlike those other channels that promote fake and dangerous hack’s that never work.
Над струпциной из канализационной трубы я угарнул, конечно, аж смотреть дальше не стал
А зря, дальше ещё веселее
Гвозди этот парень любит забивать !!
Досмотри , там ещё ржака есть 😆
Some of these are 5 minute craft level - 'honey, there's a bit of toothpaste left in the tube, pass me my goggles, gloves, grinder, metal rod and my drill' 🤣
Wife: *roles it up with her hands like a normal person*
Whoever is commenting 'genius' please don't try DIY, it's not for you
Good Thanks ! 5:04 need to extend and bend the wire to maintain the center of gravity.
Good thebes
Very Inventive Mr. Inventor!
4:50 what is that? I dont understand...
Насколько нужно быть гениальным, чтобы тратить своё время в пустую.
Как Вы правы), недосмотрел.
@@Иван-е7щ6ц я тоже не осилил до конца это смотреть 😆
Making the wood rasp/plane from the hacksaw blades is making a simplified yet not as effective homemade version of a Shinto plane/rasp without as many blades or a handle that can be istalled and removed as needed. I had one and it was the best rasp or plane I have ever used and have been thinking about buiding another one with a few more blades like the real ones have and in different coursenesses since I dont know where to get double sided hacksaw blades with course on one side and fine on the other side.
Lgl
Usually these types of vids suck but this one had some really creative and good ideas in it
That's why the title does not contain 'life hacks' xD
@@elmariachi5133 oh.
Зачем ключом заворачивать крючок)если можно вторым крючком заворачивать крючок)
Это для последнего крючка, которым остальные уже закручены 🙂
tape multiple drill bits together to make a bigger hole. probably never need to, but ... interesting
What a level....
This is the first video out of many that actually has tips & tricks that are useful and practical in making your work easier. I was amazed at the number of USEFUL ideas this video contains. Thank You.
Tell me a least one of them🤔
@@Евгений-ч3с9э Its sarcasm
Контакты для совместной работы на RUclips, ответ на сообщения Instagram
Awalnya aja yg bagus, ujung2nya kayak sesuatu yg simpel di ribet2kan
Trik trik yang menarik dalam kehidupan sehari hari
Good
I would say, cute ideas though.
Это на сколько нужно быть криворуким чтоб гвоздь пальцами не удержать?
Либо использовать пассатижи, если гвоздики мелкие.
This is what 5 minute crafts should aspire to be
This is my favorite & I've watched a whole lot of these and by far you win! Ty
the toothpaste one ..yesss lol
genius idea, really interesting
Trick good...
👏👏👏👏👏👏👏👏👏 super
Anybody using older style holesaws, putting a little cable between the arbour and holesaw will prevent the two pieces of metal binding together
And next how to make a chocolate fireguard
Pocas palabras , Felicitaciones , Mucha Salud .
jaja. empezó bien, después se fue al carajo la parte practica de las cosas. igual hubo varias cosas ingeniosas. Me gustó
All ready been done you watch to much you tube
the bolt hanging inside the box looked like a tweaker trap until the painting began
I thought this was clickbait trash but they are actually really useful
on the radiator you could just use a towel. its not that much water.
0:18 thats all fine and dandy but I literally watched 2 small screws get sucked into the vacuum through the straws
4:03... you really gonna claim that one buddy?
Can you tell me what’s the name of the thing you use in minute 7:04 to connect wires together? Please. I appreciate all you share
dont use that, its a terrible way to connect 2 wires!! its used to cap off the end of a wire to put into a connection. If used like this you will have a live connection to the outside of the wire
If you do not know how to solder, try using self soldering heat shrink, it won't leave an exposed conducive surface, and can quickly and easily connect two wires.
Don't do that.
cái hay của phúc đó giọng hất rất tình cảm , mỗi bài hát là bạn ấy thả hết tâm hồn và tình cảm vậy , và thể hết giống như mình đã từng trải nghiệm , i love you
I had to smile at the paint brush, Santa. Some very cool and easy ideas here. Now if I could only remember them when I need to use one.
Excelente video compañero te felicito
I like the idea, with, the straws and vacuum; pure genius gump pure damn genius
The thumbnail got me broo
That spiral angle grinder us just a horrible workplace accident waiting to happen
Divudeo ini beberapa adegan serasa dipersulit dan tidak terlalu berguna
@7:02 are you saying wire couplers will attach two wires together??
@10:26 that nails can be used to attach two boards together??
And @12:12 that drill bits can make holes in wood??
Woah!! Those are game changers!!
I don't know how you figured that out....
Ingenious Tips👍👍
5:25 cortador de ramas con segueta
8:47 Pelador de alambres
excellent
Very good👌😉
Where is the angle grinder and mosquito coil?
4:36
Geese mr your even higher than I am !
Рулетка гвоздь опять 🤣автор не равнодушен к гвоздям 🤣🤣🤣
Very smart man.
Sangat luar biasa
Gostei da sua idéia.
Him: it's home made
His friends: We know
I love your channel, I’m your fan
Крутые лайфхаки - как потратить время впустую
3:32 do we really need a paper clipper if there's a hole in a box at the top? Can someone explain it to me cuz i don't get it.
Show ! 🙌👏👍
Very Good.😊🌟
the nail without a head can literally just be removed with a crow bar or hammer instead of going back and forth to remove it just go side to side no need for an extra tool