Over Load Truck Real Axle Breaks Down On The Middle Of The Road || How To Repair Axle On The Road

Over Load Truck Real Axle Breaks Down On The Middle Of The Road || How To Repair Axle On The Road
Here's a step-by-step guide on how to repair a broken axle on the road:
Safety first
Gather tools and materials
1. Axle repair kit (if available)
2. Welding equipment (if possible)
3. Spare axle or axle shaft
4. Tools (e.g., socket set, wrenches, pliers)
5. Jack and jack stands
Repair steps
1. Raise the truck: Use a jack to lift the truck and remove the wheel on the broken axle side.
2. Remove the broken axle: Use tools to remove the axle nut and pull out the broken axle.
3. Inspect and clean the area: Clean the area around the axle mounting points and inspect for any damage.
4. Install the new axle: Insert the new axle or axle shaft and secure it with the axle nut.
5. Tighten the axle nut: Use a torque wrench to tighten the axle nut to the recommended specification.
6. Reinstall the wheel: Put the wheel back on and tighten the lug nuts.
7. Lower the truck: Carefully lower the truck to the ground using the jack stands.
Additional tips
1. Call a tow truck if you're not comfortable with the repair.
2. Use a temporary fix (e.g., welding) to get the truck to a repair shop if possible.
3. Always follow proper safety procedures when working under the truck.
Remember, this is a temporary fix to get you back on the road. It's recommended to have a professional mechanic inspect and repair the axle properly as soon as possible.
‪@trucksofpakistan‬
‪@pakistanitruck‬
‪@DiscoveringSkills‬
‪@pkamazingskills1867‬
‪@restorationking4085‬
‪@pkrestoration1461‬
#amazing
#accidenttruck
#how
#howto
#repairing
#truck

[@khuramkashmiri1029]

Good work khniiii

[@MAKINGWORLD-1020]

Thanks 🔥

[@raynal-RDIABLO]

The best technicians on earth!

[@syedali6828]

MashaAllh 🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳

[@MAKINGWORLD-1020]

Thanks

[@ahmadmehmood140]

Kya baat ha

[@MrDen28rus]

Вот бы мне так в себя верить, как эти ребята верят в свои домкраты.

[@Fatboy20082008]

Чулок не будет держаться на сварке, проверено. Даже на камазе не держится. А здесь судя по всему грузоподъёмность автомобиля посерьёзнее камаза

[@KhanaLiaqat]

Niccc

[@MAKINGWORLD-1020]

Thanks all

[@demodemos]

hij ziet er nog nieuw uit die truck ,en nu al kapot .

[@fasttruckman]

Is repair work so cheap in Pakistan that Pakistani truck owners find it more profitable to overload their trucks and just fix whatever breaks from overloading their trucks.

[@elroysuggen9821]

Why do you keep packing the wheel bearings with grease, they are supposed to be lubricated with the gear oil.

[@hasse8181]

Reperation

[@SamiKhan-lk2bw]

Hhhh😂 ye chashme Wala men hon 😂😂😂

[@MAKINGWORLD-1020]

Good work bro

[@mrajinj661]

Do you welders know that pushing your weld is weak? You always drag a weld.

[@MAKINGWORLD-1020]

I try my best to

[@HoeSweeChoong]

Go in Co Co HBO Co CT see see if no no no to win j​@@MAKINGWORLD-1020