I'd love to have all 3 variants! But as a poor I'll probably have to settle for getting a 6x3 variant with the other 2 barrels made by you and wait for hardware kits and STLs.
I've been following your progress on these and im so excited to finally see it complete! How could anyone just pick one? I need all three in my life! Amazing work and I can't wait to see what else you do.
The barrels can be changed, but it's not a quick swap at all. It's 4 screws. I've already sold a single blaster with all 3 barrels included. Send a message over to my Etsy, and we can figure something out!
Perhaps in the future, but I am focusing on selling completed blasters for now. I'd prefer to figure out a better source for hardware so I can get some bulk discounts, and make hardware kits cheaper to buy individually.
@@radioactivesdesigns3554 oh yeah, in the future for sure. I'm just so happy you're keeping old school inline clips going. I think with a high displacement short stroke piston, all kinds of shotgun designs are possible.
This looks so awesome! I have all of the 3d printed parts from the YEHW. Do i need to reprint all of the parts from your remix, or are there only specific files that need to be reprinted? TIA for any info/advise that you can provide.
I believe the only part that is still compatible with the YEHW is the trigger and the hammer. That being said, files and hardware are currently not available. I'm focusing on delivering fully completed and assembled blasters before I take a stab at attempting to sell hardware kits. I'm hoping the more hardware I can buy at once, the lower each individual kit would cost, so I can keep the hardware price as low as possible, and reduce the cost of the completed blaster as well.
For now, just the listing for a fully completed blaster. I want to focus on this, and rebuild some of my savings so I can buy enough hardware to get some bulk pricing savings that I can then pass on to buyers.
Someone didn't watch the entire video! I explain the blasters lineage, going from the YEHW, to the Samson, to the Samson XL, to my variant of the blaster, the Radson XL! I also talk about my royalties, licensing, and agreements I have with other designers concerning the sale of my blaster
Ah, old school inline clips. That's a throwback. Any chance that you'll make adapters to allow the MXL version to fire other ammo types without disassembly?
@Helpnothing I haven't heard of any of them breaking in users hands. I'm sure if you dry fired it or dropped it on concrete enough times, something would break, but it's super robust and durable to normal operation.
Not planned yet. Focusing on selling completed blasters so I can reinvest the money from those sales into getting bulk hardware, so hardware kits AND completed blasters can be cheaper.
It may have delayed completion by a day at most, but all products have a 1-2 week completion time, as stated on all listings. Several orders are scheduled to be completed today.
Howdy! Me and my friend really like your work! My friend was wondering if he could propose to you about making two guns from the computer indie horror game - Showdown Bandit! If you have discord, we could probably discuss it there, of course if you have time and want to!
![Gunna - HIM ALL ALONG [Official Visualizer]](http://i.ytimg.com/vi/HiCxoDeo0hc/mqdefault.jpg)
Yes please! More hand cannons from Radioactive!!!!!
Very nice! Gotta love that performance with Mega XL!
Got one on the wish list!
These look super high quality, well done
And these are among the first blasters I put together. Quality will only go up from here!
I'd love to have all 3 variants!
But as a poor I'll probably have to settle for getting a 6x3 variant with the other 2 barrels made by you and wait for hardware kits and STLs.
Def getting one soon amazing job
This is pretty cool, the shotgun ones especially
I've been following your progress on these and im so excited to finally see it complete! How could anyone just pick one? I need all three in my life! Amazing work and I can't wait to see what else you do.
Well don't wait! They're going quite quickly!
Amazing!
Awesome builds!, glad that they finally got completed!(Would love some STL’s tho)
Ooh looks awesome! Don't think I'd get one though cause a stock nerf rival knockout is already wayyy too loud for my indoor use :(
Looks good.
Really love these! I need them all! Are the barrels swappable and can you order 1 variant with the other 2 barrels as well?
The barrels can be changed, but it's not a quick swap at all. It's 4 screws. I've already sold a single blaster with all 3 barrels included. Send a message over to my Etsy, and we can figure something out!
@@radioactivesdesigns3554Ok got it! That's what I wanted to know is if i could buy 1 blaster with all the barrels. I will contact you! Thanks!
seeing you pull out that mxl made me realize you have HUGE hands :O
One of my customers were surprised at how big the blasters actually were, because they didn't look that big in my hands.
Any plans to sell STLs and hardware kits? I love the potential of these large diameter, short stroke, pistons for future builds.
Perhaps in the future, but I am focusing on selling completed blasters for now. I'd prefer to figure out a better source for hardware so I can get some bulk discounts, and make hardware kits cheaper to buy individually.
@@radioactivesdesigns3554 oh yeah, in the future for sure. I'm just so happy you're keeping old school inline clips going. I think with a high displacement short stroke piston, all kinds of shotgun designs are possible.
This looks so awesome! I have all of the 3d printed parts from the YEHW. Do i need to reprint all of the parts from your remix, or are there only specific files that need to be reprinted? TIA for any info/advise that you can provide.
I believe the only part that is still compatible with the YEHW is the trigger and the hammer.
That being said, files and hardware are currently not available. I'm focusing on delivering fully completed and assembled blasters before I take a stab at attempting to sell hardware kits. I'm hoping the more hardware I can buy at once, the lower each individual kit would cost, so I can keep the hardware price as low as possible, and reduce the cost of the completed blaster as well.
I LOVE IT
I love this blaster but have you thought about a somewhat rectangular plunger?
That would be so much more difficult to do. Might look interesting though..
@@radioactivesdesigns3554 all for that aesthetics
are files and harware BOMs going to go up too? or is it just the etsy listing for the physical product
For now, just the listing for a fully completed blaster. I want to focus on this, and rebuild some of my savings so I can buy enough hardware to get some bulk pricing savings that I can then pass on to buyers.
Shouldn’t you also put that the base blaster is a yehw from CS (his shop’s back open)
Someone didn't watch the entire video! I explain the blasters lineage, going from the YEHW, to the Samson, to the Samson XL, to my variant of the blaster, the Radson XL! I also talk about my royalties, licensing, and agreements I have with other designers concerning the sale of my blaster
Ah, old school inline clips. That's a throwback.
Any chance that you'll make adapters to allow the MXL version to fire other ammo types without disassembly?
I suppose it's possible I could make a single mega, or 3/4 shot half dart. That might wait for the 2nd or 3rd wave of barrel types.
@@radioactivesdesigns3554 that would be awesome. Chhers!
8:48 you can basically make a pre buff Mozambique from Apex legends
#savetf2
I was wondering about the durability of these blasters. How strong is it?
@Helpnothing I haven't heard of any of them breaking in users hands. I'm sure if you dry fired it or dropped it on concrete enough times, something would break, but it's super robust and durable to normal operation.
amazing! hardware kit when??
Not planned yet. Focusing on selling completed blasters so I can reinvest the money from those sales into getting bulk hardware, so hardware kits AND completed blasters can be cheaper.
@@radioactivesdesigns3554 smart idea! I'll be eagerly waiting lol
Is this why the one thing I ordered from you on the 10th, still hasn't shipped out yet?
It may have delayed completion by a day at most, but all products have a 1-2 week completion time, as stated on all listings. Several orders are scheduled to be completed today.
@@radioactivesdesigns3554I wasn't trying to be hostile, I apologize. Was just curious about my order. Appreciate your business and what you do.
I wasn't trying to come off as pushy. I apologize. I appreciate what you do man. Thank you for the update.
I am the exact 1000th view!
thats the nerf fortnite hand cannon
Not quite!
Not everything is based of Fortnite!
Howdy! Me and my friend really like your work! My friend was wondering if he could propose to you about making two guns from the computer indie horror game - Showdown Bandit! If you have discord, we could probably discuss it there, of course if you have time and want to!