Carrier bearing and u-joint replacement 2006 Tundra Double Cab

Replacing a carrier bearing and u-joint on a 2006 Tundra Double Cab 2wd.
Bearing: Spicer 5002334 purchased on Ebay for 85.15
U-Joint: Spicer grazable purchased at O'Reilly for $25
Tools
O'Reilly Ball Joint/U-joint Press 67045
Puller 2/3 Jaw Puller 5 Ton 67021
15/16 Socket needed to get the nut holding the yoke.
Filmed on iPhone 11
Good luck!. Took me 3.5 hours total with a run to O'Reillys in there. Just replace the u-Joint, should have purchased that first. Getting the u-joint re-inserted took a lot longer than I think it should have, just squeeze it in and get the lock washer in. I was worried about using too much force. Just do it.

[@aprillmae86]

Be cool to have a remove a u-joint video. I'm sure it kicked your ass cus it's kicking mine

[@mih0001]

it’s an awful job and my phone was dead. Make sure you have the truck chocked in place before you pull them since park won’t hold it still without a drive shaft.

[@305GARAGE]

Thanks for sharing

[@tipdog36]

No grease???

[@naturemaster6252]

hello. did you use a c clamp to remove the u joint?

[@donaldwilson6659]

He used a ball joint press you can rent them from auto parts store.