I had to like it because your video was the only one I saw where anybody ever said anything at all about this bike! Everyone else just shows it and doesn't say anything about it.
@@tzampaola, comprei 2 que parou na alfandega e foi proibido de entrar no Brasil, na terceira tentativa, consegui, chegou hoje. Vou instalar eu mesmo.
Ive got that same bike. My problem is the suspension dont move. Like its just a solid fork. Does the original suspension has some undjustable features? I saw your original suspension actually moves.
Your videos are so great. I bought this bike for a month ago. And already upgraded with everything you recommended 😊 but one question. I'm looking for a bike rack to fit on that bike. Any suggestions? Thanks and keep up the good work.
@@BRichSolution Hi, I will wait for the video but I will ask you after the new fork arrives and you remove the original one to put them side by side to see the size difference between the two. Тhanks.
@@BRichSolution I just picked up my first 20" e bike I had a few 26" ones. I went with the Jansno x50 it moves pretty good going to slap a air fork rear mono air shock and cable activated hydraulic disc calipers.
Hello, I have the Jansno X50, and I would like to put an air fork, do you think it goes well on my Jansno, or do you need something different? I would be very grateful, and also for some editing tips. You’re great, Bye bye.
Yes! You did the upgrade! I plan on doing this in the near future. Was it worth it? Is their a big difference with how the bike handles bumps and potholes now? Thanks for the vid!
@BRichSolution nice that's good to hear. I also noticed on my bike if I change the amp current settings, (p14) it doesn't matter if I put it on 1 amp or 22 amps. It doesn't change anything. Is yours the same way? If I lift the back end and pin the throttle it hits 35 mph either way. I'm also able to get it up to around 28 mph top speed either way with the same torque.
hi rich, for the ouxi v8 should i buy the 20 inch fork or the 26 inch option? and did the star nut comes with one of those forks or did you buy it apart?
Hello Sir, I have to change my bearings and all the parts of the steering column, do you know the sizes? Impossible to find, I looked everywhere i have the same bike and same fork (the new one)
@BRichSolution thx you, you are a reference !! do u know the frame size, I found 28.4 and 30mm, but I have several choices for the bike frame like 44mm-44mm (upper lowe) or like 44-56mm do you know ?
My OUXI V8 fork broke while I was riding it on a regular asphalt road. The wheel got drawn under the bike and I flew over it head first. How did your original fork got broken?
You could reach out to manufacture and ask. I would guess the fork will cost $120 and for $150 you can have adjustable air fork amzn.to/3CGplro that will not bounce and much better option of the stock oil filled fork with no adjustment. The amount of work to replace will be the same
Hello sir, i have a question is it possible to switch the normal display to an yolin yl90th screen if not is there an colour screen that is possible to be put on but have the normal pas settings like the yolin one.
I prefer to use the pwgs that clamp onto the frame, less stress on the already weak axle shaft, a lot of force is exerted on the axle through the engine, axle is already weakened by the motor power cable feeding through one side of it.
Original fork os not air its oil filled with springs. You can buy it from manufacturer for $130 or buy this adjustable air fork for $150 which is much better ride then stock fork
@@BRichSolution Thank you so much for the information and for what you are doing, services in Poland mega expensive and thanks to you not only do I learn but I have fun fixing it. You are super ♥️
Yes, the Amyet G60 has the same fork as the Ouxi and wires run thru bottom crown and welded to shock so you need to cut the crown like i did or pull all the wires thru
I had to like it because your video was the only one I saw where anybody ever said anything at all about this bike! Everyone else just shows it and doesn't say anything about it.
I have several more videos about the Ouxi v8
Great job. Guess with these upgrades this bike is almost perfect (at least for me).
Yes I would agree. New hydraulic brakes & air fork its great ebike
These look much better then the stock forks I definitely will try these thanks B Rich!
Looks better but the ride is much better
Here by your suggestion. I love the way you do content I send people to you for the things you already cover
I appreciate the kind words and support
Looks so good, the standard suspension isnt the best so might change to that
Its a nice upgrade along with hydraulic brakes completes this bike
OMG. i just bought the same one 2 wks ago. What a coincidence!
Not much choice out there for the price point. It took me long to removed the fork then to install
Diego, a sua já chegou? Depois deixa um feedback da qualidade, se você conseguiu instalar sozinho ou se precisou levar em um mecânico
@@tzampaola, comprei 2 que parou na alfandega e foi proibido de entrar no Brasil, na terceira tentativa, consegui, chegou hoje. Vou instalar eu mesmo.
damn bro that’s a tight upgrade fr; great job and thanks for sharing
Thanks for the feedback and I hope this helps others out
Great work! Thank you for your video's. Also ordered the hydraulic brakes a couple days ago.
Hydraulic brakes and fork upgrades males the bike complete
Nice work its great to see the bike evolve can you make a tutorial on maybe geting a throttle instead of the small one keep up the good work
You interested in the replacing the half twist throttle with a full twist throttle?
@@BRichSolution yes it seems a big upgrade
love your videos its very useful thank you❤️❤️👍🏽👍🏽
Glad i can help others out
Do you think there are bigger disks for the brakes? Would that be a possible future install?
Have you upgraded to hydraulic calipers? The stock mechanical brakes are terrible going to hydraulic brake will stop the bike in half the distance
Great as always! Thanks for vid
Just curious which frame locks you found more suitable for your ebikes?
These folding locks are compact and don’t rattle around amzn.to/430iftC
Ive got that same bike. My problem is the suspension dont move. Like its just a solid fork. Does the original suspension has some undjustable features? I saw your original suspension actually moves.
Stock fork has no adjustment hence the reason for the air fork
Gracias amigo
Your welcome
Your videos are so great. I bought this bike for a month ago. And already upgraded with everything you recommended 😊 but one question. I'm looking for a bike rack to fit on that bike. Any suggestions?
Thanks and keep up the good work.
See the aliexpress ad as they sell ouxi with cargo rack. Try chatting at ask where to buy cargo rack. s.click.aliexpress.com/e/_DeigkJ9
@@BRichSolution Thanks :D
Can you provide information about changing engine sensors and where can you buy parts?
The cadence sensor on the crank?
@BRich Hi ,the air fork you installed on the Oxy, is it compatible (size) or the same for the Ridstar Q20 model?
Yes same size and procedure. Doing the q20 this week if you want to wait for the video
@@BRichSolution Hi, I will wait for the video but I will ask you after the new fork arrives and you remove the original one to put them side by side to see the size difference between the two. Тhanks.
The link you shared for the air forks is for a 26x4 not a 20x4 size
Thank you. Link updated amzn.to/3HKLF6n
@@BRichSolution I just picked up my first 20" e bike I had a few 26" ones. I went with the Jansno x50 it moves pretty good going to slap a air fork rear mono air shock and cable activated hydraulic disc calipers.
if out of stock on Amazon then buy on AliExpress s.click.aliexpress.com/e/_DEM8Nu5
Would there be anyway to fix the stock forks ? everytime i get on the seat the forks go down, and no, it’s not cause i’m big lol .
No, need to upgrade fork to adjustable air fork; hence the video
Hello, I have the Jansno X50, and I would like to put an air fork, do you think it goes well on my Jansno, or do you need something different? I would be very grateful, and also for some editing tips. You’re great, Bye bye.
Yes the jansco fork os the same as ouxi v8 front fork. Same process
Yes! You did the upgrade! I plan on doing this in the near future. Was it worth it? Is their a big difference with how the bike handles bumps and potholes now? Thanks for the vid!
Big upgrade in the ride quality especially offroad. With the hydraulic brake upgrade qnd new fork the bike is complete
@BRichSolution nice that's good to hear. I also noticed on my bike if I change the amp current settings, (p14) it doesn't matter if I put it on 1 amp or 22 amps. It doesn't change anything. Is yours the same way? If I lift the back end and pin the throttle it hits 35 mph either way. I'm also able to get it up to around 28 mph top speed either way with the same torque.
hi rich, for the ouxi v8 should i buy the 20 inch fork or the 26 inch option? and did the star nut comes with one of those forks or did you buy it apart?
20” fork and star nut comes with the work
@@BRichSolution thankyou so much
would this fit on the yolin, im thinking the super 73 forks would be good but are they over priced for 800 aud these are going for 260
I believe so. You will need a stem tube riser on yolin. I have the parts and will install this week on my yolin and make video in about a week
Hello Sir, I have to change my bearings and all the parts of the steering column, do you know the sizes? Impossible to find, I looked everywhere i have the same bike and same fork (the new one)
Standard size 28.4mm on top and flared to 30mm or 1 1/8” race
@BRichSolution thx you, you are a reference !! do u know the frame size, I found 28.4 and 30mm, but I have several choices for the bike frame like 44mm-44mm (upper lowe) or like 44-56mm do you know ?
My OUXI V8 fork broke while I was riding it on a regular asphalt road. The wheel got drawn under the bike and I flew over it head first. How did your original fork got broken?
Kid riding bike hit curb
Hello sir do you know where i can buy the standard ouxi suspension cause i had an litle crash and now the suspension is not in good shape anymore
You could reach out to manufacture and ask. I would guess the fork will cost $120 and for $150 you can have adjustable air fork amzn.to/3CGplro that will not bounce and much better option of the stock oil filled fork with no adjustment. The amount of work to replace will be the same
Hi , with this bike cant you keep the crowns like on the engwe and slide the new fork into the ouxi crowns?
Yes retain the crowns
My stock tube has gotten is it repairable or should I go ahead and replace? Thanks
I would replace
What is the difference between the original and the new fork?
Old fork is oil filled not adjustable the new fork is Air and full adjustable
Hello sir, i have a question is it possible to switch the normal display to an yolin yl90th screen if not is there an colour screen that is possible to be put on but have the normal pas settings like the yolin one.
You would have to replace the controller plus screen to get a color screen on the Ouxi
You mean to tell me that one screw is holding the fork on?
One screw on the stop of the stem, all bikes are like that
The link to the Rhinowalk bag doesnt work. Could you please fix this?
Here is link to cargo bag amzn.to/3Qfj2TQ
Is there any way to add foot pegs on the ouxi? I own one but don’t know where to find and how
Pegs like this should bolt on to rear axial. amzn.to/44gUQo1
I prefer to use the pwgs that clamp onto the frame, less stress on the already weak axle shaft, a lot of force is exerted on the axle through the engine, axle is already weakened by the motor power cable feeding through one side of it.
Is this easy for an 14 year old to install
Hardest part is removing old fork and cutting crown to remove wires
Hey B rich. Do you know where I can buy yhe orginal air fork?
Original fork os not air its oil filled with springs. You can buy it from manufacturer for $130 or buy this adjustable air fork for $150 which is much better ride then stock fork
Can you put suspension on the rear?
No, can’t add rear suspension. Look at Amyet G60 for full suspension bike amzn.to/4ePInfZ
hi, so i bought the same air fork frok bolany, but with the star nut that came from the box it wouldnt fit in. any solution?
Star nut is interference fit and jams down in the stem tube. You can take it to any bike store and the techs can install the star nut in tube
@@BRichSolution okay so its normal to have it slightly big than the tube, i just can go to bike store
the tire says it 20x4, but its actually 16x4. Have you tried using motor cycle 16x4 tires? Because the original tires are too thin.
The ebike has 20x4
@@BRichSolution I think chinese tire used different way of measuring, because the rim diameter is 16 inches
hi rich, i installed the air fork and now it feels so heavy on the steers to move is it because i put in too many air?
Steering tube bolt is too tight caused tight steering to be hard. Loose the bolt on top of the steering 1-2 turns
@@BRichSolutionand i think i didnt put the pieces before input the top crowns, because it wasnt there with the stock fork, is maybe the problem there?
and by the pieces i meant the cap, conical races etc.
Would these work on the ridstar q20?
Yes it will work. Will have video in a week
Can i swap the Fork from the V9 on the v8?
Ya it will fit but wires run thru crown so it makes it difficult to change seen video
@@BRichSolution Thank you!
I need to buy 20inch or 26inch for Ouxi v8 2.0 ?
20” wheel version
@@BRichSolution Thank you so much for the information and for what you are doing, services in Poland mega expensive and thanks to you not only do I learn but I have fun fixing it. You are super ♥️
Does this fit the amyett g60?
Yes, the Amyet G60 has the same fork as the Ouxi and wires run thru bottom crown and welded to shock so you need to cut the crown like i did or pull all the wires thru
@@BRichSolutionI’m on my other account thank you so much! I just ordered it today is there anything I should know