Dat evaporust spul is prachtig: geen geuren, niet giftig en oneindig her te gebruiken! Doe wel een deksel erop terwijl hij staat, dan verdampt het iets minder gauw
Great, things goes forward :) Do not forget to restore the ring turret protective gasket as soon as possible, that would be too bad to put dust inside the bearing while it is now cleaned and filled with new grease. Hold on guys !
Emile didn't address that in the summary, but he stated in Dutch that the 'fabric slip' (google translate of 'stoflip' , so excuse me if wrong) should be put on as soon as possible, just for that.
Als je de cementmolen molen met zn as waar de trommel om draait zo horizontaal mogelijk zet, gooit ie het het beste rond en zal het sneller gaan. Nu staat ie een beetje omhoog van voren en blijft er veel achterin "stil" liggen. Verder prima idee 👍
Een cementmolen heeft twee standen. Ééntje voor het vullen, ligt het materiaal inderdaad achterin, en een mengstand. Dan staat de trommel meer horizontaal. De trommel had in de andere stand moeten staan. Er zitten drie uitsparingen in het kantelwiel 😁
Ja hangt er ook een beetje vanaf wat voor molen je hebt. Ik heb ook wel met 1 gewerkt die het draaien blokkeert met een soort remtrommel die tegen de schijf aan wordt gedrukt met een veer. Dan kun je hem in elke stand zetten die je maar wil
hallo ik ben Frans, ik kijk naar je video's, ik vind het ongelooflijk interessant, maar ik begrijp niets als je ondertitels in het Frans zou kunnen plaatsen, bedankt, zelfs als ik probeer af te leiden wat je zegt👌🏻👌🏻👌🏻
Hoi iedereen, door de "coronaverveling" was ik nog eens wat oude Mastermilo filmpjes aan het kijken. Tot mijn stomme verbazing zag ik, dat ik behoorlijk wat filmpjes was vergeten te liken. Dat heb ik dus alsnog gedaan. Als iedereen dat nu eens doet, het bedrijf en de filmpjes kunnen er alleen maar beter van worden.😊
Hoe werkt dat precies? Ik heb een hekel aan lifters, dus ik druk steevast op het andere duimpje: niet meeliften. Wat is het belang van dat liftpictogram aan te klikken?
He explained that he did not want to use the cabin for these small parts, because he didn't want to start the old compressor(that big one outside), and they are still waiting for parts for his compressed air system inside. The ( slightly ) bigger parts he will put in the blasting cabin. :D
Da's Master Milo stijl! ;-), daar hou ik van! Wellicht een voorbeeld waardoor deze vlog zo genoegelijk is om te kijken. (tenminste voor mij), Alhoewel Emile de 3 top-comments behandelt in de vlog, worden andere comments gelezen en op prijs gesteld (als voorbeeld de actie van Emile met betrekking tot de tie-wrap terwijl hij de engelse samenvatting deed). Hey, Master Milo style! :-), I like that! might be an example which make this vlog so pleasant to watch. (at least for me). Although Emile addresses the top 3 comments in the vlog, other comments are really read and evaluated and appreciated (as an example, the action of Emile regarding this plastic band when doing the summary in english).
Excellent work gentlemen! Too funny with the eye gouging zip tie! Haha, I also thought of the same thing when Milo applied it to the metal head banger. On with the show!💯🥇👌
the red paint is red oxide a great rust inhibitor but i think a rust converter works better befor any paint is applied . work safe guys things are heavy , rather replace the spring plates with new ones , as heated spring steel can be brittle if not heat treated properly , i think the white paint on the inside is a great idea , keep going guys i am enjoying the build
Keep up the great work! Can not wait to see it back on top of the chassis when completed! You have done so much so fast compared to these bigger collectors where it takes them five to seven years to complete! Touchette!! Peace out brothers!
Citric acid is good for taking rust off. Apparently it is the base for most anti-rust treatments, although I don't know if that is true. You can buy the powder is sachets, it is relatively cheap. I put a set of old post office scale that had been sitting years. It spent two days in the solution, it worked fine. Emile, I meant to thank you for that explanation in English. It is much appreciated, even if it is a few minutes. Have a great weekend.
You very smart guys are doing a great job so far . So when are you going to make some long tines for the fork lift to make things easier .the would be a great asset. We cannot wait to see tank finished . Cheers from
The best thing to use after cement mixer is phosphoric acid, it will get the microscopic rust pits and inner corners. I am impressed that Derek did not grease Emiles arm pits when he was holding the slew ring. I would have been unable to be good :D
thanks for the videos! the english sumary is great as my dutch isnt up to the task of translateing spoken dutch into english and i do wonder from time to time exactly what you are doing or thinking or working on at the time and the summary helps to answer many of those questions. a quick synopsis as you go would be more useful in my opinion but anything is better than nothing lol. im suprised there letting you have the barrel at all but im also suprised at the difference between justice and legal and i doubt you have 7 or 8 figures to spread around to make these troubles dissapear. good luck with the rest of the project
38:15 "Kijken langs welke kant ie erdoor geschoven zat want de torsieveren zullen het niet lekker vinden als ze andersom gebogen worden." Maar opmerkelijk genoeg maakt dat dus geen drol uit: 'linksom' torderen blijft 'linksom' als je de platen omkeert. Een beetje zoals rechtse schroefdraad ook rechts blijft als je een draadeind achterstevoren ergens indraait. Je zou 't moeten spiegelen i.p.v. omdraaien om de torsierichting om te keren, maar dat gaat nu eenmaal niet. (Inglisj summary: it doesn't make a turd difference for the torsion direction if you mount the springs backwards.)
Ik wil hun reactie met opvolgende discussie met uiteindelijke whiteboard uitleg zien. Cool weetje, doet mij denken aan licht polarisatie in suiker kristallen. Steve mold heeft daar een video over.
Nog 1 tip-voor-tom en dan ben je wat mij betreft geslaagd kerel: probeer de scènes te knippen als een zin afgelopen is. Ok, ik snap dat dat lastig is met het onophoudelijke geratel van Milo (geintje natuurlijk) maar als dat lukt krijg je van mij een dikke 10! #goedbezigkerel
@@leonkrouwel1878 zekers, laatst heeft tie zelfs nog een likkie verf gekregen. Maar ik zat idd ook ff te boenen voordat ik doorhad dat het aan hun kant was
gebruik het afsnijsel van je draaibank je zult zien dat werk wij deden daar ook kettingen in die kwamen daar super mooi uit. hoor het wel. Groet Ruud..
Great thinning out the trees. Clear the ground of stumps and brush and you'll have a little extra width to turn a tank around. I love Evaporust. I restore old hand tools and use it all the time. Very safe and works very well.(Thanks Hand Tool Rescue!) Clever with the mixer. I want to try that myself. Like a big rock polisher. I'll join the rest and ask "Where/what's up with the cannon?" It reminds me of school when the teacher would say spelling test. Number your paper from 1 to 10. Someone would raise their hand and ask How many numbers?
28:37 De cameraman kan zich eigenlijk beter een koptelefoon opzetten die op de camera aangesloten is (als dat kan) zodat hij kan horen hoeveel omgevingslawaai er is en of Milo en Dirk daardoor nog te verstaan zijn.
Haal anders dat rooster uit de spoelbak als die erin zit, gooi je die bak leeg daarop hoef je ook ni alles deruit te pakke en valt die troep op de grond die je niet in de trommel wilt
Maybe you have covered this in Dutch but the optics for the gun...do you have them and where do they go...in the turret or in the tank chassis? I can't imagine any of the complex systems, like the infra-red targeting system and the ballistic computer etc stayed with the tank when on display. If they did, I'm sure someone would have stolen them out of the tank when it was on public display outdoors. The optics alone would be a great prize.
He has the laser ranging device, the main gun sight and the infra-red lamp for the outside. I'm not sure if they still have the control gear for it or not though. It all came inside the turret.
Everything is still very much inside :D These are old vehicles (the BMP-1 based recovery vehicle, and this Chinese copy of the T-55) and their electronics are not really that complex. Ofcourse they have a collector's value so I cannot say if they might sell for a high price.
Ik zal het leuk vinden als jullie de heftrut ook een fatsoenlijke restauratie zullen geven....ergens is het toch een beetje een item wat in de werkplaats hoort en waar toen ook de kijkers mee hebben gestemd, dat die nu zo uit ziet, hoe die eruit ziet.... ....ik zal het zonde vinden als die er niet meer zal zijn..... ....en als de andere kijkers dat ook vinden, dan geef aub een duimpje omhoog..... Please give a thumb up if you like it if the pink forklift truck have to stay at the workshop.....
die heftrut hoort bij jullie. zij heeft een (roze) geschiedenis. Waarom ga je die motor niet repareren. (als je dat kan met een 12 cilinder moet het met een 4 cilindertje ook wel lukken) Brengt een mooie video met zich mee en kan zij nog een mooie tijd bij jullie blijven. Groet Alex van der Velde
Hoi Milo, Vaporust wordt altijd gebruikt door Hand Tool Rescue, je moet de onderdelen voor het beste resultaat 24 uur laten staan. kijk maar eens naar het resultaat op zijn youtube kanaal Hand Tool Rescue. Succes ;) Mensen like dit ff zodat Milo het ziet en er ook iets van kan opsteken voor andere projecten dank jullie wel.
Hoi Emiel en Dirk, Let op bij de motor van de cementmolen, De kap is van de waaier af waardoor de ventilator niets doet nu, Let dus op dat je motortje niet verbrand...
Hoe zit het eigenlijk met de verstuivers van de tank heb je die al laten testen. wand dat zal jullie gaan doen als je aan de koepel / toren ging werken
I had some aluminium parts painted at a car body shop for a military navy job and he applied the two-pack acid-etch and put them in the drying oven. The paint fell off, because the oxide eating acid does indeed need time to work. (Yes, it was a nightmare, all the NATO stickers went on and then peeled off with the paint)
to remove rust, desolve a cup of malases in about 20 Lts. of water. and soke you parts for about 24 hours.or untill clean, make your workshop smell like rum. Ha. try it.
@@mmm365 Ja ik weet het, alles smaakt lekker met Betuwe Jam. ruclips.net/video/jEBNEla-PPQ/видео.html Krijg nou de kammanwattes! ruclips.net/video/gC0meqCO6P8/видео.html
English Summary: 42:30
Well wellding dirk 👍🏻
Dat evaporust spul is prachtig: geen geuren, niet giftig en oneindig her te gebruiken! Doe wel een deksel erop terwijl hij staat, dan verdampt het iets minder gauw
Lijkt wel op Koken met Milo, men neme een cementmixer, kilo'tje straalgrid, hoopje oud ijzer, uurtje draaien et voila, Bon Appetito
Vergeten kruiden toe te voegen... smaakt voor geen meter dus.
@@Smartzenegger Met WD40 maak je alles lekker...
Great, things goes forward :)
Do not forget to restore the ring turret protective gasket as soon as possible, that would be too bad to put dust inside the bearing while it is now cleaned and filled with new grease.
Hold on guys !
Emile didn't address that in the summary, but he stated in Dutch that the 'fabric slip' (google translate of 'stoflip' , so excuse me if wrong) should be put on as soon as possible, just for that.
@@leonkrouwel1878 So everything is fine! Thank you for translating :)
Als je de cementmolen molen met zn as waar de trommel om draait zo horizontaal mogelijk zet, gooit ie het het beste rond en zal het sneller gaan. Nu staat ie een beetje omhoog van voren en blijft er veel achterin "stil" liggen. Verder prima idee 👍
'doppie' maken zodat ie haaks kan staan terwijl ie draait, en rechtop om materiaal/zand erin te doen ?
Een cementmolen heeft twee standen. Ééntje voor het vullen, ligt het materiaal inderdaad achterin, en een mengstand. Dan staat de trommel meer horizontaal.
De trommel had in de andere stand moeten staan. Er zitten drie uitsparingen in het kantelwiel 😁
Ja hangt er ook een beetje vanaf wat voor molen je hebt. Ik heb ook wel met 1 gewerkt die het draaien blokkeert met een soort remtrommel die tegen de schijf aan wordt gedrukt met een veer. Dan kun je hem in elke stand zetten die je maar wil
Great recap in english from 42:30 It's great being able to watch more of these vlogs and understand them. Cheers!
hallo ik ben Frans, ik kijk naar je video's, ik vind het ongelooflijk interessant, maar ik begrijp niets als je ondertitels in het Frans zou kunnen plaatsen, bedankt, zelfs als ik probeer af te leiden wat je zegt👌🏻👌🏻👌🏻
Il y a des courses de Néerlandais. Les gars déjà offrent leur matériel en deux langues. Desolé...
Hoi iedereen, door de "coronaverveling" was ik nog eens wat oude Mastermilo filmpjes aan het kijken. Tot mijn stomme verbazing zag ik, dat ik behoorlijk wat filmpjes was vergeten te liken. Dat heb ik dus alsnog gedaan. Als iedereen dat nu eens doet, het bedrijf en de filmpjes kunnen er alleen maar beter van worden.😊
Hoe werkt dat precies? Ik heb een hekel aan lifters, dus ik druk steevast op het andere duimpje: niet meeliften. Wat is het belang van dat liftpictogram aan te klikken?
@@kalkman. Hoe meer likes, hoe meer geld de adverteerders investeren in reclame.
... Has a modern sand-blasting cabinet... Mastermilo: Let's use a 70 Year old cement mixer!
He explained that he did not want to use the cabin for these small parts, because he didn't want to start the old compressor(that big one outside), and they are still waiting for parts for his compressed air system inside. The ( slightly ) bigger parts he will put in the blasting cabin. :D
Da's Master Milo stijl! ;-), daar hou ik van! Wellicht een voorbeeld waardoor deze vlog zo genoegelijk is om te kijken. (tenminste voor mij),
Alhoewel Emile de 3 top-comments behandelt in de vlog, worden andere comments gelezen en op prijs gesteld (als voorbeeld de actie van Emile met betrekking tot de tie-wrap terwijl hij de engelse samenvatting deed).
Hey, Master Milo style! :-), I like that! might be an example which make this vlog so pleasant to watch. (at least for me).
Although Emile addresses the top 3 comments in the vlog, other comments are really read and evaluated and appreciated (as an example, the action of Emile regarding this plastic band when doing the summary in english).
@@leonkrouwel1878 I know, I have been watching forever and love it.
true XD
Excellent work gentlemen! Too funny with the eye gouging zip tie! Haha, I also thought of the same thing when Milo applied it to the metal head banger. On with the show!💯🥇👌
Wie heeft er met z'n vette klauwen aan de lens gezeten?
Dikkiedik die is moddervet
Je moet je bril ontvetten
David Hamilton Effect :)
13:14 in het midden onderaan is je lens vies/vettig. Op 13:55 kun je het heel goed zien. Je zult het zelf ook al wel gezien hebben.
waar gevet wordt, vallen spetters! ;-)
(was me ook opgevallen: je bent me voor , maar later was de lens weer gepoetst)
Goed bezig hoor Tom!
Een cementmixstraalmachine. Zet er een webcam op en mensen kunnen 24/7 Master Milo kijken!
Lekker vertigo.
Master Milo, thank you for these workshop vlogs. Wish you all the very best !! Thank you for the english summary
the red paint is red oxide a great rust inhibitor but i think a rust converter works better befor any paint is applied . work safe guys things are heavy , rather replace the spring plates with new ones , as heated spring steel can be brittle if not heat treated properly , i think the white paint on the inside is a great idea , keep going guys i am enjoying the build
Great work done by both of you...hats off to you
Keep up the great work! Can not wait to see it back on top of the chassis when completed! You have done so much so fast compared to these bigger collectors where it takes them five to seven years to complete! Touchette!! Peace out brothers!
Citric acid is good for taking rust off. Apparently it is the base for most anti-rust treatments, although I don't know if that is true. You can buy the powder is sachets, it is relatively cheap. I put a set of old post office scale that had been sitting years. It spent two days in the solution, it worked fine.
Emile, I meant to thank you for that explanation in English. It is much appreciated, even if it is a few minutes. Have a great weekend.
Lekker kogeltje voor kogeltje mee kijken, heerlijk ontspannend. 😊
You guys are so great! Thanks for the updates and hard work!
Hallo kerels Gaan jullie de brandstof pomp nog laten testen voor jullie de koepel er op gaan zetten? Mvg wilfred
Ik weet niet of de bronstigpomp nog prioriteit heeft.
You very smart guys are doing a great job so far . So when are you going to make some long tines for the fork lift to make things easier .the would be a great asset. We cannot wait to see tank finished . Cheers from
The best thing to use after cement mixer is phosphoric acid, it will get the microscopic rust pits and inner corners. I am impressed that Derek did not grease Emiles arm pits when he was holding the slew ring. I would have been unable to be good :D
thanks for the english recap!
Die diesel in de spoelbak is zó milkshake-achtig, je zou bijna denken dat hij een lekke koppakking heeft ;)
Als mijn diesel op is tijdens sporten krijg ik ook n lekke koppakking :-)
@@markpoepiloeri8511 Ik ken mensen die krijgen een lekke kutpakking.
thanks for the videos! the english sumary is great as my dutch isnt up to the task of translateing spoken dutch into english and i do wonder from time to time exactly what you are doing or thinking or working on at the time and the summary helps to answer many of those questions. a quick synopsis as you go would be more useful in my opinion but anything is better than nothing lol. im suprised there letting you have the barrel at all but im also suprised at the difference between justice and legal and i doubt you have 7 or 8 figures to spread around to make these troubles dissapear. good luck with the rest of the project
12:05 Grote vet ogen op de zondagse soep en het is pas donderdag 😋🥣😂🤣
38:15 "Kijken langs welke kant ie erdoor geschoven zat want de torsieveren zullen het niet lekker vinden als ze andersom gebogen worden." Maar opmerkelijk genoeg maakt dat dus geen drol uit: 'linksom' torderen blijft 'linksom' als je de platen omkeert. Een beetje zoals rechtse schroefdraad ook rechts blijft als je een draadeind achterstevoren ergens indraait. Je zou 't moeten spiegelen i.p.v. omdraaien om de torsierichting om te keren, maar dat gaat nu eenmaal niet.
(Inglisj summary: it doesn't make a turd difference for the torsion direction if you mount the springs backwards.)
Ik wil hun reactie met opvolgende discussie met uiteindelijke whiteboard uitleg zien. Cool weetje, doet mij denken aan licht polarisatie in suiker kristallen. Steve mold heeft daar een video over.
Nog 1 tip-voor-tom en dan ben je wat mij betreft geslaagd kerel: probeer de scènes te knippen als een zin afgelopen is. Ok, ik snap dat dat lastig is met het onophoudelijke geratel van Milo (geintje natuurlijk) maar als dat lukt krijg je van mij een dikke 10! #goedbezigkerel
Emile, trommelen kun je het beste doen met een vloeistof (water en een reinigingsvloeistof) en trommelsteentjes (chips).
Chips erbij? Die van *Lays?*
@@Smartzenegger haha , welke smaak vind je lekker?
@@r3d3k3r Alleen lekkere smaak vind ik lekker.
Zat ik Voor de 10e keer mijn bril te poetsen zag ik dat de vlek op jullie camera zat! 😂
op de lens ;-), die camera heeft waarschijnlijk meer gebruikssporen ;-)
@@leonkrouwel1878 zekers, laatst heeft tie zelfs nog een likkie verf gekregen.
Maar ik zat idd ook ff te boenen voordat ik doorhad dat het aan hun kant was
Ik denk dat iemand een scheet op de lens heeft achtergelaten.
@@mmm365 En natuurlijk vochtige damp uit de schaamstreek.
Great channel! keep the vids coming
You guys really need a media blaster in the workshop. 😁
gebruik het afsnijsel van je draaibank je zult zien dat werk wij deden daar ook kettingen in die kwamen daar super mooi uit. hoor het wel. Groet Ruud..
Je hebt een mooie aanhanger
Een naaldhamer op lucht zou ook erg handig zijn bij het ontroesten , ook bij een dikke laag verf werkt het prima om die laag te verwijderen .
Great thinning out the trees. Clear the ground of stumps and brush and you'll have a little extra width to turn a tank around. I love Evaporust. I restore old hand tools and use it all the time. Very safe and works very well.(Thanks Hand Tool Rescue!) Clever with the mixer. I want to try that myself. Like a big rock polisher.
I'll join the rest and ask "Where/what's up with the cannon?" It reminds me of school when the teacher would say spelling test. Number your paper from 1 to 10. Someone would raise their hand and ask How many numbers?
Very nice will it be a party when the tank and turret are reunited?
Milo it will be wise to fit the turret slu ring to the hull and the fit the turret to the hull of the tank
Hi from 🇸🇪👍🏻
Emile - thank you for english!!!!!!!
Toppers. Goed bezig!!
28:37 De cameraman kan zich eigenlijk beter een koptelefoon opzetten die op de camera aangesloten is (als dat kan) zodat hij kan horen hoeveel omgevingslawaai er is en of Milo en Dirk daardoor nog te verstaan zijn.
En toch een RODE wireless GO gebruiken...
Het beste is gewoon beide een mic geven
goede fabricage. bedankt jongens
Gaan ze mooi mee met de tijd van het jaar alles in ROOD BLAUW dezer dagen.
Top werk👍👍👍👍
Je had er een zak graniet breuksteen ( wat je op je oprit gooit) in de betonmolen kunnen gooien.
Haal anders dat rooster uit de spoelbak als die erin zit, gooi je die bak leeg daarop hoef je ook ni alles deruit te pakke en valt die troep op de grond die je niet in de trommel wilt
another great product for rust removal is MC51 not sure how much its costs where you are
What is being done to deactivate the cannon for the tank?
Evapo-Rust is tops jongens. In de VS gebruik it het altijd, maar je moet die onderdeelen zeker 24 uur laten staan.
Hahahaa lekker bezig met de Knetterbiel🤣🤣🤣
zo! lopende bandwerk met die kogeltjes erin doen! of is het draaiende tandenkranswerk?
evapo rust een echt wondermiddel
Net zo wonderbaarlijk als wonderslijm?
Emile zijn Engels is pure komedie haha!
@@mmm365 hahaha
Are they going to tack weld the Dust Cover onto the Turret Bearing? Don't want to forget that before you install it.
@@mmm365 That is good. I have had those moments when putting stuff back together where I go "Uh Oh what is this bolt doing here"
10:30 Is dat nog de Thinner waar de Corsa op gereden heeft? :P
Maybe you have covered this in Dutch but the optics for the gun...do you have them and where do they go...in the turret or in the tank chassis? I can't imagine any of the complex systems, like the infra-red targeting system and the ballistic computer etc stayed with the tank when on display. If they did, I'm sure someone would have stolen them out of the tank when it was on public display outdoors. The optics alone would be a great prize.
He has the laser ranging device, the main gun sight and the infra-red lamp for the outside. I'm not sure if they still have the control gear for it or not though. It all came inside the turret.
Everything is still very much inside :D These are old vehicles (the BMP-1 based recovery vehicle, and this Chinese copy of the T-55) and their electronics are not really that complex. Ofcourse they have a collector's value so I cannot say if they might sell for a high price.
Ik zal het leuk vinden als jullie de heftrut ook een fatsoenlijke restauratie zullen geven....ergens is het toch een beetje een item wat in de werkplaats hoort en waar toen ook de kijkers mee hebben gestemd, dat die nu zo uit ziet, hoe die eruit ziet....
....ik zal het zonde vinden als die er niet meer zal zijn.....
....en als de andere kijkers dat ook vinden, dan geef aub een duimpje omhoog.....
Please give a thumb up if you like it if the pink forklift truck have to stay at the workshop.....
Hi team ,sorry to hear you have ball problems again ,sure there must be a cream out there you could use to make those bad boys smooth again .toppers
Vaporust is Hand Tool Rescue! ☝️💪✌
die heftrut hoort bij jullie. zij heeft een (roze) geschiedenis. Waarom ga je die motor niet repareren. (als je dat kan met een 12 cilinder moet het met een 4 cilindertje ook wel lukken) Brengt een mooie video met zich mee en kan zij nog een mooie tijd bij jullie blijven. Groet Alex van der Velde
Hoi Milo, Vaporust wordt altijd gebruikt door Hand Tool Rescue, je moet de onderdelen voor het beste resultaat 24 uur laten staan. kijk maar eens naar het resultaat op zijn youtube kanaal Hand Tool Rescue. Succes ;) Mensen like dit ff zodat Milo het ziet en er ook iets van kan opsteken voor andere projecten dank jullie wel.
Do they use Varsol or Diesel in their Cleaning/Degreaser Table?
@@mmm365 I would like to see a car drive on that crap. :)
Wat is dat voor fancy vet, dat blauwe?! Zou het al bijna kopen vanwege de mooie kleur :')
@@mmm365 Ook lekker voor in bed. Waterbed weliswaar.
Smurfensnot 😀
gerijpte zyklon b
@@mmm365 Om de edele delen mee in te smeren he? Niet 't putje van het bad.
After this and the BMP recovery vehicle, maybe you guys could restore a soviet T-62M used in Afghanistan 😄
Hoi Emiel en Dirk, Let op bij de motor van de cementmolen, De kap is van de waaier af waardoor de ventilator niets doet nu, Let dus op dat je motortje niet verbrand...
Hoe zit het eigenlijk met de verstuivers van de tank heb je die al laten testen. wand dat zal jullie gaan doen als je aan de koepel / toren ging werken
Nee die is nog niet getest
Scotchbrite helpt goed tegen roest hoor
Ja maar Emiel , dat hebben we op het Sas toch ook al eens met een wasmachine gezien ???
I think it's time to change out the solution in your parts washer..
why don't you use the sandblaster you have a compressor to use it you can clean those plates well and as always good work dirk
Is het niet mogelijk om met solidworks een 3d model te maken en dit als een .stl bestand te delen?
The journal bearing balls must be well protected from dust and dirt. Now we see a huge gap - a path for dirt to enter the bearing.
They are not don with it
yes milo said the dust cover is going back on
volgende keer waspoeder en wat water dr in dan ken je zo je kleding wassen in die molen !
Mn wasmachine is kapot, thx voor de tip ik zal dadelijk even langs een bouwplaats
Zet de molen ook in het roze ✌🏼
Waarom gebruiken jullie geen naaldbikhamer om het roest van de materialen af te krijgen?
Het huidige compressortje heeft te weinig capaciteit.
Thank you for the English summary at the end now I can stop learning Dutch.
I had some aluminium parts painted at a car body shop for a military navy job and he applied the two-pack acid-etch and put them in the drying oven. The paint fell off, because the oxide eating acid does indeed need time to work. (Yes, it was a nightmare, all the NATO stickers went on and then peeled off with the paint)
Eerste en 50 minuten goed bezig
What happened to the English captions?
Zak swaeco stones kopen in de betonmixer gooien..
to remove rust, desolve a cup of malases in about 20 Lts. of water. and soke you parts for about 24 hours.or untill clean, make your workshop smell like rum. Ha. try it.
Topper
Vorige blog: die vlek zie je niet op beeld.
Deze vlog: nou zeker wel!
Rather than raise the ring up to the turret it would be easier to fit the turret ring to the tank first then lower the turret onto the ring
Probably not, because all of the gear for this ring is inside the turret: install that and then 'simply' bolt it to the tank chassis.
@@leonkrouwel1878 As it came out.
Hoef je de dakgoten ook niet meer schoon te maken in het najaar.
Het leven is pas volmaakt met een eigen betonmolen
Wat doe jij daar allemaal in, aan en mee?
Bij jou staat ie zeker in de slaapkamer?
@@mmm365 Ja ik weet het, alles smaakt lekker met Betuwe Jam. ruclips.net/video/jEBNEla-PPQ/видео.html
Krijg nou de kammanwattes! ruclips.net/video/gC0meqCO6P8/видео.html
Waarom is een luik een ‘’hatch’’ ? klopt de nederlandse taal niet meer?.
Topperrrrrrsssssss
sssssssrrrrrreppoT
Peter, in Cock magazine las ik dat er een kerstsingle van de Toppers uitkomt: 'laat die sterren maar stralen'. Verheugdend nieuws, nietwaar?
@@kalkman. Oh jee, diarree zeker?
Hoe is het met de graafmachine milo
Die staat nu in Graven.
@@Smartzenegger in onderhoud of
@@brobloks6106 of
@@Smartzenegger wat ik
@@brobloks6106 Nee, die graaf machine is in Graven begraven.
🌹🌹
Use Acid Phosphorique
Veel meer grit erin. Zeker tot de helft
Dat is zeker waar 😀
Causticsoda erbij en wat water
straal grid in die betonmolen heeft geen zin zou eerder aquarium grid pakken
Haay!
Ждал с нетерпением видео....
milo liet een scheet op 21:27
Hoe gaat het
Het? Het gaat wel, maar dan niet in beeld.
Andrew Camarata would love to get his hands on that tree feller at the start of this video.