First of all, thanks for your prompt response, do I have a way to send you that part of the model as it is so that you can compare it with the one you show in the tutorial? bother and I await your response. Thank you.
Dear, I follow your Mustang tutorial, it's going well, I do everything as you indicate, but I can't modify (and you don't explain it), the sides of the car where the air intakes are, in your work there are two lines, the upper one that part from the air intake to the front wheel arch, and a lower line that also starts from the same air intake to a little less than half of the car, (see minute 11:58 approximately of the video), when before it was different or in such a case as ersta my design. I want it to look like it is in your design at 11:58 of the video timeline, can you help me? I already tried different ways without success and I don't want to follow the tutorial without first correcting this defect. If you can't or don't want to, I have to understand it, but I like the way you explain and I'm putting all my effort into finishing this marvelous work, I await your response. Sorry for the questions if they bother you. Best regards.
Hi, it’s really hard to understand without seeing what you actually have, but if you insert some points, then you can actually add a line if it’s missing.. and then manipulate this line as you need. Anyway, if you skip this part, and I’m pretty sure by the end of your model you will be able to fix it. Some details on the actual car you can remove, edit or add even if design is completely finished. Like one guy from Los Angeles, he made 3-D scan of his dream car made out of clay that can fit on his palm of the hand. And we actually making now it as a real car in fusion 360. So we keep having meetings and adding some stuff like the air intakes even after we finalize the design.
Awesome
Helpfully video
Thanks
Keep it up the good work
Thanks
great bro
Thanks
First of all, thanks for your prompt response, do I have a way to send you that part of the model as it is so that you can compare it with the one you show in the tutorial? bother and I await your response. Thank you.
Dear, I follow your Mustang tutorial, it's going well, I do everything as you indicate, but I can't modify (and you don't explain it), the sides of the car where the air intakes are, in your work there are two lines, the upper one that part from the air intake to the front wheel arch, and a lower line that also starts from the same air intake to a little less than half of the car, (see minute 11:58 approximately of the video), when before it was different or in such a case as ersta my design. I want it to look like it is in your design at 11:58 of the video timeline, can you help me? I already tried different ways without success and I don't want to follow the tutorial without first correcting this defect. If you can't or don't want to, I have to understand it, but I like the way you explain and I'm putting all my effort into finishing this marvelous work, I await your response. Sorry for the questions if they bother you. Best regards.
Hi, it’s really hard to understand without seeing what you actually have, but if you insert some points, then you can actually add a line if it’s missing.. and then manipulate this line as you need.
Anyway, if you skip this part, and I’m pretty sure by the end of your model you will be able to fix it. Some details on the actual car you can remove, edit or add even if design is completely finished.
Like one guy from Los Angeles, he made 3-D scan of his dream car made out of clay that can fit on his palm of the hand. And we actually making now it as a real car in fusion 360. So we keep having meetings and adding some stuff like the air intakes even after we finalize the design.