Mistake from 2:16, on bottom base plate you’ve used radius corners as a reference to position & create 4X holes. In this case the hole pitch is 148mm x 58mm, which should be 150mm x 50mm.
8:00 there is a mistake in this sketch, if you look at the pdf you will see that the dimension of 111 start from the bottom of the part, you placed it on the top face of the base
Keep practice!
Great job ! Thank you !
Good Job Sir,
Thanks
Mistake from 2:16, on bottom base plate you’ve used radius corners as a reference to position & create 4X holes.
In this case the hole pitch is 148mm x 58mm, which should be 150mm x 50mm.
8:00 there is a mistake in this sketch, if you look at the pdf you will see that the dimension of 111 start from the bottom of the part, you placed it on the top face of the base
Thanks :)
pdf pls
hast hben sie auch neue inventor2020 und 2021 video ,und übunggen..wenn sie üngen habe ich freuch mich.
Ich bin mir sicher dass, er keine Deutschkenntnisse hat. Die Zeichnung und der Teil passt auch nicht zusammen beim Resultat.