Great video & explanation on Adams Products. Look forward to buying some professional after the videos I have seen and how great they work!! What kind of rims are those on the car?
Man huge difference with a foam cannon, both are great but and is way better then the old bucket full of water and soap dipping. That foam cannon is serious suds lol
What's the difference between the edgeless grey and the single plush? Just the lack of edges and lower GSM? they both look like they have the same fiber design to me.
Have a gas. I got an electric. The gas engine runs all the time. So loud and so annoying. The electric one only hums when you need it. I got a $99 Greenworks electric one from Lowe’s. 1700 psi. It won’t blow the paint off. I had a 3000 psi pressure washer take paint off.
Electric for consumer is great since they are quiet and work decent. Try to find some with a little higher GPM, usually the entry level products will be around 1.2-1.5 GPM. Not a huge deal but more GPM increases flow which will help get thicker foam. On that note, if you want a foam cannon get one with a 1.1mm orifice to increase foam density. Last thing you should invest in would be a 40 degree nozzle to decrease pressure and have a larger fan of water to sweep away dirt. Best of luck, - Tony.
Not a super fair comparison at 6:20 between shampoo and ultra foam. You used Shampoo in a regular hose cannon and ultra foam in a pressure washer cannon.
Dear Adam's: Please develop a huge car diaper to absorb all the chemicals while wurshing a car to save the environment. This would somehow magically be recycled.
Look up “water reclamation mats” on Google, these are used to washed cars in California for example where water is limited. It would catch chemicals as well
I like Adams products but every time I order them half of it is spilt in the box Adams please fix this issue have had this issue with other similar products
Oscar Montes We apologize for the issues. Please contact our customer service to resolve these issues at: orders@adamspolishes.com or call 866-965-0400. We thank you for your business and again apologize for these issues.
Great products, but the two bucket wash method with grit guards is so outdated. Just stick 5-6 microfiber mitts in one wash bucket and use one mitt per panel. Much safer and faster. :)
I think you’re missing the point of the grit guards, it’s to trap the dirt from clinging onto your mitt again, if you have 5-6 mitts in the bucket you now how 5-6 mitts covered in dirt lol
How much soap do you need to wash a car ? First you spay the car down with soap and then you put more soap on the wash mitt ,really, how dose that make sense to anyone with a brain that works. I guess it is a good way to sell more soap ? .
Avid Reader now if you’re a self working professional, I highly doubt you’re doing 15 cars in one day. If you have a shop with employees, you’d be wise to already have a washer and dryer. And as a shop, having a lot of mitts is already necessary. C’mon man, you’re trying to argue the what if, maybe argue the why not.
I had first used Adams products a few years ago,detailer spray,shampoo etc.just been great products!! Very satisfied with their products.
If I can buy every single Adam's product, tool, and towel, and show proof, will Adam come over to my house personally and detail my car?
@Cohen Thiago was it?
They sell the whole kit for $2k right now on their website, every single tool, towel, chemical
Please do a video for those of us who was our car at a car wash but want to clean and detail as best as we can.
They have a few of them, look thru the channel
Great video & explanation on Adams Products. Look forward to buying some professional after the videos I have seen and how great they work!! What kind of rims are those on the car?
7:20 THATS ALSO WHAT SHE SAID 🤣🤣🤣🤣 IM DYING OVER HERE
Lmaoooo!!! 😂😂
That was a beautiful job and a car and I can’t wait to get my Adams products
Is the classic car shampoo good to use with cars that are ceramic coated?
I would presume so. Allegedly it’s gentle enough to leave wax on, much less ceramic coat.
Man huge difference with a foam cannon, both are great but and is way better then the old bucket full of water and soap dipping. That foam cannon is serious suds lol
Excellent informative video as always 💎🇺🇸✊
6:40 THATS WHAT SHE SAID🤣🤣🤣
Thanks!
What's the difference between the edgeless grey and the single plush? Just the lack of edges and lower GSM? they both look like they have the same fiber design to me.
I feel like Adam needs to bring the soul patch back.
Washing a perfectly clean car. Genius
They’re just showing you proper wash techniques so calm down.
That regular foam gun is the exact one as the Griots Garage version. Just an Adams sticker instead of a GG
Most of these tools are the same across the board...
Great work guys !
That’s so premium.
I feel like this guy has a Velcro patch below his bottom lip for a possible upcoming Premium Adams’s Polishes microfiber detail finger glove. 🤣
What brand power washer were you using?
Would you recommend a gas or electric pressure washer and what PSI
Have a gas. I got an electric. The gas engine runs all the time. So loud and so annoying. The electric one only hums when you need it. I got a $99 Greenworks electric one from Lowe’s. 1700 psi. It won’t blow the paint off. I had a 3000 psi pressure washer take paint off.
Electric for consumer is great since they are quiet and work decent. Try to find some with a little higher GPM, usually the entry level products will be around 1.2-1.5 GPM. Not a huge deal but more GPM increases flow which will help get thicker foam. On that note, if you want a foam cannon get one with a 1.1mm orifice to increase foam density. Last thing you should invest in would be a 40 degree nozzle to decrease pressure and have a larger fan of water to sweep away dirt.
Best of luck,
- Tony.
Whats garden gloss? :)
H2O Guard and Gloss, a nice drying aide and sealant.
What state was this video taken in?
Caleb Cross Florida
Not a super fair comparison at 6:20 between shampoo and ultra foam. You used Shampoo in a regular hose cannon and ultra foam in a pressure washer cannon.
How the hell did I get an ad for Meguiars on this!? Lol
RUclips logarithms
Dear Adam's: Please develop a huge car diaper to absorb all the chemicals while wurshing a car to save the environment. This would somehow magically be recycled.
This is big brain detailing for the modern age. Like a giant diaper you can drive on top of that soaks up all of the chemicals and water.
Look up “water reclamation mats” on Google, these are used to washed cars in California for example where water is limited. It would catch chemicals as well
I like Adams products but every time I order them half of it is spilt in the box Adams please fix this issue have had this issue with other similar products
Oscar Montes We apologize for the issues. Please contact our customer service to resolve these issues at: orders@adamspolishes.com or call 866-965-0400. We thank you for your business and again apologize for these issues.
06:40 “That’s what she said” 🤪
Great products, but the two bucket wash method with grit guards is so outdated. Just stick 5-6 microfiber mitts in one wash bucket and use one mitt per panel. Much safer and faster. :)
I think you’re missing the point of the grit guards, it’s to trap the dirt from clinging onto your mitt again, if you have 5-6 mitts in the bucket you now how 5-6 mitts covered in dirt lol
And who the hell is going to use 5-6 mitts on a car lol
@@user-in8xx1xu5b Don’t see what’s so hard about it. If anything, it’s waaay faster than the two bucket wash method. Don’t knock it til you try it
Hell I've been doing it wrong this whole time... I used the air cannon to dry my whole truck lol..
A better life through chemicals.
That background music loop makes me want to bang my head on the concrete. Please leave out the music.
How much soap do you need to wash a car ? First you spay the car down with soap and then you put more soap on the wash mitt ,really, how dose that make sense to anyone with a brain that works.
I guess it is a good way to sell more soap ? .
It’s better to have 4-8 wash mitts depending on the size of your vehicle. This way you don’t have to worry about dirt traps.
Mr ALF like the Gary Dean method
Ronaxx3 haha, that’s right. Mr. Detail Juice himself.
Avid Reader this is very true. But then again, if this is your preferred method, as a professional you’d have a system setup to support this method.
Avid Reader you’d have a washer and a dryer...😉👍🏽. See what I did there.
Avid Reader now if you’re a self working professional, I highly doubt you’re doing 15 cars in one day. If you have a shop with employees, you’d be wise to already have a washer and dryer. And as a shop, having a lot of mitts is already necessary. C’mon man, you’re trying to argue the what if, maybe argue the why not.
Omfg I've drying my car wrong the whole time ... 🤦♂️
If you ceramic coat your car you can eliminate the need for all of this work and wasted soap all over the ground. 😁
Tug Bankert how’s that?
Lmao, that car is NOT “that dirty”.
6:41... HA Gaaaaay