Boss !! thank you so much🙏🙏🙏 Coz my problems solved.thank you so much once again!!! I have changed d soft and now I have taken more than 600 copies without any problem.thank u so much 👍👍👍
@@patrickoliver3939 hi Patrick , please refer video link below , I have stated all the parts & parts number to be replaced ruclips.net/video/7Hx0I0kOaAg/видео.html
I've shifted my own several times but it keeps appearing after a few prints.....the floor is also well levelled. Please what could be the issue? Is it the ITB?
@@harrsaharris4475that picture only for you to see, if you are looking for that spare parts , you may refer to your local supplier . If you can’t find any, please email me, I can help
It maybe 1.wrong model toner inside, please use the correct one 2. Something wrong with the toner door, open the back at your machine , that’s a special tools for you to open toner door , try release it and close it back properly
Try observe the belt position 1.make sure it’s middle ,not askew a side 2. If error still appear… it might be the inner roller problem, try replace the inner roller
Error code E029-0003 refers to an ITB light intensity error. In this case, replacing the Feed Driver PCB along with re-seating connectors on the DC Controller and lasers resolved the error code and message. The part number for the Feed Driver PCB is FM4-9391-000
1. Check if the ITB Connector is physically removed. 2. Check if the cable of the ITB Unit is open circuit (including the inside of the ITB Unit). 3. Replace the ITB Displacement Control Motor (M14) and its Drive Assembly (the gear, Drive Shaft, Mounting Plate, etc.). 4. Replace the DC Controller PCB (UN1).
This its old way method bro..i can teach u easy way to fix this error code with out take out itb frame..and for sure can use for long last with out this error code appear again
Boss !! thank you so much🙏🙏🙏
Coz my problems solved.thank you so much once again!!!
I have changed d soft and now I have taken more than 600 copies without any problem.thank u so much 👍👍👍
Welcome boss ☺️
Super !!! Dobra robota :) Naprawiłem tym sposobem!
Good to hear that your problem is solved 👍🏻 stay tune in my channel , I will upload more tutorials
Hi,Dennis, C5045i，Error E000075-0003, 应该也是Transfer belt的问题，老是跑位，调整后，过一两周又跑位，需要更换哪个配件，我在吉隆坡，怎么联系你购买？谢谢
对啊…我也有面对过类似的问题，最终我换了inner roller，在itb belt 下方有一条小roller，整支换掉吧那就不跑位了
@@dennisthefatkid Hi,Dennis,从这里可以买吗？我给你发到邮箱了询问购买，没有邮件回复呢
@@tengtengcui1215 待会我回复你 sorry 最近有点忙
老板
如果那个belt移回了center过了一个星期后又跑位是什么问题？
Inner roller 壞了 ，你需要換itb 內的roller。如需要請聯絡我
@@dennisthefatkid i have the same problem. How can I change the inner roller?
@@patrickoliver3939 hi Patrick , please refer video link below , I have stated all the parts & parts number to be replaced
ruclips.net/video/7Hx0I0kOaAg/видео.html
I've shifted my own several times but it keeps appearing after a few prints.....the floor is also well levelled. Please what could be the issue? Is it the ITB?
Try this method
ruclips.net/video/7Hx0I0kOaAg/видео.htmlsi=h9BBmkqXbefQS_xp
@@dennisthefatkid thanks....my technician replaced the whole unit yesterday but I'll still check
J'ai réussi a le faire merci beaucoup
Welcome sir 🫡
Plz one mor video about save settings for favourite to access stored files
You meant the mailbox ? Store hard copy in copier hard disk and print later ?
@@dennisthefatkid yes ,if I try to copy front and back that is not working .it comes only single side
I try to change settings it was not change
Can I change settings instantly while printing
@@harrsaharris4475 you have to save the settings in machine or else it will back to default
@@dennisthefatkid one more question,, can I print double side in 250 gsm board at multi purpose tray
Dear sir am in a problem
If I changed d belt as well but after 10 or 15 copy the belt down again and Same complaint
You need to replace the inner roller as well, it’s inner roller grip problem
@@dennisthefatkid inner roller mean "soft or rubber" roller
@@harrsaharris4475 this item my friend
m.aliexpress.com/item/33030743869.html?gatewayAdapt=Pc2Msite
@@dennisthefatkid boss !Am in india but delivery options not available
@@harrsaharris4475that picture only for you to see, if you are looking for that spare parts , you may refer to your local supplier . If you can’t find any, please email me, I can help
thank you boss i solve my problem thank you so much. i have save AED 500
Welcome boss … 😎
THANKS
Welcome sir
HOW TO ORDER THE BELT AND GET IT SHIPED TO INDONESIA?
email to enquiry@dennisthefatkid.biz.my , we will contact you
e000025-04c0 A problem with the black ink, I changed it and the same malfunction, why?
It maybe
1.wrong model toner inside, please use the correct one
2. Something wrong with the toner door, open the back at your machine , that’s a special tools for you to open toner door , try release it and close it back properly
印了几百张之后 又出现这个问题 怎么办
换inner roller 吧
I do the same procedure but not work.. error show again and again what can i do...? Please reply.
Try observe the belt position
1.make sure it’s middle ,not askew a side
2. If error still appear… it might be the inner roller problem, try replace the inner roller
Okay bro thanks i try tomorrow.
Bro i have another machine model no. Canon adv 4025 do you have filmware?
@@rajanmasurkar7215 sorry I don’t have
How to remove error 000029-0003
Error code E029-0003 refers to an ITB light intensity error. In this case, replacing the Feed Driver PCB along with re-seating connectors on the DC Controller and lasers resolved the error code and message. The part number for the Feed Driver PCB is FM4-9391-000
better changed the blade as well.
It depends situation
👍
😎
Greet
thankyou
error 00075-001 please
1. Check if the ITB Connector is physically removed.
2. Check if the cable of the ITB Unit is open circuit (including the inside of the ITB Unit).
3. Replace the ITB Displacement Control Motor (M14) and its Drive Assembly (the gear, Drive Shaft, Mounting Plate, etc.).
4. Replace the DC Controller PCB (UN1).
E000075-0103 ?????
Try centre back your itb belt
@@dennisthefatkid Thank you, thank you, it has been repaired. I have another problem. Can you help me?
@@ahmedahmed-vu4il hi Ahmed, what’s the problem ?
This its old way method bro..i can teach u easy way to fix this error code with out take out itb frame..and for sure can use for long last with out this error code appear again
How
how to bro ? my printer is c5235i
Can you please share it how?
ruclips.net/video/7Hx0I0kOaAg/видео.htmlsi=h9BBmkqXbefQS_xp