I'm trying to do the same thing in the stairs of the apartment building I live. Please clarify something to me: all the lights will turn on as each sensor is triggered?
Can you do this with one long led strip and 2 sensors on the wall or under the handrail? I don't have easy access to behind the wall on under stairs, prefer minimal drywall repair.
he's showing multiple lights, it doesn't matter if you only have 1 load or many, it just simplifies installation for you since you only have 1 load. the location of the sensors doesn't matter, however you still need to have access to your live HOT cable coming from the fuse box. the other sensor on the other side of the hall, etc will still get it's power from that same HOT cable , you are running the power from the fuse box to each sensor, the load is simply something in between shared in common with each sensor. if you really want less repairs look up wireless automation sensors, like Shelly etc, you will wire up each relay to the load and control everything via a wireless switch or your phone, etc. there's cheaper brands on amazon but Shelly is one if not the best for automation
The two sensors have the main line Live connected together as they both need power to work, while the second Live line is run parallel between the two sensor trigger output Live to the four light Live inputs. If you were to use the trigger Live from the first sensor to act as the supply for the second sensor, the second sensor would only operate when the first one was triggered. The trigger Live that goes to each light is only live when a sensor is tripped. (Caveat:- Treat ALL wires as live, even if they are not connected to a supply. Some other part of the system could be live and supply power at any moment, especially with PIR sensors.
Each motion sensor is independent of each other similar to single pole switches with a timer wired in parallel, the only thing they have in common is the load (lights) so if you set the sensor at the top of the stairs for 1 minute and the sensor at the bottom for 2 minutes, than whichever sensor you set off first is going to start it's timer countdown. when you get to the other side of the stairs the second sensor will trip causing it's timer to than begin it's own countdown. example you set off the top one first, it will begin a 1 minute countdown until the point it can no longer detect motion, however once you reach the top sensor's detection range it will than basically override the 1 minute shutoff for it's own setpoint of 2 minutes until it can no longer detect you. basically most people would have both sensors set to the same countdown time unless you need this kind of customization
Not everyone will understand if you say it in writing, it would be better if you say it through mouth talking. Only those who work on this line will understand. No one else will understand beyond this line.
I'm trying to do the same thing in the stairs of the apartment building I live. Please clarify something to me: all the lights will turn on as each sensor is triggered?
Can you do this with one long led strip and 2 sensors on the wall or under the handrail? I don't have easy access to behind the wall on under stairs, prefer minimal drywall repair.
he's showing multiple lights, it doesn't matter if you only have 1 load or many, it just simplifies installation for you since you only have 1 load. the location of the sensors doesn't matter, however you still need to have access to your live HOT cable coming from the fuse box. the other sensor on the other side of the hall, etc will still get it's power from that same HOT cable , you are running the power from the fuse box to each sensor, the load is simply something in between shared in common with each sensor. if you really want less repairs look up wireless automation sensors, like Shelly etc, you will wire up each relay to the load and control everything via a wireless switch or your phone, etc. there's cheaper brands on amazon but Shelly is one if not the best for automation
1 sensor lagane par led ak side se kaam karegi kya?
ok so are there two sensors one at the top and one at the bottom of the stair case and four lights along the stairwell?
yes
great 👍 video
Thank you 👍
Sir why are there two phase wires going to the second motion sensor? Isn’t the one from the lights enough?
here the two sensors
The two sensors have the main line Live connected together as they both need power to work, while the second Live line is run parallel between the two sensor trigger output Live to the four light Live inputs. If you were to use the trigger Live from the first sensor to act as the supply for the second sensor, the second sensor would only operate when the first one was triggered. The trigger Live that goes to each light is only live when a sensor is tripped. (Caveat:- Treat ALL wires as live, even if they are not connected to a supply. Some other part of the system could be live and supply power at any moment, especially with PIR sensors.
Good job 👍🆗
Thanks ✌
How do 4 lights and 4 sensors work?
Explanation method super
Thank you 🙂
Thanks you are now my new teacher I love you videos
@@abangdonald8795 its my pleasure
Can you explain please why you conect two phase in second sensor.
Thank you
١١
Love the video ...what happens if the sensors are set on different settings? Eg: one is on 30 seconds and the other on 10 seconds ?
Each motion sensor is independent of each other similar to single pole switches with a timer wired in parallel, the only thing they have in common is the load (lights) so if you set the sensor at the top of the stairs for 1 minute and the sensor at the bottom for 2 minutes, than whichever sensor you set off first is going to start it's timer countdown. when you get to the other side of the stairs the second sensor will trip causing it's timer to than begin it's own countdown. example you set off the top one first, it will begin a 1 minute countdown until the point it can no longer detect motion, however once you reach the top sensor's detection range it will than basically override the 1 minute shutoff for it's own setpoint of 2 minutes until it can no longer detect you. basically most people would have both sensors set to the same countdown time unless you need this kind of customization
Besta. Dayagam. Good
Thank you so much
what will happen if both the sensors are trigger at the same moment ????
They both start their own countdown.
Hiya just a question to anyone really, do these sensors have a way of adjusting how long after movement the lights stay on??
Yes there will adjustment within the PIR motion senser
What's this lights name?
Led running etc add krdo ...bhot saari chez hogi ...
Can you help me? I want to get the program that you use for electrical mapping
we are used animation.
Thank you.
ഇതിന് എത്രയാ വില
Beautiful video....kaku
Thank you very much
Ok felicitări
good job
Thanks for watching
And nice..... Sir..
Keep watching
I could not understand anything can you speak any thing i can understand i don't understand which is phase and which is offwire
Hello
👌 👌 👌 👌 👌 👌 Super
Thank you so much
Great😊
Thanks 😊
Good
Thanks
nice
Thanks
Super...
Thank you very much
Nice
Thanks
Thanks
Welcome
Se. Ve creativa su instrucciones lastima Q era en inglés slds dsd ste 🇲🇽
sorry i am not understand your language
please tell me Bangla,Hindi,English.
Thanks for watching
vhai switch er vidoe lagbo
i will try to make video on your topic.
Thank you.
Where can l get motion sensor
you can buy online
Soy de Argentina aclaración la linia no va ala iluminación va ala tecla
sorry i am not understand your language please tell me Bangla,Hindi,English. Thank you.
Bien sur
هل يوجد في الحساس تايمر وقت
Please make working video also
i will try
Thank you
Not everyone will understand if you say it in writing, it would be better if you say it through mouth talking.
Only those who work on this line will understand. No one else will understand beyond this line.
Sensor link
you can purchase online we not sell this product
Thank you.
👍👍😊
Thanks for watching
Can you do it actual 🤔
it is stair lighting connection without switch this light is automatic on off. Thank you!
Hi
👍🏽👍🏽👍🏽
Thanks for watching
Wrong information don't try with 2 way switch
👍👍👍👍👍
Thanks for watching
🌹🌹
Thanks for watching
❤❤❤❤
Thanks for watching
@@JrElectricSchool 😊😊
Capishin capishin 😳😶
Thanks for watching
😍
Thanks for watching
Galat wairing ka tarika hai interview me fell hai wire cross❌❌❌
Thank you so much for share your opinion.
Wrong jai
Useless cannot understand.
That’s because your thick
please watching carefully
Thank you.
แคต
nice
Thanks