Watched this one again, as it is a very good one. You said somethig about getting a face showered with glass, this happened to me many moons ago. You see, my father was what you could call a conosour of Vodka, and drank up to a fifth a day of the clear gold. Back then things being as they were, all garbage was to be burned before the truck collected the ash, thus saving space in the dump and the truck. It was my chore, then a boy of 9 to carry out the garbage, and burn same each day, but garbage collection day. I used to really enjoy watching that fire, perhaps I was a fire bug in the making, however when one of dad's empty bottles exploded from the heat, throwing molten glass into my face and thankfully into my glasses, I quickly gave up the joy of watching fires, and began to dispare at taking out the garbage. The scars are still with me nearly 60 years latter but in the process of aging, have become quite hard to find.
In future versions of this floodlight, please remember to leave the earth wire to be the longest wire. The reason being, if the whole mains wire gets pulled out, the earth wire gets pulled out last. Just a small extra safety measure. Other than that, a great build, especially as you included a earth wire. Many people would leave that out because earthed cable costs more.
I think a lot of people on youtube try too hard to be impressive in some way or another, and it rarely ends up working out. The nicest things about your vids are the down to earth attitude, practical advice, a bit of fun and humor... it just never feels like a waste of time to watch. The pace is just right. Not too slow (ugh), not too fast where critical info is skipped (ughhh). Come to think of it, some people who shall remain nameless often say things like: "I'm not going to explain how this works because it's complicated/would take too long" - or something to that effect. Sorry but, it takes seconds to cover the basics of something in a general way, if you actually know what you're talking about. Better than leaving a big gap for the inexperienced viewers to have to fill in somehow. ANYHOW. I hope you realize how many people love you, whether they admit it or not haha. :D
wow 37 minutes and all i can remember is Rice, white wine like substance and chocolates with pink leds. I l also love how your not bothered about leaving the camera running while you quickly go away to grab something rather than editing that out. You have an amazing calming voice, just love listening to your videos/
It was great to see you take this all the way from an idea to an actual assembled unit. Good commentary as well, I really learned something from this. I think you would make a great college teacher!
Love your technique for holding the board and solder in one hand. You make it look so natural and easy. When I have to do it I’m about as graceful as a baby deer trying to walk for the first time. If you’ve never seen that it’s quite amusing but kind of pitiful at the same time.
Thanks BC for another great vid! Handy tip: If you make and install a bunch of these floods around your house, you wont need rose colored glasses to look at the world anymore! This is an excellent video from circuit design to layout to board manufacturer to final test showing all of the steps necessary, and good explanations of the reasoning why at each step...with amusing Cliveisms interspersed "...white wine-like substance for peasants...". Great stuff!
Great job. I loved seeing the end-to-end on the whole project and seeing the PCB being actually developed. I hadn't even thought it was realistic to do that on a hobbyist level before now.
I was 40 years back in time when you were drilling the holes in the pw, thanks for the video and your way of doing it all, you are so relaxing and funny at the same time.
Clive, I love how you are obviously knowledgeable about this stuff but it still find it cool to take stuff apart, explore and even improve things! Getting lost in the task is part of the fun! Best Regards!
great work, Clive! thanks for sharing it with us. One day soon, I'd like to build my own modestly bright, appropriately coloured wash light. since you mentioned detonation: I saw recently that the Isle of Man had a small incident with some unexploded WW2 ordnance. That looks like it was rather exciting.
Liked the project. Long videos are great! The comments about the over blown reaction to lead solder are so true. I'm an electrician too and liked the supermarket story. I work in a hospital, and have gotten zapped in odd locations. An operating room was memorable.
Thanks for the video Clive, I quite enjoyed it. In regards to industry going lead free solder, it wasn't so much to protect workers from lead fumes, but to protect children and the environment near waste disposal sites who end up with lead flavoured drinking water when huge amounts of electronics are dumped.
+Audio Joe Clive's videos are oddly very soothing--almost zen-like! I usually tell myself I'll only watch one or two in the evening, and then I get caught up re-watching earlier installments.
It's been a long time since I etched a circuit board, though a little less than a long time since I soldered anything, but I think I could make this without too much problem. I enjoyed this a lot and there is much to be said for the experience of watching something being made, (probably more so if making it myself), especially when accompanied by Clive's dulcet tones.
to hell with it ... I learned more from you then I ever had during my 5 years of study ... I'm not saying my teachers are to blame... but you just make it far more fun with visualization of what are you working on. Anyway ... if you ever get around to read this :) ... I salute you and send a BIG thank you.
Very neat repurposing project, it'd be fun to see the superflux one too... :) And a possible idea for other videos, Clive's storytime, just talking about things you've done that ended with hilarity, embarrassment or otherwise, that supermarket story was quite a good one... :D
HELL yeah, Xuron! :D I LOVE mine. I use the cutters and a set of their pliers almost every single day. They have been nothing short of amazing in terms of quality and longevity.
I have a pair of 25+ year old xeron 170's I stole from my dad as a boy. They're great snips but, they look like these have lead the life of a pair of tin snips. One blade has the end missing and there is about 4mm of viable cutting surface but, still the best damn snips my dad ever bought!
Great project, love your vids! Lead soldier can be toxic if used in plumbing as it leaches into the water, that was my understanding to why there was a big push for its ban
That hand-drilling routine brings back memories, but these days I wouldn't give up my mini CNC mill for anything - engrave the traces, drill the holes, route out the board all in one... :)
Using some SMD resistors and an SMD bridge rectifier, you could probably squish another row of LEDs in there. Also if you're worried about the isolation, you could use some nylon screws instead, and have nylon (eh, almost any plastic will do) spacers as well, to keep the board off of the back of the housing.
I've been soldering for 56 years and no lead poisoning, yet, AFAIK. BTW you are correct to consider the voltage rating of resistors. I've seen many failures of lower voltage resistors connected across 350v DC. I prefer the 0.75 Watt/350v resistors sold by Farnell.
Glad to see you consuming sustenance and an adult beverage during construction and design. Must keep that energy level up, keep those neurons perking! Great vid, as usual.
Your Supermarket Story reminded me of a Job during my Apprentice Time :) I worked in a Supermarket where they put Mains Voltage on the Metalgrid of the Hung Ceiling, apparently to get rid of Rats :D The Store was closed so there weren't many people around. But it kicked me off the Ladder, and I couldn't stop yelling when I found out why I got a Shock.
I wish it would have been that. The Ceiling wasn't grounded, but there was a Junction Box with a Single Brown Wire coming out, and attached to the Grid with one of those Fork Cable Lugs and a Self Tapping Screw.
Thanks Clive. Nice build. I've always enjoyed using this mnemonic I came up with whilst trying to remember resistor colour codes. 'B'ad 'B'oys 'R'ape 'O'ur 'Y'oung 'G'irls 'B'ut 'V'iolet 'G'ives 'W'illingly without a 'S'econd 'G'uess.
I bought an outdoor floor that runs on 12 V ac or DC. I bought a real outdoor transformer and so far it has been working for 5 years! The leds last forever but the supply lasts a year or two.
Great vid! Very interesting to see circuit design and repurposing. Glad to see from the comments below that you're planning on doing some more vids like these. I'll be watching them all with a tin of cheap aussie lager in hand. Keep it up
Shouldn't the earth wire be longer than L and N so it will be the last wire to get disconnected I case the cable gets 'pulled' too much. Nice lamp. I can just listen to you for hours. It's wery therapeutic.
On RoHS: “RoHS and other efforts to reduce hazardous materials in electronics are motivated in part to address the global issue of consumer electronics *waste*.” Lead has been shown to have extremely negative effects as a pollutant: cognitive difficulties etc.. Waste incineration (possibly with energy recovery) springs to mind as a risk where discarded electronics are not separated from general household waste. With that said, the best way of reducing the hazards of e-waste would be to create less of it: Right To Repair and mandatory MTBF requirements at minimum, and ideally, an attempt to combat psychological behavioural manipulation (or "influence" if you prefer) by advertisers intended to promote excessive and wasteful consumption.
+khachaturian at least he's smart enough to mix it with chocolate! Never seen that brand here in the states. I like the Andes mints and the anything swiss chocolate. Russel Stover is the poor man's Godiva over here.
bigclive, My first soldering iron was one that you had to heat on the gas cooker, lrg head 1/2" by 1/2" X 2" with 6" long bar and handle. very early 70's couldn't afford a expensive electric one. I made some good things with that, mind you boards were bigger!
Really great video. Learnt a lot and, as always, very relaxing listening to your narration. I think how capacitive dropper power supplies work finally sank in. Is your white wine like substance home made, shop bought but modified or just El Plonko box wine like substance? If it isn't box wine, will you be doing a video on it's manufacture? Thanks for another excellent video.
The lead removal from solder is less about the person performing the soldering and more about landfills and improper disposal. It leaches into the environment and can end up contaminating aquifers and end up in people's drinking water, and there it really can cause serious issues.
Hey Clive, I am a retired Contract Plumber and cut my first teeth as an apprentice pouring lead joints and sweating copper with 50/50. The lose marbles in my noggin are the same lose one's I was born with in"56". I have my own personal theory on the ban. It goes to x-ray protection from Nukes for underground bunkers built too protect those who lead us like hogs to slaughter
Perfect +bigclivedotcom! Many uses for this light and circuit. The pink LEDs could be swapped out for UV ones and used as a backstage worklight in theatre and/or forensic analysis (aka CSI) :P
Speaking of getting a slight shock, brings to mind an incident in Viet Nam, back in 1971. I was assigned to a communications Center running the landline teletype system for an Engeneer Group Headquarters. Because of the heat in Nam, and the nature of the equipment, an air conditioner was included in our fiberglass dome type structure, covered with sand bags and withing a chain-link/barbed wire fence with a 24 hour armed guard at the tunnel like door into the structure. Our immediate leader was a very small Staff Sergeant named Tinny. Now one day that air conditioner failed, and Tinny was called to repair it. Remember, in the US Army, the leadership thought that anyone in communications knew all about electricity and could repair any sort of equipment that plugged into the wall. So SSG Tinny went at it, trying to work on that air conditioner, which was located at the far end of the building, in a sort of tunnel that was about 4 feet high, Tinny being all of 5 feet tall himself. He really was a communicator, but not an electrician. Every time he tried to hook up the wiring to the new unit he had installed, he came in contact with the live line and jumped straight in the air, smacking his head in the tunnel. In the end, there were three of us laying on the cement floor, Tinny from the shock, and the two of us working that day in laughter. After SSG Tinny backed off, I went forward and wired the unit, well after cutting the mains first much to the anger of both SSG Tinny and our commo chief who thought our landlines had to be on line 24/7. We were down for about 3 minutes while I made the necessary connections and then back up and running. That said, every time I think back to that day I have to chuckle, SSG Tinny came through it pretty much allright save a few bumps on his head, and a slight burn on one finger.
"a smoky, flamey fuse, but a fuse nonetheless". I had a boss who was fond of saying "everything is a fuse". And for sufficient voltages and currents, he's right, which was his point.
Nice - although do be aware if you are going to use white helmet LEDs that used to be popular in early LED lamp designs - they will have a real world L50 of between 2000 and 5000 hours. L50 being the time before its down to 50% of its light output. They also commonly fail completely in this time spam. Always best to avoid the older leaded helmet white LEDs for any design thats going to have some long duty - not a problem for a PIR driven device. This only applies to the white LEDs that are UV excited phosphor - coloured LEDs have greater lifespans (depending on power output of course)
Great project, are the pink LEDs intended for grow lights? I seem to remember hearing that lead solder was banned to prevent lead entering the environment when people threw away their old electrical goods not because of fumes during soldering. Whether that was a sensible move I don't know, I can't help feeling it would have been better to insist all electrical goods were recycled.
+Wobblycogs Workshop yep lead solder is banned for production use, but not for those who are making or repairing one off items, lead solder is much more forgiving to use. it must add up in landfill over time, same reason they got rid of nicads for most use (portable power tools got an exception, which may be over by now, due to lithium becoming affordable)
+jusb1066 Interesting, I hadn't realized it was still allowed for repair use. I occasionally need to get the soldering iron out and much prefer lead based solder. I have a reasonable stock pile as my Dad was in the electronics industry for many years and gave me most of his old stuff when he retired. I once had the dismay of watching a colleague solder using pure indium wire, at $700+per kg those were some expensive joints (we were chemists at the time).
The good thing about embarrassing yourself in public with highly painful or intense experiences is that the experience itself tends to overshadow the embarrassment. If you're lucky your mind is too scattered by the event to register people's reactions lol. Man, social dynamics are weird
I have to say, etching the PCB in a bag like that is genius...... I remember the old days of using a make-shift tank that bubbled crap everywhere and always makes a mess..... I've been learning too much from your channel... This has to stop :P
Lead solder was banned for manufacturing because it's difficult/not cost effective to remove the lead when the PCBs become waste, not because of any user health concerns. In fact, soldering with lead free solder is worse for the operator than using 60/40 solder. The fumes from the resins in lead free solder are more acrid and the smoke particulates are finer, meaning they get absorbed into the bloodstream easier.
Oh, and about prototypes failing on powerup. I had one the other week. I heard the telltale "ptss" -sound and, as the smoke wafted up to me, I stood there thinking: "Hmm, yeah, putting a standard 47 Ohm resistor directly across an unregulated 24Vdc supply may not have been my brightest idea". :-P
I'm going back in time to watch the videos you did before I found you. As I too decided to test my heart by passing mains across it and ending up arguing with a Welsh dresser I feel we have a certain bond. I was told by my quack that I should have come to see her to have my heart checked out as it can cause problems. I said 'What like death'. I bought one of them thar earth leakage things. I wonder if you will read this 3 years down the line. Good videos Clive but 3 years in the future you don't do so many DIY circuits, I like them. Take care.
The Xuron snips aren't even that expensive, are they? I paid about £8 for a pair of Xuron 170-IIF (Micro-Shear® Flush Cutters with Lead Retainer) in the UK. They aren't the strongest snips in the world, so I have a pair of Engineer brand snips, model NS-06, that I use for most purposes, leaving the Xuron snips for cutting off component legs with that nice flat cut that they give. The lead retainer feature of the 170-IIF is super handy as well. It's not 100% reliable, but most of the time the snips actually hold on to the lead that you've just cut off, rather than letting it go flying across the room, which is super handy :)
+Godfrey Poon Yeah, that's costly. At those RPMs even a simple brad snipped at an angle will "drill" a clean hole. If you want it to last longer heat it to red hot and quench it some peanut oil or tranmission fluid. Saltwater brine works well for low carbon alloy steels also.
great build Clive, when using your new cutters does the slicing of them stop the wire from shooting out, i noticed you place your finger over the end, if i tried that with my standard side cutters the wire would embed its self into my finger.
that was a cool video, you could use that for lighting set pieces for example, you could mount it behind a crystal statue and the light would shine through. that would look cool.
Just in case someone at Xuron is following Clive I'd like to mention that because of this video I just bought a (genuine) Xuron 170-II Flush Cutter and a 440 Precision Scissor. I haven't had a chance to use them much yet but they certainly have a nice look and feel to them.
Lead solder is banned in commerdial products not because it's dangerous to handle, but because it's polluting when the product eventually goes to the trash. Also heavy metals are neurotoxic long before they're deadly.
Don't eat it and wash your hands. No soldering iron I've ever seen will gasify lead. If you were to get a hand full of dirt, lead would most likely be somewhere around 0.001-0.0001% of that pile.
HI Clive, could you tell me what make your plug in Amp, Watt, Volt meter is? Also, any chance of you doing a review of different makes? I've been looking at a few (and other YT reviews) but respect your methods and opinions on such things. Thanks, Stuart.
You could have partially removed the first clip. I though you were going to do that. In fact, would it have worked if you just let some of the etchant in and resealed?
nice cliveWork - I also like the green sticks helping to bite the copper from the PCB - never seen it before. How are they called (I'd like to get some)?
Hi, what software do you use for making the PCB layout, I've been finding it hard to find a good easy to use software. Any help would be much appreciated. By the way, love all the videos keep it up regards wayne
I use Sprint Layout, which is very easy to learn. If you look at the page on my site that has the free PCB file downloads then you'll find a link to the software's site.
Im not 100% sure but while I agree lead solder flows really well, I moved onto lead free because i did a lot of elec kits when I was a kid and i breathed in enough of the smoke. And i genuinely think I'm a little slower for it... That or age... :( but I read there is some lead in the fumes and absorbs when your handling it... But I might be wrong... Anyway as always love the vid :D
There is sure some risk in the lead fumes in the smoke or actual fumes. But if you are soldering on this level and in this amount, it should not do any harm. I would not be so shure if you are in a badly to not at all vented room with 150 chinese workers going to pounds and pounds of lead solder every day. But then from what is in the fumes, I am not actually sure if the lead is the most harmfull ingredient. Good ventilation or one of those fume extractors with either a good filter or getting the fumes far away from you (not just to the back of your desk) Still I consider leas to be among the absolutely less desireable metal fumes to inhale, coming quite close after zinc (which keeps a top rank) and mercury. But on the long run I think, the main reason to avoid lead at least on a large scale, is that it might create quite some issues when recycling the electronics and components. At least that was what I was told, that it takes quite some effort to separate it.
I'd probably do a lot of PCBs home if I had the equipment to do it. I started not too long ago making PCBs in Target3001, and its actually quite enjoyable and fun. I have loads of LEDs and components (I got the amazon and ebay fever and probably spent a bit too much.. 100 Leds for £0.99? Sure, got to get them!) and made PCB files for LEDs and RGB LED controller strip, and want to design a simple 'fake arduino' and few other things. The problem is that Id have to buy a printer, those bags and clips, the PCB material, the thing to cut the PCB, drill, drill bits, the etching and devoloping liquids.. Although since im a student and live in a tiny room, Id have no space for anything either. I can't even solder because I dont want to fill the room with lead fumes, nor do I have clips, soldering iron or wire strippers either.. Have to walk 30 min everytime I even want to solder something to the university electronics lab (and only during weekdays and certain hours).. Maybe in few years..
Hi, nice vid, it really shows your skill, this is some thing! can you please tell me in what software do you design those pcb's? thank you a lot for all your videos, it quite make my day!
After doing several High wattage led assemblies I was disappointed that this build turned out to be only 1.5W. I had expected more from what I thought were hi-power leds.
you could try to do a simulation of your circuit, before making it. For example in LTSpice. I am no expert in this software but it is free and contains a lot of parts you can use and gives you a lot of options to "test" your design
Watched this one again, as it is a very good one. You said somethig about getting a face showered with glass, this happened to me many moons ago. You see, my father was what you could call a conosour of Vodka, and drank up to a fifth a day of the clear gold. Back then things being as they were, all garbage was to be burned before the truck collected the ash, thus saving space in the dump and the truck. It was my chore, then a boy of 9 to carry out the garbage, and burn same each day, but garbage collection day. I used to really enjoy watching that fire, perhaps I was a fire bug in the making, however when one of dad's empty bottles exploded from the heat, throwing molten glass into my face and thankfully into my glasses, I quickly gave up the joy of watching fires, and began to dispare at taking out the garbage. The scars are still with me nearly 60 years latter but in the process of aging, have become quite hard to find.
In future versions of this floodlight, please remember to leave the earth wire to be the longest wire. The reason being, if the whole mains wire gets pulled out, the earth wire gets pulled out last. Just a small extra safety measure. Other than that, a great build, especially as you included a earth wire. Many people would leave that out because earthed cable costs more.
I think a lot of people on youtube try too hard to be impressive in some way or another, and it rarely ends up working out. The nicest things about your vids are the down to earth attitude, practical advice, a bit of fun and humor... it just never feels like a waste of time to watch. The pace is just right. Not too slow (ugh), not too fast where critical info is skipped (ughhh). Come to think of it, some people who shall remain nameless often say things like: "I'm not going to explain how this works because it's complicated/would take too long" - or something to that effect. Sorry but, it takes seconds to cover the basics of something in a general way, if you actually know what you're talking about. Better than leaving a big gap for the inexperienced viewers to have to fill in somehow. ANYHOW. I hope you realize how many people love you, whether they admit it or not haha. :D
Your videos are contagiously addictive in a very nice calming way.
He's the Bob Ross of Electronics. :) XD
wow 37 minutes and all i can remember is Rice, white wine like substance and chocolates with pink leds. I l also love how your not bothered about leaving the camera running while you quickly go away to grab something rather than editing that out. You have an amazing calming voice, just love listening to your videos/
It was great to see you take this all the way from an idea to an actual assembled unit. Good commentary as well, I really learned something from this. I think you would make a great college teacher!
Speaking of relaxing, your videos very much fall into that category.
I watch them in bed. Relaxes the day away.
Love your technique for holding the board and solder in one hand. You make it look so natural and easy. When I have to do it I’m about as graceful as a baby deer trying to walk for the first time. If you’ve never seen that it’s quite amusing but kind of pitiful at the same time.
Thanks BC for another great vid! Handy tip: If you make and install a bunch of these floods around your house, you wont need rose colored glasses to look at the world anymore!
This is an excellent video from circuit design to layout to board
manufacturer to final test showing all of the steps necessary, and good
explanations of the reasoning why at each step...with amusing Cliveisms
interspersed "...white wine-like substance for peasants...". Great stuff!
Great job. I loved seeing the end-to-end on the whole project and seeing the PCB being actually developed. I hadn't even thought it was realistic to do that on a hobbyist level before now.
Lol I think I got too engrossed watching the video as I tried blowing away as he was drilling
+WM2869 I thought it was just me that did that.
Imagine it in VR
You blew some in my ear !!!
I always do that. I also want to grab the screws he ejects so he doesn't lose them!
lol no way!!
I was 40 years back in time when you were drilling the holes in the pw, thanks for the video and your way of doing it all, you are so relaxing and funny at the same time.
Clive, I love how you are obviously knowledgeable about this stuff but it still find it cool to take stuff apart, explore and even improve things!
Getting lost in the task is part of the fun!
Best Regards!
That is a very clever way of cleanly etching and drilling a small PCB! Bravo!
great work, Clive! thanks for sharing it with us. One day soon, I'd like to build my own modestly bright, appropriately coloured wash light.
since you mentioned detonation: I saw recently that the Isle of Man had a small incident with some unexploded WW2 ordnance. That looks like it was rather exciting.
Liked the project. Long videos are great!
The comments about the over blown reaction to lead solder are so true.
I'm an electrician too and liked the supermarket story. I work in a hospital, and have gotten zapped in odd locations. An operating room was memorable.
loved every minute. thank you. I'm currently experimenting with a Jacob's Creek Shiraz Cabernet red type substance
Thanks for the video Clive, I quite enjoyed it. In regards to industry going lead free solder, it wasn't so much to protect workers from lead fumes, but to protect children and the environment near waste disposal sites who end up with lead flavoured drinking water when huge amounts of electronics are dumped.
i love these longe project videos. Could watch you all day long
+Audio Joe Clive's videos are oddly very soothing--almost zen-like!
I usually tell myself I'll only watch one or two in the evening, and then I get caught up re-watching earlier installments.
+Benjamin Shelton Same with me. always ending in watching like 10 of them
Whenever I tinker, I just start with one of his videos and then let RUclips's Autoplay have a go.
It's been a long time since I etched a circuit board, though a little less than a long time since I soldered anything, but I think I could make this without too much problem. I enjoyed this a lot and there is much to be said for the experience of watching something being made, (probably more so if making it myself), especially when accompanied by Clive's dulcet tones.
to hell with it ... I learned more from you then I ever had during my 5 years of study ... I'm not saying my teachers are to blame... but you just make it far more fun with visualization of what are you working on.
Anyway ... if you ever get around to read this :) ... I salute you and send a BIG thank you.
+RoPo 0101 Glad to inspire. I intend to do more custom builds like this in the future.
Very neat repurposing project, it'd be fun to see the superflux one too... :)
And a possible idea for other videos, Clive's storytime, just talking about things you've done that ended with hilarity, embarrassment or otherwise, that supermarket story was quite a good one... :D
HELL yeah, Xuron! :D I LOVE mine. I use the cutters and a set of their pliers almost every single day. They have been nothing short of amazing in terms of quality and longevity.
I have a pair of 25+ year old xeron 170's I stole from my dad as a boy. They're great snips but, they look like these have lead the life of a pair of tin snips.
One blade has the end missing and there is about 4mm of viable cutting surface but, still the best damn snips my dad ever bought!
well done my friend
What a brilliant little kit for a newcomer into electronics.
👍👍👍👍
Great project, love your vids! Lead soldier can be toxic if used in plumbing as it leaches into the water, that was my understanding to why there was a big push for its ban
That hand-drilling routine brings back memories, but these days I wouldn't give up my mini CNC mill for anything - engrave the traces, drill the holes, route out the board all in one... :)
Using some SMD resistors and an SMD bridge rectifier, you could probably squish another row of LEDs in there.
Also if you're worried about the isolation, you could use some nylon screws instead, and have nylon (eh, almost any plastic will do) spacers as well, to keep the board off of the back of the housing.
It's fun to see you tear apart stuff, but I like it better when you make something BETTER than it was. Keep it up.
I've been soldering for 56 years and no lead poisoning, yet, AFAIK. BTW you are correct to consider the voltage rating of resistors. I've seen many failures of lower voltage resistors connected across 350v DC. I prefer the 0.75 Watt/350v resistors sold by Farnell.
Glad to see you consuming sustenance and an adult beverage during construction and design. Must keep that energy level up, keep those neurons perking! Great vid, as usual.
Your Supermarket Story reminded me of a Job during my Apprentice Time :) I worked in a Supermarket where they put Mains Voltage on the Metalgrid of the Hung Ceiling, apparently to get rid of Rats :D
The Store was closed so there weren't many people around. But it kicked me off the Ladder, and I couldn't stop yelling when I found out why I got a Shock.
+DJ1812 That sounds more like leakage on an ungrounded ceiling. Not that uncommon.
I wish it would have been that.
The Ceiling wasn't grounded, but there was a Junction Box with a Single Brown Wire coming out, and attached to the Grid with one of those Fork Cable Lugs and a Self Tapping Screw.
I recently had to enter rehab after playing the "I'm not sure" game. The bill is in the mail swimming in cheap Chinese LEDs, Clive.
I think i will ask the local brothel if they want some of these.
Both as working lights and streetlights ;)
im sure you'll get something you desperately want in return
They have to be Red. Wait; maybe not. "Roxanne! You don't have to put out the Red Light!" (The Police).
Thanks Clive. Nice build.
I've always enjoyed using this mnemonic I came up with whilst trying to remember resistor colour codes.
'B'ad 'B'oys 'R'ape 'O'ur 'Y'oung 'G'irls 'B'ut 'V'iolet 'G'ives 'W'illingly without a 'S'econd 'G'uess.
I bought an outdoor floor that runs on 12 V ac or DC. I bought a real outdoor transformer and so far it has been working for 5 years! The leds last forever but the supply lasts a year or two.
Great vid! Very interesting to see circuit design and repurposing. Glad to see from the comments below that you're planning on doing some more vids like these. I'll be watching them all with a tin of cheap aussie lager in hand.
Keep it up
Shouldn't the earth wire be longer than L and N so it will be the last wire to get disconnected I case the cable gets 'pulled' too much.
Nice lamp. I can just listen to you for hours. It's wery therapeutic.
I can relax with his voice
Clive you're such a big role model for me. Keep up the great work.
On RoHS: “RoHS and other efforts to reduce hazardous materials in electronics are motivated in part to address the global issue of consumer electronics *waste*.” Lead has been shown to have extremely negative effects as a pollutant: cognitive difficulties etc.. Waste incineration (possibly with energy recovery) springs to mind as a risk where discarded electronics are not separated from general household waste. With that said, the best way of reducing the hazards of e-waste would be to create less of it: Right To Repair and mandatory MTBF requirements at minimum, and ideally, an attempt to combat psychological behavioural manipulation (or "influence" if you prefer) by advertisers intended to promote excessive and wasteful consumption.
i have the 12v ver and its the best by far less power and just keeps working 18 months and still going strong :)
13:55
"... and a glass of a white wine-like substance for peasants".
Brilliant!
+khachaturian at least he's smart enough to mix it with chocolate! Never seen that brand here in the states. I like the Andes mints and the anything swiss chocolate. Russel Stover is the poor man's Godiva over here.
brilliant big clive I really like the bare bones working of your circuits all on show it looks great
bigclive, My first soldering iron was one that you had to heat on the gas cooker, lrg head 1/2" by 1/2" X 2" with 6" long bar and handle. very early 70's couldn't afford a expensive electric one.
I made some good things with that, mind you boards were bigger!
Really great video. Learnt a lot and, as always, very relaxing listening to your narration.
I think how capacitive dropper power supplies work finally sank in.
Is your white wine like substance home made, shop bought but modified or just El Plonko box wine like substance? If it isn't box wine, will you be doing a video on it's manufacture?
Thanks for another excellent video.
The lead removal from solder is less about the person performing the soldering and more about landfills and improper disposal. It leaches into the environment and can end up contaminating aquifers and end up in people's drinking water, and there it really can cause serious issues.
That clip is crazy! 100% seal? Wow.
Hey Clive, I am a retired Contract Plumber and cut my first teeth as an apprentice pouring lead joints and sweating copper with 50/50.
The lose marbles in my noggin are the same lose one's I was born with in"56".
I have my own personal theory on the ban.
It goes to x-ray protection from Nukes for underground bunkers built too protect those who lead us like hogs to slaughter
Your videos relax me. Thanks for sharing.
So incredibly informative and also enjoyable to watch. Cheers to you Clive!
Perfect +bigclivedotcom! Many uses for this light and circuit. The pink LEDs could be swapped out for UV ones and used as a backstage worklight in theatre and/or forensic analysis (aka CSI) :P
Speaking of getting a slight shock, brings to mind an incident in Viet Nam, back in 1971. I was assigned to a communications Center running the landline teletype system for an Engeneer Group Headquarters. Because of the heat in Nam, and the nature of the equipment, an air conditioner was included in our fiberglass dome type structure, covered with sand bags and withing a chain-link/barbed wire fence with a 24 hour armed guard at the tunnel like door into the structure. Our immediate leader was a very small Staff Sergeant named Tinny. Now one day that air conditioner failed, and Tinny was called to repair it. Remember, in the US Army, the leadership thought that anyone in communications knew all about electricity and could repair any sort of equipment that plugged into the wall. So SSG Tinny went at it, trying to work on that air conditioner, which was located at the far end of the building, in a sort of tunnel that was about 4 feet high, Tinny being all of 5 feet tall himself. He really was a communicator, but not an electrician. Every time he tried to hook up the wiring to the new unit he had installed, he came in contact with the live line and jumped straight in the air, smacking his head in the tunnel. In the end, there were three of us laying on the cement floor, Tinny from the shock, and the two of us working that day in laughter. After SSG Tinny backed off, I went forward and wired the unit, well after cutting the mains first much to the anger of both SSG Tinny and our commo chief who thought our landlines had to be on line 24/7. We were down for about 3 minutes while I made the necessary connections and then back up and running. That said, every time I think back to that day I have to chuckle, SSG Tinny came through it pretty much allright save a few bumps on his head, and a slight burn on one finger.
Hope you get to half a million soon Clive you sure do deserve it! Love your videos
Great project. I learned so much from your videos, especially about soldering. Thanks for that. Keep up the good work! And greetings from germany :)
"Big fat industrialized fingers" omg nice ! Your channel is really a nice find. Also it makes me want to improve my interest in electronics.
"a smoky, flamey fuse, but a fuse nonetheless". I had a boss who was fond of saying "everything is a fuse". And for sufficient voltages and currents, he's right, which was his point.
Nice - although do be aware if you are going to use white helmet LEDs that used to be popular in early LED lamp designs - they will have a real world L50 of between 2000 and 5000 hours. L50 being the time before its down to 50% of its light output. They also commonly fail completely in this time spam. Always best to avoid the older leaded helmet white LEDs for any design thats going to have some long duty - not a problem for a PIR driven device. This only applies to the white LEDs that are UV excited phosphor - coloured LEDs have greater lifespans (depending on power output of course)
I think I've just polished off a bottle of Whiskey watching this, although not "100% sure". Thanks Clive!
Alright Clive, what's up with all the pink LED conversions? Are you secretly growing Ganja or what?
Great project, are the pink LEDs intended for grow lights? I seem to remember hearing that lead solder was banned to prevent lead entering the environment when people threw away their old electrical goods not because of fumes during soldering. Whether that was a sensible move I don't know, I can't help feeling it would have been better to insist all electrical goods were recycled.
+Wobblycogs Workshop yep lead solder is banned for production use, but not for those who are making or repairing one off items, lead solder is much more forgiving to use. it must add up in landfill over time, same reason they got rid of nicads for most use (portable power tools got an exception, which may be over by now, due to lithium becoming affordable)
+jusb1066 Interesting, I hadn't realized it was still allowed for repair use. I occasionally need to get the soldering iron out and much prefer lead based solder. I have a reasonable stock pile as my Dad was in the electronics industry for many years and gave me most of his old stuff when he retired. I once had the dismay of watching a colleague solder using pure indium wire, at $700+per kg those were some expensive joints (we were chemists at the time).
The good thing about embarrassing yourself in public with highly painful or intense experiences is that the experience itself tends to overshadow the embarrassment. If you're lucky your mind is too scattered by the event to register people's reactions lol. Man, social dynamics are weird
Could you do some more theoretical videos where you explain things like the capacity dropper in more depth. Thanks, really enjoying your videos!
I have to say, etching the PCB in a bag like that is genius...... I remember the old days of using a make-shift tank that bubbled crap everywhere and always makes a mess..... I've been learning too much from your channel... This has to stop :P
Lead solder was banned for manufacturing because it's difficult/not cost effective to remove the lead when the PCBs become waste, not because of any user health concerns. In fact, soldering with lead free solder is worse for the operator than using 60/40 solder. The fumes from the resins in lead free solder are more acrid and the smoke particulates are finer, meaning they get absorbed into the bloodstream easier.
Oh, and about prototypes failing on powerup. I had one the other week. I heard the telltale "ptss" -sound and, as the smoke wafted up to me, I stood there thinking: "Hmm, yeah, putting a standard 47 Ohm resistor directly across an unregulated 24Vdc supply may not have been my brightest idea". :-P
And possible contributed to cancer - though the smoking of woodbines on the workbench in the 1950s contributed too
I'm going back in time to watch the videos you did before I found you. As I too decided to test my heart by passing mains across it and ending up arguing with a Welsh dresser I feel we have a certain bond. I was told by my quack that I should have come to see her to have my heart checked out as it can cause problems. I said 'What like death'. I bought one of them thar earth leakage things. I wonder if you will read this 3 years down the line. Good videos Clive but 3 years in the future you don't do so many DIY circuits, I like them. Take care.
I have some DIY circuits coming up soon.
Just bought some of those Xuron shears!! Nice recommendation.
I did too, as my knipex are wearing down after all the time
The Xuron snips aren't even that expensive, are they? I paid about £8 for a pair of Xuron 170-IIF (Micro-Shear® Flush Cutters with Lead Retainer) in the UK. They aren't the strongest snips in the world, so I have a pair of Engineer brand snips, model NS-06, that I use for most purposes, leaving the Xuron snips for cutting off component legs with that nice flat cut that they give. The lead retainer feature of the 170-IIF is super handy as well. It's not 100% reliable, but most of the time the snips actually hold on to the lead that you've just cut off, rather than letting it go flying across the room, which is super handy :)
14:40 - If I attempted this, I would have approximately 12,000 broken carbide drills.
(±10k)
+Godfrey Poon Yeah, that's costly. At those RPMs even a simple brad snipped at an angle will "drill" a clean hole.
If you want it to last longer heat it to red hot and quench it some peanut oil or tranmission fluid. Saltwater brine works well for low carbon alloy steels also.
great build Clive, when using your new cutters does the slicing of them stop the wire from shooting out, i noticed you place your finger over the end, if i tried that with my standard side cutters the wire would embed its self into my finger.
that was a cool video, you could use that for lighting set pieces for example, you could mount it behind a crystal statue and the light would shine through. that would look cool.
HI CLIVE I loved watching this video it was so interesting I forgot to drink my cup of tea.
Nice Work Clive. Cool Lamp. Keep up the great work. Nick.
Heath presents: Exclusive line of BigClive boutique kits!
Just in case someone at Xuron is following Clive I'd like to mention that because of this video I just bought a (genuine) Xuron 170-II Flush Cutter and a 440 Precision Scissor. I haven't had a chance to use them much yet but they certainly have a nice look and feel to them.
Well done as usual, Clive! Thank you.
Only found your channel recently, and I love it!
I really like the way you lay out the boards :)
I won't lie. Most of my designs have a hint of autism to them in their symmetrical layouts.
Very cool clive. Thanks for the PCB file. I will give it a try.
Lead solder is banned in commerdial products not because it's dangerous to handle, but because it's polluting when the product eventually goes to the trash. Also heavy metals are neurotoxic long before they're deadly.
Don't eat it and wash your hands. No soldering iron I've ever seen will gasify lead. If you were to get a hand full of dirt, lead would most likely be somewhere around 0.001-0.0001% of that pile.
Thanks, Clive for the memories loved it as always a good video
You make that look so easy.
Antex soldering Irons. Wow that takes me back. The Red X25 or yellow X15. So much simpler that the new soldering stations.
food in your videos makes them 10 times better haha, they're already brilliant
HI Clive, could you tell me what make your plug in Amp, Watt, Volt meter is? Also, any chance of you doing a review of different makes? I've been looking at a few (and other YT reviews) but respect your methods and opinions on such things. Thanks, Stuart.
You could have partially removed the first clip. I though you were going to do that. In fact, would it have worked if you just let some of the etchant in and resealed?
This method is much better way to make PCB than the toner transfer method particularly when you leave the photo resist on.
You mentioned that getting the spacers in was difficult. Have you tried using a little bit of superglue? I believe it's non-conductive.
This project would make a fun DIY kit :)
nice cliveWork - I also like the green sticks helping to bite the copper from the PCB - never seen it before. How are they called (I'd like to get some)?
very beautiful explained,thank you for your time
Hi, what software do you use for making the PCB layout, I've been finding it hard to find a good easy to use software. Any help would be much appreciated. By the way, love all the videos keep it up regards wayne
I use Sprint Layout, which is very easy to learn. If you look at the page on my site that has the free PCB file downloads then you'll find a link to the software's site.
Im not 100% sure but while I agree lead solder flows really well, I moved onto lead free because i did a lot of elec kits when I was a kid and i breathed in enough of the smoke. And i genuinely think I'm a little slower for it... That or age... :(
but I read there is some lead in the fumes and absorbs when your handling it... But I might be wrong...
Anyway as always love the vid :D
There is sure some risk in the lead fumes in the smoke or actual fumes. But if you are soldering on this level and in this amount, it should not do any harm. I would not be so shure if you are in a badly to not at all vented room with 150 chinese workers going to pounds and pounds of lead solder every day.
But then from what is in the fumes, I am not actually sure if the lead is the most harmfull ingredient. Good ventilation or one of those fume extractors with either a good filter or getting the fumes far away from you (not just to the back of your desk)
Still I consider leas to be among the absolutely less desireable metal fumes to inhale, coming quite close after zinc (which keeps a top rank) and mercury.
But on the long run I think, the main reason to avoid lead at least on a large scale, is that it might create quite some issues when recycling the electronics and components. At least that was what I was told, that it takes quite some effort to separate it.
a fan man or diy fume extractor
Clive - where did you get your photo sensitive board from? I like the white finish.
I'm "100% sure" I've had a bit too much to drink.
+TheSkytherMod I'm less than 5 mins in and i'm already so drunk.
I'd probably do a lot of PCBs home if I had the equipment to do it. I started not too long ago making PCBs in Target3001, and its actually quite enjoyable and fun. I have loads of LEDs and components (I got the amazon and ebay fever and probably spent a bit too much.. 100 Leds for £0.99? Sure, got to get them!) and made PCB files for LEDs and RGB LED controller strip, and want to design a simple 'fake arduino' and few other things. The problem is that Id have to buy a printer, those bags and clips, the PCB material, the thing to cut the PCB, drill, drill bits, the etching and devoloping liquids.. Although since im a student and live in a tiny room, Id have no space for anything either. I can't even solder because I dont want to fill the room with lead fumes, nor do I have clips, soldering iron or wire strippers either.. Have to walk 30 min everytime I even want to solder something to the university electronics lab (and only during weekdays and certain hours).. Maybe in few years..
Hi, nice vid, it really shows your skill, this is some thing! can you please tell me in what software do you design those pcb's? thank you a lot for all your videos, it quite make my day!
I have a pair of Klein flush cutters that are virtually indistinguishable from the Xuron. I wonder if Xuron actually made them.
the etching bag was just f@#$! brilliant man! cheers.
After doing several High wattage led assemblies I was disappointed that this build turned out to be only 1.5W. I had expected more from what I thought were hi-power leds.
you could try to do a simulation of your circuit, before making it. For example in LTSpice. I am no expert in this software but it is free and contains a lot of parts you can use and gives you a lot of options to "test" your design