Это видео недоступно.
Сожалеем об этом.
WOODWORKER MUST HAVE THIS - TABLE SAW FENCE WITH FINE TUNING & INCREMENTAL POSITIONING
HTML-код
- Опубликовано: 15 авг 2024
- #microadjusterfence #incrementalpositioning #tablesawfence
Hi guy I just want to say HAPPY NEW YEAR 2022 and WISH YOU ALL THE BEST.
Today project we still continue with our table saw project on this part 4 of the build, and this time we build table saw fence.
But this table saw fence not just ordinary fence this fence have fine tuning and incremental positioning also have complete feature to make this table saw line up perfectly with the blade and square with the table top.
And that's why this fence is the perfect fence for the precision cutting measurement.
cool right..!
This build we got inspired by Jer schmidt design for the fine tuning system also hammer k3 winner that can slide in and out also Grizzly industrial table saw fence base slide
oke than enjoy the video.
Jer schmidt YT : / jerswoodshop
Helmi varo YT : / @helmi_varotex
TABLE SAW PART 1 : • TABLE SAW LIFTING MECH...
TABLE SAW PART 2 : • AMAZING WOODWORKER TOO...
TABLE SAW PART 3 : • TABLE SAW TRUNION & ca...
Instagram Jhon arief
@jhonariefdiy
FB page jhon Arief
/ workshopjhonarief
Support me on PayPal : paypal.me/jhonarief
This is what we neeed in the world. People doing what people can do, not big corporations., you guys are amazing. May God bless the work of your hands
Use 2 half nuts with a spring and another cam locking the micro adjuster to eliminate backlash.
Memotong kayu dengan presisi milimeter adalah kepuasan hakiki para woodworker.
terimakasih masbro penjelasanya mudah dimengerti orang pemula seperti saya
Super idée et belle réalisation. Félicitations !
Wow! You are so many levels above where I think I could ever get! Still, inspirational and some day if I get the time and will power, I will use your videos for inspiration. Thank you! Your work is awesome!
I just wish some of the manufacturers watched these videos and got ideas they could incorporate into new saws. The fences on the cheaper saws are usually crap and let the whole saw down.
I've binge-watched several tablesaw fence videos--this is the best design. This basic design with lots of tweaks and variations--EXCELLENT. I'm already thinking through where I can get me some surplus acme thread shaft...
That half circle jig is genius!
I made a similar one before. Use stainless threaded rod and nuts, galvanized wear out and don't lock correctly after a while.
An amazing and neat build! Thank you for sharing.
Great work little over kill but not bad true is that the fence is very inportante for safety to be accurate and firm otherwise you will have kick backs and flying wood peaces to your face so great job .
Jeremy Schmidt made this design ages ago and needs to be recognized as the creator of this idea.
He does
Absolutly
He said that in the opening of the video already.
Duly noted.
Классная идея 👍 особенно микронастройка👏👏👏 Успехов Вам 🤗
Amazing Quality Control.
Good job, good fance system, I like your video.
Maturnuhun gih. 😍
This is really great and beautifully done!
Welldone
Makasih mas did
That is amazing..
Terimakasih atas kolaborasinya❤️❤️
Sama2 mas
Ikut om.... ☝
@@PlywoodCraft hayuuuks
Canggih keren mantap kolaborasinya
Amazing Engineering and build!!! A must have !!!
Thank you sir
2:35 LOL... I am a child...
Great video.
Mantap om
very good job cheers
Mantappp guyss
Hey my name is Jeremy smith. For real. You wanna send me the plans. I have a hitachi c10fl. No fence. That I'm restoring. And I really like this fence
Muy Buen Video.
*¡¡¡ BUEN TRABAJO !!!*
Спасибо за идею механизма точной настройки пилы.
Работать сварочным аппаратом без защитной маски опасно, береги свое здоровье товарищ.
Thank you
Good job 💪🏻
Marvelous, indeed, mas Jhon ..
Well done !
Is nice design
Keren bang
great!
Excellent work 👍
Excellent work
It's amazing my boss
Makasih juga bosku sudah mampir🙏🙏
SHOW SHOW SHOW MARAVILHOSO
Keren om, mantabb
Great job and nicely documented. Thanks for the video. I really love woodworking and the tools/toys that go into it, but to top that off with just an adorable kitty! I
Salut à toi, très bon travail. Très bonne vidéo et je viens de m'abonner à ta chaîne 👋👋👋😉. Un plaisir à regarder à bientôt.
Fantastic!!
Hello Jhon. I love the fence build. I bought M16 meter long Rods. I actually bought 2 of them just incase I mess up one. LOL
I'm about to start building my own table saw. I will begin this month early...ish. I need to get some drawing down on paper 1st before beginning bcos I want to have something to fall back on if I need it. U get my meaning bro.
U made a great job of the fence. I saw that guys other video u spoke about.
Can I ask why u used a rod with 20mm incremants?? I thought he used 1/16th himself but I'm probably wrong. I have bought the nuts as well for M16.. I'm going to build the whole frome from Steel. I want to build the tilt mechanism into my saw as well. I have an old crappy table saw from TITAN. It's pure garbage but the motor/arbor is really decent. It's nearly 2HP so that's enough for me atm. I weill upgrade the motor to be a belt driven saw in the future but cost is a bigger thing atm and I want to recycle as much of the old saw as I can.
I'm also going to build in a sliding table but it will not be too heavy either. I watch a guy do his jsut there and he had so much weight built into it that he couldn't get rid of the play from it.
The great thing about RUclips is guys like u and Jer Schmidt and many more who make awesome videos that teach ppl like me how to do this dso thanks very much for this and explaining it so brilliantly.. Salute from Dublin, IRE.
Where did you order the aluminum extrusion. Can you add the exact link for it please.
Topíssimo meu amigo. Mas não entendi uma coisa, se sua escala é de Milímetros, a Barra roscada não deveria ser de passo 1mm ?
Can I ask about the truss Bearings please my friend?? Why are they so important for this fence? I watched the other guys videos too. As I saw I bought a 16mm x 1000mm Threaded Rod for my table saw fence build. I'm a little bit stumped about why those special bearing are needed though? Do they allow u to get the precision movement with the fence? I have everything else to build my fence but this is the part I don't understand. If u or anybody in the comments could explain the use of the Truss bearings I would be very grateful.. Thanks all..
Sayang sekali bahasa Inggris om 😭
Saya jadi gak paham 🙏
Mantapp om 🙏🙏🙏
👏👏👏
Awesome! I'm going to get started on this right away. As soon as I get a circuit installed that can handle a welder and a welder. And then learn how to weld. 😩
First class job. just got a bit confused with mm and cm so your bar is 40x40 mm by 1.6 mm thicknesds x 300 mm in length
Can show me in video timeline which part that you confuse sir?
@@jhonarief my bad it was the 30 cm i thought you said 300 cm :)
HI and thanks... could this also work with a 16m steel rod instead of 20m?
I think that will also work, sir
Hey Dude - Absolutely Awesome, Love it - Do you have Plans for it ?
Ya, Jeremy's fence design is amazing! I've wanted to build one ever since I saw his original video. Nice job on replicating this for your own.
Your video on the sliding table is fantastic! I will re-watch it and take notes. The custom built sliders are very impressive!
Your table saw is really coming together!
Thank you sir
Hola como estas como puedo bajar la guia del despiece de la sierra te escribe legaris carmona desde valledupar colombia te agradezco
Show
What kind of rod is it ? Threading ?
@@fabog3732 yes, 20mm industrial long threaded rod
How much money you think you have invested into this build so far? Im in the market for a new table saw and watching ylu build this one im almost certain that your gettin way more bang for your buck per say
Please share asscer
😅 great job very good detail,,, BUT,,, way too much background noise it is so distracting
mas, bisa pesen fence system nya itu aja gk?
Another question : how did you cut the nut in half properly?
I recomended you Use hacksaw to make that cut perfectly in half
@@jhonarief thanks!
1:31 what kind of metal are the two strip plates ? also iron?
That just regular strip plate iron with 3 or 2mm thick will do fine,because it only going to be adjuster spacer for the fence
@@jhonarief Thanks a lot!
kalau mahu tempah utk table saw makita mlt 100 bisa mas?saya di malaysia
Maaf bang untuk sàat ini saya tidak bisa produksi untuk pemesanan 🙏
Abg dari malaysia ka... Boleh saya nk tempah untuk fence table saw
Saya dari Indo bang
Boleh buatkan tak abg... Boleh kot postkan daripada sana... Melalui shopee pon bagus.. mudah
Tread bearing nya beli dimana Bang Jhon?
Thrust bearing maksudnya ya
@@jhonarief
Itu Bang, yg fungsinya untuk memutar micro Adjuster Fence...
@@DIYtool_84 iya mas itu namanya thrust bearing belinya di online market place, ketik aja thrust bearing kata kuncinya
Ok terimakasih Bang Jhon.
Bang Jhon baik bgt
As drat nya ukuran brp mas?
Divideo komplit mas keterangannya saya pake M20
If i purchase, what price ?
Where you live sir?
Bang jhon table saw nya bisa di pesan gak
Waktu buat produksinya yang belum ada om🙏🙏
Itu di jual brapa om kalo pakai dinamo 1pk
Karya om jhon sama om helmi emang top
@@ariefjambon3994 makasih omqu
Di tunggu juga karya2 selanjut nya
jual yg udah jadi gak ya? pemula nyimak nya malah tambah mumet
Another nice copied project. Do you actually make anything yourself? Or is everything copied and then claimed by you as your own?
Just blatant copying stuff without giving credit.. This is a John Heisz design...