If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne
Looks great Wayne, took me about 30 minutes to do mine last night, my video went up this morning, must say marrying the body to the chassis was a dream compared to the delorean
Just done Pack one and every thing went fine just two screws I had trouble with going round and round but one was the bonnet lock and the other was one of the front lights. It was fine as the lights have 3 more screws in so it was secure and tight
Hi Wayne your not the only one i cut a cable when installing the wing also so had to make a repair i used blu tack in the end to keep the wires away from the screw holes .
Fender. Fender vent (which is useless in the 3rd gen). Inner fender plastic, also known as a guard or shield depending on the car manufacturer. Also, when I'm opening bags like those with a razor blade, i generally hold the blade still and pull the bag through it. It's not a taped box.
Can I recommend opening the screw bags by peeling off off the stickers holding them closed? Might take a little longer but you won’t lose half as much blood!
Hi Wayne. As usual brilliant videos and they’ve been very helpful when sometimes the magazines aren’t so clear when you’re using photos for source reference. I’ve completed up to issue 86 and all working fine. But I noticed you managed to get the body onto the chassis, which I’m struggling with. Near the front wheel arch area seems quite tight when coming over the dashboard and chassis and I don’t want to force it down. Any advice?
Good morning hope all ok here now music free time to see you and Darren Thomas and beautiful day out with you all and friends and family are all good looking forward Wales ❤❤❤❤❤❤😂😂😂🎉🎉🎉😢😢😢😮😮😮😅😅😅😅😅😊😊❤😂😂🎉😢😮😮😅😅😅😊😊😊❤❤😂😂🎉😢😮😮😅😅😊😊😊❤❤😂🎉😢😢😮😅😅😊😊❤❤😂🎉😢😮😅😊😊❤❤❤❤😂😂🎉😢😢😮😅😅😊😊😊
That must have been frustrating to take parts off the car to fix the electrics. I had to do the same thing to the Porsche 917 - the speaker worked Intermittently. That was easy to fix ending up replacing the board. But now I'm having the same problem on the Dodge Charger; and it's too late to fix that! When completed it looks like the car will need a good wax job.
Love your work...if you want, come and check out KITT in a bit larger form. Its a very unique Knight Rider car that will be on the road as Go Kart soon.
I’ve just reached this stage and wanted to ask; do your headlights fold all the way back down? Mine come up fine but I have to give them a little prod to get them to sit flush with the bonnet again. And I don’t think there’s enough wire length on the scanner to make connecting it not annoying/scary!
Wayne, I watch a large majority of your videos but on this one the audio seemed to have a bit of distortion. Not sure if that's due to the mic placement of something else.
WAYNE!! I hope you can spare the time to answer this one - I've just spotted that Blockbuster wall hanging behind you in THIS video - I would love to know where you got it please? 🙏🏻
I hope you see this as i dont know how to message directly but does your model have an issue with the model dying when light and sounds button is activated
Hi Wayne, have you heard at all through the grapevine if we are getting a Perspex display case for this? I’m looking into buying one, but don’t want to spend £100 on one if we get one included :) kind regards mate
Right that’s what I thought. I work for a Perspex company in Colchester Essex called Project Plastics. We fabricate all sorts including display cases. So if you wanted to maybe shout out to your subscribers they may be interested in that. I know my boss would appreciate the custom massively. Thanks for the information though bud, it is rubbish that they don’t offer it as an option.
LOLOLOL 🤣🤣🤣 I'm so sorry...i don't mean to laugh at you cutting yourself... But when you said that you cut yourself properly this time... Is there a right way better then a wrong way...lolol Are you doing surgery there mate ..lolol I carefully open each bag if its held closed with a sticker or it's zip locked... That way i can reclose the bag and I know what the screws are in it... Then at the end of the build i have my screw box labeled for each build I'm doing...with all the screws used in that specific build and i unload them in that box so i know what I have in case I need them for the old builds or something else new...lololol But hope your finger 🤞 is fine mate... Best regards always across the pond...
If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne
Like video
Wayne my chemotherapy seems to be working this time thankfully 😊
Excellent news
It’s dangerous building model cars!
Great Job! Dont worry about the finger happens to us all!!
great video hope nurse mrs wow came to your aid
I am waiting for my pack to be delivered, but it is so good to see body parts going on,
Looks good in the end ,gotta bring back the injury board.
Congrats Wayne on the build. 😀
Very cool!! 👍👍
Thanks!
coming on great now! If i could get hold of some cut resistant gloves for you, i would send them to you .
I can’t wait to start doing this model
Blood for the Blood GOD!!!!!
Well done on repairing the wiring,
Looks great Wayne, took me about 30 minutes to do mine last night, my video went up this morning, must say marrying the body to the chassis was a dream compared to the delorean
Blood for the Blood God !
I still need to catch up I have a backlog I think from stage 54 to 86 a lot of building 🤣. Great Video as always
Wayne, still waiting for a blooper reel with a collection of your best calamitous events.
I love your videos
Just done Pack one and every thing went fine just two screws I had trouble with going round and round but one was the bonnet lock and the other was one of the front lights. It was fine as the lights have 3 more screws in so it was secure and tight
Hi Wayne your not the only one i cut a cable when installing the wing also so had to make a repair i used blu tack in the end to keep the wires away from the screw holes .
Fender. Fender vent (which is useless in the 3rd gen). Inner fender plastic, also known as a guard or shield depending on the car manufacturer.
Also, when I'm opening bags like those with a razor blade, i generally hold the blade still and pull the bag through it. It's not a taped box.
It is exciting to see the car almost done, I just received sections 47 to 50. I still have a long way to go
Can I recommend opening the screw bags by peeling off off the stickers holding them closed? Might take a little longer but you won’t lose half as much blood!
Wayne it seems you are as accident prone as me 😂
Wayne you need safety scissors mate or you’ll end up with no finger tips😂
And glitter and pva glue 😂....
So there are more stages than there were episodes! Lol
Haven't started mine yet
The models are really detailed though I’ve just received my first gt40 packet bcs you inspired me to start
you need a blood, sweat and tears reward with KITT. Second time cutting fingers with KITT. lol
I changed the horrible yellow headlights to white. They look so much better and more screen accurate.
now all you need to have to finsih off the model all together is a figureine of Michael to sit in the drivers seat... LOL
Fender.
Hood. :)
Completed this last night however when attaching the side panel I screwed in to one of the cables now having to wait for a replacement cable
well-done Wayne 😃🏥❤🩹
Hi Wayne. As usual brilliant videos and they’ve been very helpful when sometimes the magazines aren’t so clear when you’re using photos for source reference. I’ve completed up to issue 86 and all working fine.
But I noticed you managed to get the body onto the chassis, which I’m struggling with. Near the front wheel arch area seems quite tight when coming over the dashboard and chassis and I don’t want to force it down. Any advice?
I ensured the sides went over the dashboard trims and pushed down slightly angled to.the back
Well I suppose it's better than stabbing yourself with the screwdriver Wayne🤣
Great vid 🙏💪💞🍺👍🇦🇺🐕
Like video
Hi wayne u had anything for ghostbusters yet
It’s on the way
@@WorldofWayneUKCool
Good morning hope all ok here now music free time to see you and Darren Thomas and beautiful day out with you all and friends and family are all good looking forward Wales ❤❤❤❤❤❤😂😂😂🎉🎉🎉😢😢😢😮😮😮😅😅😅😅😅😊😊❤😂😂🎉😢😮😮😅😅😅😊😊😊❤❤😂😂🎉😢😮😮😅😅😊😊😊❤❤😂🎉😢😢😮😅😅😊😊❤❤😂🎉😢😮😅😊😊❤❤❤❤😂😂🎉😢😢😮😅😅😊😊😊
That must have been frustrating to take parts off the car to fix the electrics. I had to do the same thing to the Porsche 917 - the speaker worked Intermittently. That was easy to fix ending up replacing the board. But now I'm having the same problem on the Dodge Charger; and it's too late to fix that! When completed it looks like the car will need a good wax job.
Why do the lights look they come out yellow instead of white. Is there a way to make the bulb white
It's actually white. The camera is making it look yellow
Love your work...if you want, come and check out KITT in a bit larger form. Its a very unique Knight Rider car that will be on the road as Go Kart soon.
Heh heh, Goth Car bites again. Well technically it was the scalpel but I bet Goth Car encouraged Scalpel to do it.😂
Hi Wayne just a quick question for you, what are all the names at the end of this video many thanks Paul from mow cop Cheshire 👍👍
All my Patreons who have subbed to the Patreon channel
I’ve just reached this stage and wanted to ask; do your headlights fold all the way back down? Mine come up fine but I have to give them a little prod to get them to sit flush with the bonnet again.
And I don’t think there’s enough wire length on the scanner to make connecting it not annoying/scary!
I have to nudge down my left one as I have a breakage in the headlight mount. Other one is fine
@@WorldofWayneUK Thank you for the reply! I’ll have to have a fiddle with the cog positioning etc and see if I can sort it
yellow lights are the original ? are the original not more white light ?
These are.more white the camera is making them look like this.
Thought I'd seen the last of blood after retirement from haematology
😂😂
@@WorldofWayneUK are you putting the board up again day 1 blood
Wayne, I watch a large majority of your videos but on this one the audio seemed to have a bit of distortion. Not sure if that's due to the mic placement of something else.
Yer I noticed it was a bit tinny. No idea why
Well you are a cut above the rest
😂
Thats why i dont use the scalpel i just pull the sticker off also will you be putting the enterprise D playlist back on
I
Will be starting again hopefully
@@WorldofWayneUK i got my next issue with enterprise D 3 days ago
Got a problem my scanner won't light up when all the wires are hocked up but will when connected to the battery pack straight
Sounds like the power draw is dropping. I heard there are capacitor issues on the board but I would ask in the Facebook group just to be sure
WAYNE!! I hope you can spare the time to answer this one - I've just spotted that Blockbuster wall hanging behind you in THIS video - I would love to know where you got it please? 🙏🏻
Mrs World of Wayne got it from www.aliexpress.com/i/1005005289046472.html
@@WorldofWayneUK Excellent thank you! :)
I hope you see this as i dont know how to message directly but does your model have an issue with the model dying when light and sounds button is activated
Nope. Ask on the Facebook group as I think others may have encountered this
How do u get the money for these things there stupidly expensive
In what stage do get the body of the car
It came a few packs back
Hi Wayne, have you heard at all through the grapevine if we are getting a Perspex display case for this? I’m looking into buying one, but don’t want to spend £100 on one if we get one included :) kind regards mate
I don't think so. I mean I'm not
Right that’s what I thought. I work for a Perspex company in Colchester Essex called Project Plastics. We fabricate all sorts including display cases. So if you wanted to maybe shout out to your subscribers they may be interested in that. I know my boss would appreciate the custom massively. Thanks for the information though bud, it is rubbish that they don’t offer it as an option.
Can you drop me an email at wayne@worldofwayne.co.uk with the details and I will be sure to mention it
which part-stage have the karosserie part ? and i hope its not plastiv other parts are metal ^^
Karosserie?
@@WorldofWayneUK translate at google give answer what i mean ^^ karosserie-body but allready i found it if i not wrong with part 67 its comming
And how much all together will I spend sir 😊
All these models come
In around £1200
@WorldofWayneUK Wayne I haven't gotten the body yet and I'm on stage 50
When do I get the body of the knight rider build and what issue number is it please
😮"Medic" you need a real E.T on standby Ouch 😂
Chuckling at the accident, mainly because my wife thinks I should start a RUclips channel called The Daily Accident
Knight Ryda?
Stott? Pots? Ovuh, Ambuh, Scanna? Cah? Heeyuh, Theyuh....
Where'd the letter R go????
LOLOLOL 🤣🤣🤣
I'm so sorry...i don't mean to laugh at you cutting yourself...
But when you said that you cut yourself properly this time...
Is there a right way better then a wrong way...lolol
Are you doing surgery there mate ..lolol
I carefully open each bag if its held closed with a sticker or it's zip locked...
That way i can reclose the bag and I know what the screws are in it...
Then at the end of the build i have my screw box labeled for each build I'm doing...with all the screws used in that specific build and i unload them in that box so i know what I have in case I need them for the old builds or something else new...lololol
But hope your finger 🤞 is fine mate...
Best regards always across the pond...
Well we cant calll you a little Aussie bleeder you have been away to long
😂😂
had a nightmare with this pack didn't enjoy it at all almost flung in in the bin getting the screws in everyone was a nightmare😤😡😠
Your channel became so scattered I quit watching.
Thanks for your time here anyways
Nice build Wayne, can you please do a line up of finished models together one day in a post 🦘🇦🇺👍❤️
I Love your videos