Some say this fan has a higher pitch sound than a F1 V10 engine... And other say he is working in a resturant chopping vegetables... All we know is he is called the Blowie-Matron!
no practical application ? Lol i used these to cool the system, not to mention i injured my finger twice and its rpm was so much that its noise was more louder than my speakers BUT i put up a voltage regulator between it and my molex psu cables and wew it ran silent and cooled entire system. I still have like 10 of these and i bought each for Rs.50 or less than a dollar each from a local electricals shop , the guy brought a entire jute bag ( almost 100 KGs) filled with these from idk where,2nd hand yes but they were taken off from servers or the mobile cell towers .
In the situation that Linus is showing here, its completely impractical for 95% of users. Sure it works well, but who wants to sit next to a machine that sounds like a 747 taking off? Then again, its Linus, what hasn't he done thats impractical for most people.
And aren't that much louder, but of course can't lift an object as heavy a a PC. The point of this fan is to be small and still generate a lot of airflow- it cannot benefit from a large, optimally shaped propeller, because it has to fit in a server case, so it has to make up for it with speed. And pedestal or desk fans can have the same power and cause more airflow and less noise due to large, slow propeller. The blowie also has to be able to maintain a pressure difference, as the air has to go through heatsinks and possibly other components and dust, which obstruct the air flow, whereas neither a standing fan nor a quadcopter rotor has to do that as it operates in open air.
@@HaydenX this fan uses less than 5 amps, a good quality racing drone could use over 120 amps at 14.8 volts, as each motor is drawing over 30 amps, and plus all the other devices and inefficiencies of the motor drivers, etc.
I think dremels go past 30,000 rpm. Making a fan strong enough to hold itself together at that speed is likely the bigger challenge. The slow mo guys span a CD so fast it sent shards everywhere. I’d be scared to be near a fan even at 11,000 rpm
*puts on tinfoil hat* What if tornados are actually blowey matrons set up by the CIA and FEMA to enslave Americans and turn the freaking frogs gay? 🤔🤔🤔
Delta Fan Company: "We're proud to show you our brand new 11k RPM fan ! A lot of engineering came throught this projec-" Linus: *put food inside the spinning fan* Delta Fan Company : "WTF"
I have a 210 CFM fan that has higher static pressure than any 3 of my brothers RC planes combined. Shit is amazing. You can feel the draft through 4 radiators.
very largely because I was currious and I had them sitting around, but partialy because I was realy hoping I could do dual stacked radiators if I had high enough static pressure fans.
I used exactly this fan to cool my hp laptop. I used to put it in near the side vents of the laptop. Thermal throttle was reduced but playing games without using earphones wasn't an option. While I enjoyed gaming, people around me used to freak out. Now I put ice packs under the laptop, passive cooling under budget.
IF YOU PUT YOUR FINGER IN ONE OF THESE YOUR GONNA HAVE A BAD TIME, says linus as both him and his friend hold a cpu fan running at 11 thousand rpm without any hand protection.
probably not, the fan is really thick and if the radiator had 2 fans, you'd need around 9A of current for the fans alone. that's 108 watts just for the fans
To be fair, Dyson does make extremely high quality fans - not necessarily the final product though. Their hair dryer has a CNC machined and polished single-piece blade.
Ah yes, the infamous Delta fans. Back in my teen years my mates and I were actually kinda fascinated by these fans. "Dude, those Delta fans are apparently the most powerful fans you can get for your PC, but they're like super loud.:D"
For anyone interested... And still watching this video how many weeks/months later. That fan is using roughly 54.29 (if my math is correct) watts of power under full load! For a FAN! that's absurd!
have two of these at home, they can fly! been intereseted of buliding som kind of rc hoovercraft with them. Will never put them in my home pc because of extremly noisy
'typical fidget spinner'... yeah I doubt my metal spinner made out of one block of metal would come apart at that speed but w/e it's not like I could ever get it to spin that fast anyway.
That would be a good fan if you added in a fan controller for it just to turn it down just enough to keep the cpu cool and get rid of the stupid noise. I love jay2cents but speed fan sucks it only lets you really lower your fan speed to 50 percent and even that is stupid loud. Now with a fan controller my fans run pretty fast but they are also quite. I run them from 1500 to 1800 rpm and my pc is so much quieter than when i was running it on speedfan.
Idaho Custom Computer I used one of those on a P4 EE back in the day - yeah, it did keep the temps manageable :D Intel's delusion that they would somehow ever hit 10gHz on Netburst and miraculously keep it cool remains one of the most amusing parts of PC history to me.
I remember one of my first heatsinks back in the AMD Athlon XP 1600+ days was the Thermalright SK-6 w/ 60mm Delta fan. What a screamer. Man the money I have spent on aftermarket coolers in the last 20yrs since I first started building PC's. So far my favorite is the Prolimatech Megahalems. Best designed mounting hardware, effortless no strain installs. I kept that cooler after not being able to use it on all my AM4 updates to my PC's. Hoping at some point there will be a use for it with maybe just maybe going to Intel again in the future and if the coolers will still be capable.
I'd suggest that the increased pressure let's the b-m push more air more effectively through the thin gaps in the dissipation fins, meaning the actual average air speed across all fins may have increased significantly more than by a factor of 3.6... I approve this science! Also, late to the party, I know.
Yeah that is true like I'm sure a lot of people haven't tried this either but the same concept applys to air conditioning too. You can try this in your car like how linus said you get less cooling the more air is rushing by due to thermal dynamics. In ac in your car in fact the coldest your ac will get is it being on low. The reason behind that is because the longer air is in contact with the exchanger in these cases the heat sink and the evaporator core of a car the more effective it will be on heat transfer. So indeed yes it's worse moving more air by a heat exchanger because thermal dynamics can't over come the velocity of the air. Now if you are able to increase volume and keep velocity down which is probably impossible I think maybe just maybe it will be better unless.....they find out how to put a mini ac unit on a cpu and cool it that way lol.
If you install Synergy on two PCs and both of them have a mouse, what happens when you drag the first PC's cursor to the second PC? Will it have two cursors on screen or will it just take control of the second one?
Just take control of the other one. Say I have my pc and a laptop. The pc is the host. I move the mouse on my pc to my laptop and it works normally. If I try to move my laptop mouse to my pc it will not move over. Watch Linus' review for more information. :P
ReverseHeart03 Depends on which is running in server mode and which in client mode. The server PC will go offscreen and control any adjacent client PCs. Client mice will stay on their respective monitors.
Btw, be careful of what Synergy advertises (and linus in the end): the drag and drop feature doesn't work yet. I baught the "pro" version, also because of the coupon LTT provided, and I feel frustrated because it's still advertised as having the drag and drop.
I have 3 of these, attached on 3x92mm radiator. Idle around 6-10% these are quite quiet. But when i need the performance, oh boy.. I paid 72 euros combined for the bloweymatrons, that makes 24 euros per bloweymatron.
You've never felt or heard a high CFM fan until you've owned or worked on a Dell Optiplex GX280... Those damn things are turbine engines - without the combustion..
Boeing don't make turbine engines. What you want is the main fan from a GE GE9X, world's largest jet engine. It will cost a pretty penny though, like 1000x the cost of one of these fans for a single GE9X blade or something.
Did something like that with a 92mm x 25mm delta fan on an L9i for an ITX build once. Needless to say that it worked but the noise was occasionally ridiculous.
My fan is so powerful, it needs a fan to cool it
If this video was released today, this comment would have 10K likes
And the cooling fan needs a fan to cool it :3
Let's water-cool fan
@Code Ultimate Air cooling will not be able to beat liquid cooling as long as the liquid cooling is done right
just water cool the fan
"It is the most expensive blow I've ever gotten."
- Linus 2017
1402 News yes
y e s
Two meanings
@@HoloScope AND NEITHER OF THEM ABOUT COMPUTERS.
Good thing I wasn't the only one thinking dirty 😂
"$55 - The most expensive blow I've ever gotten"
Damn linus who's your dealer
Yvonne lol
And there's the other meaning that also has nothing to do with computers....
FTVG inc ....
@@FTVG_inc You mean blow as in blow or blow as in blow?
@@LeNomEstYves blow I think?
2017: 11000rpm fan cool stuff
2079: 30000rpm fan that heats the component out of air friction
Have u heard of jet engines that existed before 2017
Lol
@@deluxesofa they heat by burning fuel and not friction
@@anandsuralkar2947 I don't know. A guy on RUclips says they run on compressed air. I kind of believe him
@@timmanboy1 really?
"This thing not only spins faster than the engine of my civic , it probably has more torque too"
I DIED HAHAH
Rick Asttley VTEC kicked in
Yo
Will it fit in my Honda?
When the vtec kicks in for that fan the air pushed makes the earth spin faster
Some say this fan has a higher pitch sound than a F1 V10 engine...
And other say he is working in a resturant chopping vegetables...
All we know is he is called the Blowie-Matron!
MackisLife most underrated comment ever !!!!! 😂😂
"Make sure to rev to 11,000 rpm." - Bunta
Finally, I found Initial D comment.
Haaa
Taco meat likes to blow them 4ages
@@boktorinator693 aa Türk çıktı ahahaahajah
Remember Honda Civic eg6=chaeter
*very expensive cooling fan*:shoves A carrot into it.... typical
RC Epicness Only in LTT ,where dropping expensive products and destroying stuffs are the norm.
RC Epicness It ain't gonna stress test itself.
It's even funnier at half speed.
Yeah, why not?
its the fan that was used in the hoverboard in bact to the future
1:52
Oh ya know, just 2 grown men shoving bananas into a fan.
As you do.
and making bank while doing it ;)
I really want to put my finger in the blades
@@hibuddy1473 why
a Idk
@@hibuddy1473 >.>
This is a classic LTT video and exactly the reason why I once subbed. No practical application in the real world but damn interesting!
no practical application ? Lol i used these to cool the system, not to mention i injured my finger twice and its rpm was so much that its noise was more louder than my speakers BUT i put up a voltage regulator between it and my molex psu cables and wew it ran silent and cooled entire system. I still have like 10 of these and i bought each for Rs.50 or less than a dollar each from a local electricals shop , the guy brought a entire jute bag ( almost 100 KGs) filled with these from idk where,2nd hand yes but they were taken off from servers or the mobile cell towers .
they are server fans, mine has an IBM part number sticker on it . lol
mine looks exactly like linus's . And to think i got it for Rs.50 and Rs. 66 = $1 . LMAO
No. These are server fans. And I'd say that's a pretty good practical application.
In the situation that Linus is showing here, its completely impractical for 95% of users. Sure it works well, but who wants to sit next to a machine that sounds like a 747 taking off? Then again, its Linus, what hasn't he done thats impractical for most people.
Considering your propensity for dropping things, I'm surprised nobody got an impromptu circumcision.
Lmao
Underated
Bout to let it rip like mufuckin beyblades
HAHAHAH
I was afraid for their fingers
Linus, who cares about formulas and shit. Just stack up 10 of these in case and make it a quadracopter. See if it can fly
Good idea!
A 50 amp quadcopter would be stupid. Most quadcopters use the same current as one of these fans at full load.
And aren't that much louder, but of course can't lift an object as heavy a a PC. The point of this fan is to be small and still generate a lot of airflow- it cannot benefit from a large, optimally shaped propeller, because it has to fit in a server case, so it has to make up for it with speed. And pedestal or desk fans can have the same power and cause more airflow and less noise due to large, slow propeller. The blowie also has to be able to maintain a pressure difference, as the air has to go through heatsinks and possibly other components and dust, which obstruct the air flow, whereas neither a standing fan nor a quadcopter rotor has to do that as it operates in open air.
@@HaydenX this fan uses less than 5 amps, a good quality racing drone could use over 120 amps at 14.8 volts, as each motor is drawing over 30 amps, and plus all the other devices and inefficiencies of the motor drivers, etc.
Wouldn't 10 make it a decacopter?
3:21 oh damn Alex has changed a lot. Didn't even reciognize him at first
"Oh we finally stopped it. Jammed full with Carrot"
-Linus Tech Tips (2017)
Sam Goldstein that poor girl 😢
Sam Goldstein y tho
It was only unplugged
Just like my civic
"Hey guys, what if we just put some fan blades on a dremel?"
That's an LTT build idea if ive ever seen one right there.
Neat idea. I've got a cordless one that spins up to 30,000RPM. It outta move some serious air at that speed.
I think dremels go past 30,000 rpm. Making a fan strong enough to hold itself together at that speed is likely the bigger challenge. The slow mo guys span a CD so fast it sent shards everywhere. I’d be scared to be near a fan even at 11,000 rpm
I actually tried it once. It was worked like 2 seconds, and then exploded nearly in my eye. Dumb way to be blind.
@@suruadamable and that is why protection gear like glasses and face mask are important when doing dumb shit
Blowey matrons:
- Sound like a tornado siren
- makes tornadoes
*puts on tinfoil hat*
What if tornados are actually blowey matrons set up by the CIA and FEMA to enslave Americans and turn the freaking frogs gay? 🤔🤔🤔
Blowie
"More torque than my Civic"
Goddammit Linus
*Honda has left the chat*
Similar RPMs to Boeing 777 engine...✈️✈️✈️✈️✈️
When a fan is faster than your Hard Drive
;-;
Lol
What does that symbol mean?
TechnoTiger it's a crying emoji thing. This is 2018 u should know this
I never understood that particular emoji lol
get a ssd
Still quieter than my ps4 fans. Smh
Huzufu true
Huzufu it's quieter
at least you tried.
Huzufu naaah no worries
Jose Rios Over what? I'm confused...
"Are you sure it's on I can't hear a thing"
"It's Wisper quiet"
I literally rewatched that episode today. Spooky.
Delta Fan Company: "We're proud to show you our brand new 11k RPM fan ! A lot of engineering came throught this projec-"
Linus: *put food inside the spinning fan*
Delta Fan Company : "WTF"
"I void warranties" now that's a techie T shirt
I want this one!
yup the first pic was a fkn turbo. any of you have a fkn turbo in your computer?
"It is the most expensive blow I have ever got"
~ Linus 2k17
He's going places..
IAmZylon + his banana got destroyed
*That moment when your computer fan can propel a small airplane*
I have a 210 CFM fan that has higher static pressure than any 3 of my brothers RC planes combined. Shit is amazing. You can feel the draft through 4 radiators.
why the fuck do you have 4 radiators stacked on one another?... THAT's the real question.
Sounds like a good youtube vid
very largely because I was currious and I had them sitting around, but partialy because I was realy hoping I could do dual stacked radiators if I had high enough static pressure fans.
lol. literally i am cracking up
I was just studying for my thermodynamics exam, and I wanted to take a break and watch some youtube videos. Thanks Linus.
did u pass it??
3:21 I died after reading Alex's shirt XD
That killed me
He voided your warranty
@@Mycatisinapiano What a weird way to refer to taking someone's virginity
kLowN r/whoosh
@@MrCasebi rip
"The most expensive blow Iv'eeee ever gotten." - Linus 2017
because i charge 50 for a blow
I've often wondered if this is referring to sex or cocaine. Maybe both
You cant get blow for 55$ so he must mean a BJ
Linus has never gotten blown by his wife confirmed
Normal fans have more torque than your civic Linus ;)
FrameDYN Sketchy heatsink 2 has more torque
sniperunrepeat i use civic engine as generator for my ls
Chopped!
*Lambo
Just wait until the VTEC kicks in yo.
“$55 is a lot”
Corsair: hold my beer
This comment hurts.
Does it come with a gear box and shifter
You wish
It comes with a PWM header, so maybe you can attach a DSG secuential to it.
@@spidercubed9718 and you missed the joke.
r/woooosh
there it is, flying over your head. good job, dumbass
@@spidercubed9718 yeah it was a joke but they clearly understood it
@@spidercubed9718 you thought he wasnt joking because you don't know enough about cars to understand what a sequential is lmao
Holdup are we just gonna pretend Linus' hand doesn't have 8 fingers in the thumbnail?
Jon Overstead
There's a second hand behind him holding up a second fan.
Isn't that fantastic?
obvious_humor your dumb it's the same fingers copied
obvious_humor do you have two left hands lol?
It's the same hand...
idiot
Get 50 of them and make a hovercraft.
You mean a space ship?
Kablash you mean a gyroscopic anti gravity generator?
Damn
Damn
Damn
I used exactly this fan to cool my hp laptop.
I used to put it in near the side vents of the laptop.
Thermal throttle was reduced but playing games without using earphones wasn't an option. While I enjoyed gaming, people around me used to freak out.
Now I put ice packs under the laptop, passive cooling under budget.
IF YOU PUT YOUR FINGER IN ONE OF THESE YOUR GONNA HAVE A BAD TIME, says linus as both him and his friend hold a cpu fan running at 11 thousand rpm without any hand protection.
I was getting panic attacks here just watching that.
@Potato #1 That's only true for high-torque applications like lathes. Get a glove in this fan and it stops.
@@CyBeRiun yes... But no.... You can't really touch the blades unless you want it
That means you going to have a nasty cut on your finger
At the beginning he nearly got his fingers in thr fan
So this is why Server Rooms are noisy as fusck.
Server fans spin at 10,000 rpm
Perhaps
@@Dave-dh7rt not all of them, my 130mm fans spin at "only" 5k rpm
manaquri lol, i had an HD5770 and that blower spun at 4,200 RPM...
Meanwhile my Noctua Case Fans spin at 900 rpm. Can barely hear them
"This thing not only spins faster than the engine in my Civic, but probably has more torque too" as a proud Civic owner I can confirm this.
EF_Wagon why dont you just attach multiple fans onto your flywheel
"This not only spins faster than the engine of my Civic, it probably has more torque too" I died immediately xD
1:18 "This video is sponsored by Satan"
Lmao what the hell😂
ulph97 i noticed that too
To get better numbers for your pc, you need to sacrifice your soul to satan
glad I wasnt the only one who noticed lol
wtf. that happened random?
"It is the most expensive blow I have ever gotten."
LOL! You made me laught so much. :D
Jan Dudiňák laught yea i not sure if it's a word
Jan Dudiňák imagine getting one thinking it's normal then having a pc that only makes it go at full force, sound for dayyyysssss
blooooow
Could you guys put together a custom watercooling loop with Blowie-Matrons occupying all of the radiators?
probably not, the fan is really thick and if the radiator had 2 fans, you'd need around 9A of current for the fans alone. that's 108 watts just for the fans
its not that bad... only 108 watts....
It's been done with a 12 fan rad.
You're going to need a separate power supply for the fans
@@paulniziolek9200 that's almost 2 times the power delivered by my laptop power brick
I didn’t realize I was watching an episode of “Will it blend.”
$50 fans? Time for Dyson to make case fans too now
CloakedCedric lol "fanless computer case fans"
Where I'm from, all fans are the equivalent of $50...
To be fair, Dyson does make extremely high quality fans - not necessarily the final product though.
Their hair dryer has a CNC machined and polished single-piece blade.
id buy them
Prove that it blows it's own dust out, and I'm sold.
Finally, something that'll bring my FX 9350 below 90C.
how many of those for 4 way GTX 480 sli?
As much as you can fit in your case
If you run it on a testbench just fill your room with them
MemeTast1c: AMD joke?
isn't it supposed to shut down around 75 degrees? its safe max temp is like 65 degree iirc
"Most expensive blow ive ever gotten" - Linus, June 10 2017
*June 3,2017.Floatplane club ftw.
Wait so is that blow as in a blowjob or blow as in cocaine? Or.. Perhaps both at the same time? I'm confused :(
He said it like you would say for the drug, and meant it as in blowjob.... He's a techie.
bit of both ;)
Blowjob. And I have had worse pleasure/dollar
”this thing not only spins faster than the engine of my civic, it probably has more torque too”
lmao
That alarm clock scene was amazing 😂😂
"Most expensive blow"
i was looking for you!
#linussextips strikes back...
dyzio2206 click on that # you put and look at the results 😂😭😂😭
"10/10 would buy again"
"At $55 it is the most expensive blow I've ever gotten." -Linus 2017
to be honest, some women have to go on lots of dates before they feel comfortable. those 55 bucks go away fast, so the joke may not entirely work
Since it's _probably_ a *"C17H21NO4"* related joke, it kind of did :)
but its not RGB!!!
Me: thinking about buying one of those.
My pc: are you going to put me into the orbit?
I'd just put a airplane engine in my gaming pc
TechBoy you don't have a gaming pc
Bro yes I do. It has amd 10 and a gtx1070
TechBoy Umm you'd be adding heat
So I work on turbine engines. That exhaust is ... hot as fuck.
Benjamin put the engine on the exhaust of the pc to make a ridiculous negative air pressure inside the case.
$55, the most expensive blow I've ever gotten. quality internet video.
It's one of those moving pictures.
Ah yes, the infamous Delta fans. Back in my teen years my mates and I were actually kinda fascinated by these fans. "Dude, those Delta fans are apparently the most powerful fans you can get for your PC, but they're like super loud.:D"
0:52 - Linus's wife should be worried
Actually, Linus should be worried
YOU DID THE 'S THING WHERE IT SHOULD BE S' YOU NUB
And without a full stop.
"most expensive blow I have ever gotten" -Linus 2017
For anyone interested... And still watching this video how many weeks/months later. That fan is using roughly 54.29 (if my math is correct) watts of power under full load! For a FAN! that's absurd!
have two of these at home, they can fly! been intereseted of buliding som kind of rc hoovercraft with them. Will never put them in my home pc because of extremly noisy
That is probably why immersive cooling is gaining more attention. cost of ownership...
Nowhere near as good as my 99999 RPM fidget spinner I use for cooling.
It's been established that a typical fidget spinner comes apart at ~20000 rpm, and a special, large, atypical fidget spinner, not much more.
Mikℯ Kℯn† Cletus McFarland proved that a 900 psi nitrous bottle will destroy a fidget spinner. XD
'typical fidget spinner'... yeah I doubt my metal spinner made out of one block of metal would come apart at that speed but w/e it's not like I could ever get it to spin that fast anyway.
It was a joke, lol.
honda s2000 owners: hold my beer
Read Alex's shirt 😂
@@bobbycatgt70 at what time I couldn't find it
@@berkee3586 3:21
@@Ameera-l6l holy fuck hahaha
Mazda RX-7 owners: hold mine, too
"There's the way it says in the manual and there's the Linus Tech TIps way."
-Linus S (smiling profusely)
That would be a good fan if you added in a fan controller for it just to turn it down just enough to keep the cpu cool and get rid of the stupid noise. I love jay2cents but speed fan sucks it only lets you really lower your fan speed to 50 percent and even that is stupid loud. Now with a fan controller my fans run pretty fast but they are also quite. I run them from 1500 to 1800 rpm and my pc is so much quieter than when i was running it on speedfan.
I'm a _fan_ of this video because it's _cool_
LOL
So cheesy. I love it
Dunno man I think it blows.
I was going to make the extact same pun.
QB Mac in this CASE this pun is pretty COOL
Actually that PSU can do 10 amps, not just 5 since its a dual PSU you can run it in parallel with the two switches on the front.
Haha. Non-Electrical Engineers are afraid of putting PSUs in parallel or in series. This is magic they don't understand :)
TigerChills well, as long as you got reverse voltage protection......
Oh ok, figures...
I’m gonna remember “blowiematron” for the rest of my life for some reason it brings me joy
1:50-2:05 Close your eyes and just imagine.
Yeah
Poor choice ofwords, there.
I used to be a fan...
i'm now an air conditioner.
I used to be a pie...
I'm now a cow.
But what is an air conditioner? Find out in the next tech quickie episode!
I used to be nokia 3310
Im now a Samsung note 8
I used to have a stomach ache.
But now I took a dump.
rawr
rawr
Can you do a 4 of this in a H100i push pull ? and compared with stock fans :P
genius lol
“And at the price of $55, this is the most expensive blow I have ever gotten”
-Linus (tech tips) sebastian of Linus media group
Didn't we all agree to only buy rgb products?
But rgb products go very well with a nice little fan
More torque than his civic
I died
Finally! Something that will keep my pentium 4 3.4 GHz below 155c!
Yes I made that joke
Idaho Custom Computer I used one of those on a P4 EE back in the day - yeah, it did keep the temps manageable :D
Intel's delusion that they would somehow ever hit 10gHz on Netburst and miraculously keep it cool remains one of the most amusing parts of PC history to me.
Idaho Custom Computer Im rocking a 9590, chill out thinking your Pentium 4 is a furnace.
ayyy my pentium d 940 is running at 95 (probably higher tbh, sensor cucked possibly ) all the time
Schools with slow PC’s: ILL TAKE YOUR ENTIRE STOCK
I miss my passively cooled 486. That thing could run DOOM, and *almost* Duke Nukem 3D.
A Roadie Almost?
My girlfriend has 7.3 amps of blowing power.
Hahahahha
Linus knows a lot about blowing
I remember one of my first heatsinks back in the AMD Athlon XP 1600+ days was the Thermalright SK-6 w/ 60mm Delta fan. What a screamer. Man the money I have spent on aftermarket coolers in the last 20yrs since I first started building PC's. So far my favorite is the Prolimatech Megahalems. Best designed mounting hardware, effortless no strain installs. I kept that cooler after not being able to use it on all my AM4 updates to my PC's. Hoping at some point there will be a use for it with maybe just maybe going to Intel again in the future and if the coolers will still be capable.
I burst out laughing at the girl screaming at then end!!! xD
jebdian kerman no it isn't lol
Ehhh who is it?
jebdian kerman maxine
Ur mom i think
I don't think that's something to laugh about..
Thx for the banana for scale
9gagger spotted
North Korean genocidal maniac spotted.
It was an African banana, if that helps.
also unladen
what? my fan rpm? ITS OVER 9000!
i was disapointed that linus didnt made a over 9000 joke
dead meme
F*ck Google its kinda a meme but more of a quote
Not only a dead meme, its even incorrect...
MiChAeLo KGB yeah i know that its actually 8000, but more people know it as 9000 so thats what i use.
I'd suggest that the increased pressure let's the b-m push more air more effectively through the thin gaps in the dissipation fins, meaning the actual average air speed across all fins may have increased significantly more than by a factor of 3.6... I approve this science!
Also, late to the party, I know.
nobody:
My Computer *Not joking*
***747 NOISES***
Perfect for flight simulator
I wouldnt put my banana into that blowie
where... is.... my.... SCRAPYARD WARS!!!
sunday
Billie Joe that's today
Spook it is for us grennich mean time folks
If you watched the most recent Wan Show you would know when it is going to be posted.
r/vesselrips
0:04 That unrecognizable dude
The CPU will overheat when the HSF gets ripped off the motherboard.
Hey, Vsauce linus here
Joseph Mampaey Hey, Vsauce linus here safety is number one priority
PcGamerHD That's a bit too much!
Kain Bastien wassup vsauce,Linus here,and velcomback to MuhLuhBuhToree ver saftee is numba one pyoyitee n tooday
Joseph Mampaey Where are your fingers?
hahaha MindBLOW
pause at 1:18 ... look at the numbers...
ToadAwesome12 uhhh
ToadAwesome12 illuminati confirmed
Nice
ToadAwesome12 wtf linus is the anti Christ
He did that in the other video
Yeah that is true like I'm sure a lot of people haven't tried this either but the same concept applys to air conditioning too. You can try this in your car like how linus said you get less cooling the more air is rushing by due to thermal dynamics. In ac in your car in fact the coldest your ac will get is it being on low. The reason behind that is because the longer air is in contact with the exchanger in these cases the heat sink and the evaporator core of a car the more effective it will be on heat transfer. So indeed yes it's worse moving more air by a heat exchanger because thermal dynamics can't over come the velocity of the air. Now if you are able to increase volume and keep velocity down which is probably impossible I think maybe just maybe it will be better unless.....they find out how to put a mini ac unit on a cpu and cool it that way lol.
If you install Synergy on two PCs and both of them have a mouse, what happens when you drag the first PC's cursor to the second PC? Will it have two cursors on screen or will it just take control of the second one?
Just take control of the other one. Say I have my pc and a laptop. The pc is the host. I move the mouse on my pc to my laptop and it works normally. If I try to move my laptop mouse to my pc it will not move over.
Watch Linus' review for more information. :P
ReverseHeart03
Depends on which is running in server mode and which in client mode. The server PC will go offscreen and control any adjacent client PCs. Client mice will stay on their respective monitors.
Btw, be careful of what Synergy advertises (and linus in the end): the drag and drop feature doesn't work yet. I baught the "pro" version, also because of the coupon LTT provided, and I feel frustrated because it's still advertised as having the drag and drop.
"my most expensive blow ever"
He only pays cheap ho s
Josef Aschwanden When he said my most expensive blow he was referring to cocaine r u dum tho
f16 simulator included
I have 3 of these, attached on 3x92mm radiator. Idle around 6-10% these are quite quiet. But when i need the performance, oh boy..
I paid 72 euros combined for the bloweymatrons, that makes 24 euros per bloweymatron.
Writing velocity as V instead of v. This hurts my inner engineer.
"Delta T change" hurts, too
Why does Delta T hurt? Yes, it should've been Change in T, or Delta T. I suppose your objection is that what he said was Delta squared T.
my objection is that its redundant and unnecessary. You wouldn't say "the change in temperature change."
Delta means change so they're basically saying change in temperature change.
yes you would if you're taking deltaT's derivative :P
Who need notification if you watch RUclips 24/7
People that don't go on RUclips 24/7
gamarmandan Thanks Captain Obvious
You're welcome.
The truth hurts
#nolifesquad
Love the shirt though.. "I void warranties" :-D lol
Legend says that in an ancient scroll found in the sun warriors temples it says, if the fan blows hard enough it could blow Linus’s ego away .
Ouch that roast LOL
$55 carrot grater.
Paper concidering the price of some As Seen on TV gadgets $55 for a carrot grater doesn't sound that crazy.
This episode is......fan-tastic.
This is a strange episode of Scrapyard Wars
Probably because it is not Scrapyard Wars.
Jason Wise when you take his sentence too seriously
Lol that side panel joke got me 😂
You've never felt or heard a high CFM fan until you've owned or worked on a Dell Optiplex GX280... Those damn things are turbine engines - without the combustion..
npsit1 even the cfm leap could be quieter
tru dat
Looks like a good product but sadly I couldn't hear what you said over the noise of my computer fans.
I just strap a Boeing plane turbine to my computer
Egg. Cool good for you
But the exhaust gases are to hot
Boeing don't make turbine engines. What you want is the main fan from a GE GE9X, world's largest jet engine. It will cost a pretty penny though, like 1000x the cost of one of these fans for a single GE9X blade or something.
That would burn your computer lol jet exhaust is burning hot
Ryan you can just put it in the bypass
Did something like that with a 92mm x 25mm delta fan on an L9i for an ITX build once. Needless to say that it worked but the noise was occasionally ridiculous.