Do you ever adjust the BOV's after install? Mine came from EVO set all the way in the hardest setting, just wondering if there is are pro/cons to going to a softer setting. Thx, great vids
Your videos help a lot follow and watch all the time, just had a question did your down tube and main charge tube touch installed on my 2021 x3 and didnt know if that's ok not a lot of room to move stuff around. Also had to move heat plate for exhaust was to close to tube. Thanks for the videos.
Love the content man, keep it coming. What’s that black box next to the cat with the wire going into it next to where your friend was tapping/showing for the exhaust? Aftermarket or no? My 2020 doesn’t have it.
Another tight video! Keep em coming. One thing, does that shock tower light bar and those 2 pods provide enough light for night rides? Whats the set up? XL80's and a Onx6?
We have not found the answer to that question. At Glamis during a nite ride one of the pod connectors failed.. also we just got and amber cover for the tower light. Plan to test very soon
@@GLifeUTV my brother just dropped a video on his RUclips where he gives my mom a ride in it check it out you can hear it his channel is called “Purobailando”
Hey frank ive this setup now for a few trips, Badass totally turns heads. But what is the proper setting for the bov? I notice if you twist the valve it has some adjustment as far as release. What do you recommend?
The tighter the adjustment the later it will blow off. The looser( less spring pressure) the earlier it will blow off. Do not loosen it to the point where u can see the o ring. Personally i just leave it almost full tight
I just installed mine on a 21 x3 RR and I have double checked the tightness of all the clamps but I think I can hear the blow of valve constantly on while driving at moderate speeds with the accelerator on. When I gun it and let off it sounds like it’s working perfect. Should I hear it while just driving sometimes.
Most aftermsrket charge tubes like the one you see here, have a port for the bov. That factory does not . Also they are higher quality can hold more boost with the more robust clamps
"Is your car quiet? does it not make enough noise?" said no x3 owner ever. 😂 I have charge tubes and a BOV on mine and love it, but he whining of the clutch still drives me nuts to this day. Lol
@@GLifeUTV Thx for your response man i still have about 5 months left on my warranty and since installing an aftermarket market part voids the warranty i wanna make sure i install something Reliable
Absolutely the best video on this topic! GREAT JOB.. I'm doing this same setup on my 21 machine and you made it a no-brainer.
Great work!
Thanks bro🤙
Hey Frank ! You did a really clean Video 😎 like the extra funny stuff on top of a
Great explanation of the install 👍🏻
Thank you bro🍻
The only f'n video I could find that shows that little hanger bracket and how it comes off! Thank you!
🫡🫡🫡
Love the vid bro! You guys rock at explaining installs I just bought the evo shocker and belt temp Guage for my 2021 turbo rr
Thanks 🤜🤛👍
👌🏼haven’t installed mine but now I have an idea ... awsome video keep them coming !!
Thanks bro, i want one now too
Like always great job ,thank you sir !
That was a very good video! Very informative and hilarious
Thanks 🍻🤟👍
Thanks for the video bud, very good step by step, now I got some wooosh!
Thanks for watching 🤜🤛
Love that sound brother
Me too, im a lil jealous of these guys.😁
Oh yeah, great video
👌👍
Another great video and tutorial by Frank G.
😎🍻
I think you missed neutral JAAJJAJAJAJ . Dope vid frank
Haha heck yea i did😂😂😂😂
Espectacular 🤩
😎
That’s dope bro
🙏👍
Love can am
Do you ever adjust the BOV's after install? Mine came from EVO set all the way in the hardest setting, just wondering if there is are pro/cons to going to a softer setting. Thx, great vids
Thanks bro, great video I'm doing that to mine.
Its badass.. i want it on my car too
Timmy peeking through 🤣😸
Lol😂
Your videos help a lot follow and watch all the time, just had a question did your down tube and main charge tube touch installed on my 2021 x3 and didnt know if that's ok not a lot of room to move stuff around. Also had to move heat plate for exhaust was to close to tube. Thanks for the videos.
The silicon tubes , coolant hoses can touch, it wont be any issue..
Your not kidding it’s a money pit !!.. still gonna get mine in feb haha....
💸💸💸💸when u own one.. seems like all ur cash has wings and flys away🤣🤣
Love the content man, keep it coming. What’s that black box next to the cat with the wire going into it next to where your friend was tapping/showing for the exhaust? Aftermarket or no? My 2020 doesn’t have it.
It was a rock light bro👍
Another tight video! Keep em coming. One thing, does that shock tower light bar and those 2 pods provide enough light for night rides? Whats the set up? XL80's and a Onx6?
We have not found the answer to that question. At Glamis during a nite ride one of the pod connectors failed.. also we just got and amber cover for the tower light. Plan to test very soon
You need these. Lisle 30800 CV Boot Clamp Pliers
Thank you sir. Placing order now👌👌 appreciate it.. accept virtual beer🍻🍺
We just installed a HKS bov on my brothers can am it sounds super loud 💯
Nice.. now im wondering how loud that is🤔👍👍
@@GLifeUTV my brother just dropped a video on his RUclips where he gives my mom a ride in it check it out you can hear it his channel is called “Purobailando”
@@purosxs3157 thats badass. Im gonna watch it right now 🤟🤟
Hey frank ive this setup now for a few trips, Badass totally turns heads. But what is the proper setting for the bov? I notice if you twist the valve it has some adjustment as far as release. What do you recommend?
The tighter the adjustment the later it will blow off. The looser( less spring pressure) the earlier it will blow off. Do not loosen it to the point where u can see the o ring. Personally i just leave it almost full tight
Hey what’s up frank!? On that BOV should of put a zip tie so the sleeve won’t move up or down
Its pretty snug on there, has a bungee strap... But thats a good idea. Ill throw one on this weekend👍 thank you🍻
I just installed mine on a 21 x3 RR and I have double checked the tightness of all the clamps but I think I can hear the blow of valve constantly on while driving at moderate speeds with the accelerator on. When I gun it and let off it sounds like it’s working perfect. Should I hear it while just driving sometimes.
Yea , u kinda always hear a constant noise under 30% throttle
@@GLifeUTV ok. Just making sure. Thanks!
Do you find it difficult to see out of tinted half windshield?
Yup, he did...dont get it.. i have the oem tinted windscreen and its lower and alot better. Both of them scratch easily
Hey man I had a question what does that charge pipe do or does it make the bov louder?
Most aftermsrket charge tubes like the one you see here, have a port for the bov. That factory does not . Also they are higher quality can hold more boost with the more robust clamps
Yo what's the plug for that evo sends with there 2.0 kit ...I see youb didn't use it either but I just wondered what it's for
2.0 kit?
Do you need a tune or any kind of fuel tuner to have a blow off valve? Just wondering if it messes with the fuel and air ratio
No you do not
"Is your car quiet? does it not make enough noise?" said no x3 owner ever. 😂
I have charge tubes and a BOV on mine and love it, but he whining of the clutch still drives me nuts to this day. Lol
Yea, they are noisey but ive already got use to it. Im sure it sounds worse with a two seater
@@GLifeUTV ya I was wondering about that, if I had a 4 seater if it wouldn't be as bad.
Did U Adjust The Valve I Had Mine Installed I Can Hear It On Occasion Wen I Accelerate It In Neutral I Can’t Hear It
Ur machine will not build sufficient boost In neutral or park. U need to be driving the machine under load to hear bov correctly🤙
Damn now i wish i would of just gotten a can am instead of a rzr lol
🤔 i love me s good rzr too . My buddies turbo s also has a dope blow off valvw
@@GLifeUTV i am gonna have to install mine i just got the regular turbo rzr i like your channel your videos are bad ass thanks man keep it up...
Sounds dope. What speakers is he running as well? R those the fosgates?
Yea they are stage 5 plus some 8
did the same thing on my turbo s & that sound gets annoying in my opinion... sick whips tho
Does it? Do u have the same one or the one that point towards the front
Quick question how did you hook up your side mirror to power. i just bought the same mirrors for my 2019 can am 4 seater
Comes with a harness if i remember correctly. I think we did those to accessory 🤔
@@GLifeUTV yes it does did you hook up to the Accessory in the center or somewhere else
@@MasterDrhd yes in the center power distribution block to the right of the shifter
@@GLifeUTV ok thanks alot
What do you think about the rpm blow off valve 🤔
Havnt compared it to the evo yet. But from the two i have installed.. they are very loud.. sound really good. If u like to hear a loud blow off valve
i allready got the full 172 kit from can am all i want to add is a blow off valve kit how has this one held up?
Still works perfect
@@GLifeUTV Thx for your response man i still have about 5 months left on my warranty and since installing an aftermarket market part voids the warranty i wanna make sure i install something Reliable
@@MRALEX9870 On my opinion evo makes the best👍
How loud is it in the cabin?
Not annoying or to loud Sounds good
Missed shift in neutral... Best gimmick 😂
Poor cow 🐮 hahahaha
Haha
How much hp you have on your x3
This x3 is at about 205
Why not have it vent to atmosphere?
??? It is vent to atmosphere?
@@GLifeUTV didn't sound that loud?
It sounds good while im the car riding.. if u want louder ..the rpm bov is pretty loud
Did you get BOV direct From EVO
We got it from corona motorworx
Freaking $400 is anything cheap on these dang toys. Great video tho
@@brandonhenderson3518 hellno. These things are money pits😅
Glamis veterans
I wish i made it