Yes, exactly, could you please email me a few pictures of the built-in parts ?! where you installed which parts so that the CG is correct! which batteries you have installed and where they are located! that would help me a lot with my construction! Thanks Peter
@@rcwarbirdsnc1734 Good to hear, seems. Like it’s a very delicate balance of leaning out the carb enough to get 3 to fire. I’m considering rotating the 250 on a stand to break it in more evenly. Good luck with the 180!
Dear RC have you already tried to send me pictures? Unfortunately I have delivery problems with the Moki 180! Could you please send me pictures of the RC internals in the fuselage?!
hello i'm peter from austria and got this TopRC P47 2 weeks ago! I would also like to install the Moki 180, does it fit under the hood without changes from the firewall?
Fits perfectly with NO changes to firewall. Mounts directly with NO stand-offs or build out of firewall. Some helpful hints when building your P-47. 1. The Moki 180 may have some issues with the electronic ignition (Blue Box). I had trouble with mine. No spark on Cylinder #3. Purchase (Rainbow) aftermarket electronic ignition. Do not use included ignition or you may be starting over. Dismounting engine, etc! Also, you must purchase fuel pump. This engine will not run without the fuel pump contrary to some claims that it is not needed. 2.. Do not mount tail gear at Manufactures location. That location does not allow for enough ground clearance for your gear doors on grass. Your tail gear doors will be torn off! Mount tail gear as low as possible to maximize grass clearance! 3. Ailerons will rub flaps when flaps are in down position. Some adjusting / filing may be required to prevent this. Also you do not need 100% travels on ailerons in down motion. Set down travel to 60% to prevent rubbing and go from there. The plane is a gentle GIANT and flys great! Lands Sooooooo softly and smooth! Easy to fly!
beautiful sound
Nice. When my wife tells me i have expensive hobbies, i will show her this. Happy flying
😂😂😂👍
Beautiful plane. Love the P-47!
I love the wow for moki power
Nothing like the sound of a radial engine!
That sounds nice!
Awesome job beautiful airplane
Sounds great! Looking for a 180 for my hellcat but everyone seems to be out of them.
That's freakin' awesome with the 4 blader. Have you flown it yet with the 4 blader and if so, how does it fly?
Sounds good Razorback are the best, does it fly good
So good
👍👍that was so cool
Yes, exactly, could you please email me a few pictures of the built-in parts ?!
where you installed which parts so that the CG is correct!
which batteries you have installed and where they are located!
that would help me a lot with my construction!
Thanks Peter
What electronics do you use? Jeti?
Hi
would you be so kind and tell me the wingspan of your awesome P-47?
Is it the P-47 from TopRc Modellbau 2400mm?
Outstanding shipmates. Press on. USS Kitty Hawk CV-63. Jan 1980 to July 1983. Rc`er for life.
Does Moki make a dual row radial engine?
Do you have to do a lot of adjustment to the aircraft to make this engine fit? Also in weight?
No adjustments. Fits right to firewall
Nice Jug looks awesome! I’m putting the DS5 in a Moki 250. Are you happy with new ignition? Any suggestions?
New ignition seems to work flawlessly. Immediately solved my issue of #3 coil not firing
@@rcwarbirdsnc1734 Good to hear, seems. Like it’s a very delicate balance of leaning out the carb enough to get 3 to fire. I’m considering rotating the 250 on a stand to break it in more evenly. Good luck with the 180!
Dear RC have you already tried to send me pictures?
Unfortunately I have delivery problems with the Moki 180! Could you please send me pictures of the RC internals in the fuselage?!
Hello, sound marvelous
I’ve just receive mine…and not planified for the engine
Can I ask you the diameter of the Moki 180??
Thanks
I can’t remember. Fits perfect. Most people are going with this or the UMS 150
WOW 👍🤟
hello i'm peter from austria and got this TopRC P47 2 weeks ago! I would also like to install the Moki 180, does it fit under the hood without changes from the firewall?
Fits perfectly with NO changes to firewall. Mounts directly with NO stand-offs or build out of firewall.
Some helpful hints when building your P-47.
1. The Moki 180 may have some issues with the electronic ignition (Blue Box). I had trouble with mine. No spark on Cylinder #3. Purchase (Rainbow) aftermarket electronic ignition. Do not use included ignition or you may be starting over. Dismounting engine, etc! Also, you must purchase fuel pump. This engine will not run without the fuel pump contrary to some claims that it is not needed.
2.. Do not mount tail gear at Manufactures location. That location does not allow for enough ground clearance for your gear doors on grass. Your tail gear doors will be torn off! Mount tail gear as low as possible to maximize grass clearance!
3. Ailerons will rub flaps when flaps are in down position. Some adjusting / filing may be required to prevent this. Also you do not need 100% travels on ailerons in down motion. Set down travel to 60% to prevent rubbing and go from there.
The plane is a gentle GIANT and flys great! Lands Sooooooo softly and smooth! Easy to fly!
Does she know how much money you have in that thing?
Yes….I have many.😅
You think we're trailing the Germans and the English in RC? Take a look at this!
boring not a german bird