ledmatrix 20x15 Glediator/Jinx/Arduino
HTML-код
- Опубликовано: 5 сен 2024
- I use the ws2812b and control whit Glediator/Jinx led controller software. if you have some question don't afraid ask me . I used the FastLED library to programming the ledmatrix controlled by arduino.
Glediator/protocol : www.solderlab.de/
Jinx : www.live-leds.de/
FastLED : github.com/Fas...
I do NOT own the songs:
Vexento RUclips channel
/ @vexento
Vexento - Trippy Love
• Vexento - Trippy Love
Vexento - Digital Kiss
• Vexento - Digital Kiss
In a near future I will build a much bigger wall. Whit 2304 Leds do you guys want to see a video how I building it?
Hi Tamás Vasváry what exactly which controller led strip You want to build a new matrix with 2304 Leds ? Thanks for the reply and for Your work .
Teensy 3.2 and the OctoWS2811 adaptor
Excellent choice . When waiting for Your video lesson ?
I dont want to make a tutorial. My plan is make a short time-lapse how I built it . I think its not necessary to make another lesson videos. but if you guys want I try it but its not that complected
What will be the pixel limit in this construction?
good work!!
Could you please make a tutorial how you set up jinx and the arduino? Would be very helpful for me
@Mike Sisk made a really good video How to set up the jinx and the arduino. But im pretty sure you can find more informative videos on yt.
How would I make a matrix with PL9823 LEDs that can use Glediator? Can I find the schematic anywhere? I was thinking 10x10. And it needs to be compact, so I can't use any massive power supplies. If you're interested in helping me, I could provide more info.
Hi friend, nice project :-) thx for sharing.
woow :D thank you :) btw I watch your videos about how to control the Glediator :) you are my MASTER SIR !
Yes,I put three file into Java lib and bin,before I test from Gladiator and arguing, I run strip with Arduino work fine
Nice project. I've built one similar but with WS2801 and a Teensy 3. Could you tell me which Arduino you are using? The teensy is nice fast and no lagging and I am wondering how the Arduino is doing for you? what kind of fps on the Glediator software are you getting? Also how the hell are you playing pong at the end??
sorry for the late. so I use an Arduino uno and the Glediator and Jinx are locked up to 25fps
Yo logre hacer eso con un código que le cargue al arduino mega que me costó trabajo encontrarlo,pero me sentí un poco decepcionado porque el código solo funcionaba con el arduino conectado a la computadora,entonce viendo unos video aprendí a cargar las animaciones a una microSD,pero en eso videos no te enseñan que código debes cargar al arduino para que lea las animaciones que grabe en la microSD,busque por toda la red y ese código sino lo he encontrado como usted podría ayudarme en esto,para animar mi matrix
Great job. Which mcu are u using ?
Que código debo cargar en el arduino mega para que me lea las animaciones que grabe en la micro sd con el JINX
Hi Tamás Vasváry . Thank you for Your work . You used the IDE to load Your sketch 1.6.9 or 1.6.4 ? . 300 pixel Arduino nano is worth praise .
I used the newest IDE? why you ask it?
The sketch which I have used before in another project only worked with certain IDE .
Great job!
If I may ask. How did you connected Jinx! to Arduino? I can't find a way.
I have ws2812_Glediator.ino loaded in Arduino but my problem is that I can't connect Jinx! or Glediator software.
In the other hand RemoteLight software connects so easy.
I installed RXTXs files and FTDI drivers but nothing seems to work. I must be missing something.
The comm port doesn't show at all on neither of the PC software (Jinx! or Glediator)
Any advice would be greatly appreciated. Thanks.
I think you have to do again the rxtx install. watch some videos how to do it.
Thanks so much for your reply.
watch this video how to install it. ruclips.net/video/3mwkC4MrCgw/видео.html
hello For several days I have tried a connection with Arduino directly in my light panel and I see that you have succeeded I would like to know how did you manage to succeed in connecting via Arduino I try all the ways and I cannot do it I have the Arduino nano and Arduino mega 2560 version .I he tries to connect with Glediator as well as Jinx and I can't do it my COM port works very well and everything is functional on my computer no connection is made thank you for your help.Which program with you to use in FASTLED inside in the face the help of Arduino to thus succeed in making return in communication Arduino dirt to your light panel. THK
i have a adafruit 32x32 led matrix and want to program it with a arduino uno, can i do that and if i can,how do i do it?
Good afternoon, Tamás.
In this file I have to send to arduino the number of pixels that I'm going to work, is there any way to send a number of pixels to the arduino and work with fewer pixels inside the software jinx?
Latest 1.8.3 I wanted to try to repeat Your experience . It's brilliantly great . I use a Chinese Arduino nano bootloader 340 ( my experience Arduino nano + ws2812b capture from the screen using AmbiBox works maximum 250 pixels ) I'm looking for a sketch to work Arduino nano with tape ws 2811 on Your project with maximum use of pixels . Thank you again for Your video .
you can find my arduino code below. You just need to modified a bit .
coool....
Nice works please also do a making video
Theres a lot of video how to build one :) I recommended to watch GreatScott , but if you want a further details ask bravely .
So I have a matrix, an arduino and Jinx, how do I integrate them where the arduino would work with Jinx? Lost on that bit. Any help or pointer would be greatly appreciated!
upload the arduino code...
Can you give me a bit more information about the hardware? Is the matrix build by your own or do you have bought it? What power adapter do you use (how much AMP, WATT and VOLD). Thank you
I built it but its not a big deal just soldering. I ended up use an 5V 100W 20A power supply. Because each led drown 60mA at full brightness. So this ledwall contain 300 Leds 300*60mA = 18 000mA 18A but you need a slightly bigger power supply. And you can find all of the necessary link in the description .
Tamás Vasváry thank you for your fast answer. If I start with my project, this will help me a lot.
What did you use as power supply for the leds and the arduino?
www.solderlab.de/ this link not found, could u help me I unable to connect jinx to arduino over serial communication.
Hello friend, please help.
Every time I increase my number of LEDs, will I have to download the pro arduino sketch?
For example:
The Nano can run up to 600 leds, I wanted to leave the draft for 600 leds discharged
inside it and work with smaller arrays inside the Jinx, is that possible?
Rogerio Sousa no you dont need to reupload te sketch. you need to modifie the jinx and set a new width and height and recreat a new array
In that case, I would be able to declare in the sketch the maximum amount that the arduino would support, for example, 600 pixels.
So in jinx did you set up an array of 10 x 20 to work with only 200 pixels in case? Could work ?
Hi, I'm trying to display animations on 10x10 Led Matrix by using Jinx! with Urduino but I really don't know how I can copy&paste the code of animations I made by jinx! on Urduino. I could find the way in other control software called LEDMatrixControl1.1.5 made by Tyler Jones or isn't it necessary to do it?
You dont need to copy paste an code to the Arduino. watch this video and you will know how its done :
ruclips.net/video/3mwkC4MrCgw/видео.html
Mam pytanie jak masz ustawione wyjście w programie purpura devices ?
si espanol? ... srly use English when you want to ask something....
Какое максимальное количество светодиодов ws2812b могут быть использованы в Вашем проекте с Ардуино нано ?
wooooooooooooooowwwwww. ok xddd I dont understand it xD
@@bithajcsar3 How many led's can use in your project?
HI...CAN I DO THAT WIRELESSLY? I WANT TO MAKE 4 SETS OF LED MATRIX AND CONTROL IT WITH ONE DEVICE.IS IT POSSIBLE?JUST A BEGINNERS HERE...THANKS
first you dont shout at me thats rude :P and second you can kinda... you need a raspberry PI and use Gladiator instead. A bit complicated to use the pi wireless but its possible. I know that cause I done it. :D I think I used RealVNC for a virtual destop client.
@@bithajcsar3 ...sorry.....I didn't notice.....thanks for the idea...….I hope to watch the video of your project using raspberry pi......
friend, I read all the comments, but I can not run JINX, with Glediator running fine. What exactly do I need to do other than what I did to run Gladiator for me to use JINX?
Rogerio Sousa Could you please tell me more information what exatly happen when you try to controlling with JINX? maybe you forget to set up the LEDs layout or you chose a wrong communication protocol
Thanks But, I did, can you tell me where I get the most animations for i Jinx and gladiator?
Thank you Tamás
Could you share the code of the remote control game at the end of the video?
Sure but the code is a big junk ... :/
www.dropbox.com/s/0r8ij9j1b9e36i8/pattogo_labda_sz_veg.ino?dl=0
Hi there. I am having a problem with my setup. I am using a 10x10 matrix an an Arduino Uno. Iam using the sketch from solderlab.de. It loads fine on my Arduino, but in Jinx when I start the output all the leds turn off and nothing is displayed. I have tried all the effects, but with the same result. The rx led of arduino keeps flashing. If I load an example sketch from adafruit it works fine. Can you help me out?
Exact same situation. Glediator software works fine. With jinx, nothing. Rx flashes though.......Did you figure anything out?
@@martinmchugh1924 I am using a different sketch right now. I will have it all documented next week. As soon as I get it done I will post a link of my project.
@@DJEltonPimentel Ok cool. Working on an 8x8 coffee table myself.
@@martinmchugh1924 This is the link with the first steps of my project. hackaday.io/project/162951. If you have any questions, please let me know. As we are on a Holiday season, I might not be on line for the next couple of weeks.
@@DJEltonPimentel Thanks so much for your help. Uploaded your code and followed the PDF. Worked beautifully. I had not been setting up the output patch area correctly. So I went back and got it working with the Glediator code also! Thanks again.
Привет,как ты подключил спектроанализатор?
hi: I use Arduino Mega 2560 + Adafruit_NeoPixel +WS2812B as My first Test in RGB strip and work fine ,but I want show more Animation in WS2812B LED matrix , so I add Glediator or Jinx ,But It can't work fine, How do I put them together ? Or I need some other device for Glediator and Jinx.
I find its java problem, I install two version and remove all and install java ,then I can find the com port ,but RGB strip still can't work fine , it didn't show anything .
Did you use the glediator or mine sketch? You need a "special" protocol to use the leds via Jinx/glediator. You can find the code in the gledaitor website
Yes，I got the code from Gladiator web site and set data pin as 6,led number as 100, after I upload sketch to Arduino, it's RX lighting is working, but strip didn't work. What is special potocal I need write to the sketch?
hmm Interesting :/ does it work whit an example code? are you installed the RXTX library in the correct folder?
How do you get output from jinx to arduino?
I'd like to know that too, in gladiator you upload a specific sketch and it works, but JINX from what I read doesn't work the same.
in the setup menu--->Output devices device type Glediator if you installed the RXTX library well you should see a COM port and set the baud rate 1million
thanks :)
@@bithajcsar3 hola saludos desde mexico quiero felicitarlo por su trabajo y me gustaria comunicarle que tengo un problema al cargar el codigo de R. Helleral arduino
es el unico problema que tengo ya instale el java y el glediator y me lee el com 7 en glediator
@@bithajcsar3 tengo problema con esto:
// Initialize UART
UCSR0A |= (1
do you have a picture of the back of the led wall?
you can see how i connect the leds on the picture
oh thanks, i guess i fast forward a bit too far
did you btw made a border on the isnide to create the pixel feel?
what options needed to link the arduino to jinx, in gladiator you just select the com port. but cant find that in jinx. any suggestions?
you should see in setup and output device
thanks it works. didnt realize i had to stop output.. one more question. When selecting a output patch, how do i get the the colors to sync right.. some of the colours arent showing right but the animation is ok, just colours are out of sync.:)
I think you can switch the color profile in Output settings because its not RGB. I think its GRB or something like that.
you my friend are a great help, you should really consider adding an eth address that accepts all erc20 tokens. so people can tip you for your help.. But anyways thanks again BIG help.
I have never heard about erc20 tokens what is this?
Are you running matrix from Arduino board or teensy please?
Im using an Arduino uno
Tamás Vasváry ok cool that's what I'm using but with a SD card shield so I can have it standalone
I WILL TRY
is this ARDUINO UNO ?
yes
@@bithajcsar3 ARDUINO UNO Run Maximum Number of Led ?
Great project !!!please could you share me te arduino code ?? thank´s a lot
Jinx and the glediator work fine whit one arduino code you can find it at the Glediator webpage OR if you want use my sort code here a link for it: www.dropbox.com/s/prn84mjodi4iupp/PRTOCOL.ino?dl=0
Thanks :)
This video is useless if you don't share how you built your project with the community
this video made for competition not for education. If you want to.learn how.to.build it.there are planty of videos. but If you have any question ask me I try my best to answer it as good as possible :)
Connections please
maybe before you write a comment , search about 5 min on the internet to found your answer... i'm not your assistant to do all the work for you. and Im sure you can figure it out how to connect 3 cable... but im a nice person so here you go: lmgtfy.com/?q=led+matrix+connection+ws2812b