Thank you.. This helps a lot. I took the delivery of my CB350 RS from Mumbai and drove it to Pune recently. After I reached Pune, it was as if me and the bike has come out from a mud fight.. 🤦🏻♂️
@@anil9985 Well, Honda says that it’s part of the design and appeal of the bike. I personally like the styling of the bike, but need to modify it a bit to make it more practical for a day-to-day use.
@@HappyGoLucky_03 exactly the design and styling of the bike is exceptional and reason we bought this. But this does not suit our Indian road and considering that they should have released after market accessories. Let's hope 🤞
Main stand pe khadi gaadi me gear mat lagao kyunki ecu me abs error code generate ho jata hai. Fir abs malfunction karta hai. Showroom jaake ecu diagnosis test karwana padega & error code delete karwana padega.
Filhal koi error display nhi hua hai...1st service is still pending...agar kuch hua hoga toh I will check during my 1st service. By the way thanks for sharing this information 🙂👍🏻
@@Vayu_Vlogs Jab tak ecu laptop se connect karke service centre wale diagnostic test run nahi karenge pta nahi chalega. But gaadi drive krte waqt abs malfunction karega to aapko samajh aa jayega ki system me dikkat hai.
4:55, i think it should be reverse on what u said, flat side should be uppper side & curvy side should be douwn side cause i've seen few bikes similarly & in amazon aswell photos show in similar way. Need a back rest bhai, saw one sleek back rest in YT shorts provided in some HYD showroom after market wala. after google browsing, someone in reddit gave number of that showroom but its not working, any other suggestions?
It protects 90% of mud as compared to without mudflap. Carbon racing has made mudflap for RS only. They would have tested it well, so if you want you can buy that mudflap.
Nowadays we get the highness front mudgaurd for this which might help. I am just concerned about the rear. Does the tyre hugger help protecting the pillion and the rider from mud. Planning to buy CB350 RS, but if this is an issue i might have to think twice. My second option is the classic 350. And what is the condition of your bike right now and how is it performing against mud?
Excellent video. The details provided are wonderful. Please let me know how much you paid for the front mudguard extension and the crash guard extension
Bro nice video please tell me how u setup brightness in console because day visibility is so dull due to sun need more brightness in highness is possible but for cb350rs how to do
Console system is same in both highness and RS.. if you know how to do it in highness, then follow same step in RS. I am comfortable with brightness, so I haven’t thought of changing it. If I get to know then sure will let you know.
Really helpful video. I got the rear mud guard but not able to find the front extender. Tried on couple of RE showrooms but they don't have it in stock. Where else can I get it. Can anyone help me get this thing.
I have seen video where nowdays bigwing service center itself are providing this solution from their service center. Still if you have any concern with warranty, you can change your front mudgard to stock and then claim.
if you drill the mudguard and fix extension then the warranty of mudguard will be voided but it will not void the warranty of whole bike . I got this info from showroom.
Front mudguard extender is of Royal Enfield Interceptor model. I gave a try and it fitted on my bike. You can give a try. But if you are talking about rear mudguard then it’s universal mudguard which can fit into any bike.
Yes, Honda provides saddle stay (Common for both Highness & RS) as an accessory which can be installed on both side for saddle bags. But look wise it is simple and I am looking for different design with tail rack. Once I get good option, I will get it installed and will make video of it.
@@Vayu_Vlogs yaah thanks ...I feel that the saddle bags will hit the silencer in RS ... Will be waiting for u r video .. coz based on that Oly I have to decide to with RS or Hness 😀..
I have zana crash guard and it does not touch the guard at any situation. Some ppl have replaced fibre front mudguard of RS with H’ness black metal mudguard. You can think of it in future but for now you can bear this minimum touch.
Now it doesn’t splash on pillions back ..but sometimes from rear tyre side it splashes till seat or pillion calf level only that too if it is raining heavy or if there is mud/slush and if bike is running at high speed.
It does contact only on speed breakers when we are speed but dt too minor. I don’t see any damage sign on my front guard till now. Just make sure you have bolted properly without any gap.
Hi buddy, Can you tell me how firm does the rear mudguard fits? As it’s only fits on central screw it will eventually fall down? Have you experienced the same
How much the front extender of continental gt cost? The price showing in the link of description is 399 but i called royal enfield, they saying it cost only 91 rs for continental.
Yes continental mudflaf is around 90, but most of ppl are not getting at their nearest Royal Enfield service center. So I have shared carbon racing link who have made front Mudflap specially for Honda CB350.
Information is too useful. I am also searching for the solution. Further can you please tell me how comfortably rear tyre hugger fits ? Do it cause any problem ? Hope it is not touching number plate tail in case suspension gets compressed by 2 inches while riding.
Hugger fits well and I haven’t experienced hugger touching tail plate. I usually ride alone so I might haven’t face but since tail plate section is flexible, so with pillion also if it touch it won’t create much issue.
Checkout this link bandidospitstop.com/products/universal-mudguard Or you can search for Universal Tyre Hugger For Bikes on Amazon.com Do subscribe to my channel for more content.
Bro I love this bike but my brother is saying to buy highness instead of Rs because pillion is comfortable in highness so do you ride with any women as pillion and how was her experience.
No I never took any women as pillion so can’t share that experience. But yes RS pillion seat height is more as compared to highness. Installing back rest would give some comfort but not good as Highness.
Good Information, but I need one help please put the links to buy these products that will be helpful, I need to buy all 3 products,. Good keep going 👍.
I didn't like the strip design tail rack and back rest which you see currently in youtube video. I like pipe design like Himalayan tail rack, so waiting for such product from zana.
Both has same engine. I liked RS look more as compared to Higness as I didn't want chrome parts much on bike. After market ccessories is more of Highness in market as compared to RS.
Bro u made a very good video, this is what exactly many who own RS are waiting to see.
Even I was searching same, but I didn't got. So I created this video for others to try as well.
Yess👍
Thank you.. This helps a lot.
I took the delivery of my CB350 RS from Mumbai and drove it to Pune recently. After I reached Pune, it was as if me and the bike has come out from a mud fight.. 🤦🏻♂️
🤣🤣 same here
Same with every CB350 owners.. Try this and see the difference.
Exactly.. Honda has just made a mess on this particular thing. Hope this will be corrected
@@anil9985 Well, Honda says that it’s part of the design and appeal of the bike. I personally like the styling of the bike, but need to modify it a bit to make it more practical for a day-to-day use.
@@HappyGoLucky_03 exactly the design and styling of the bike is exceptional and reason we bought this. But this does not suit our Indian road and considering that they should have released after market accessories. Let's hope 🤞
Exactly what I needed. Bless you man.
Need such blessings and support. Do subscrb if you like my video and for more content on bikes.
Bhai you will be blessed by all RS owners
🤩🙏
@@Vayu_Vlogs where did you buy it from.. online website ka link share karo
The only video that provides a solution to this. Excellent!
Thanks 🙂
Main stand pe khadi gaadi me gear mat lagao kyunki ecu me abs error code generate ho jata hai. Fir abs malfunction karta hai. Showroom jaake ecu diagnosis test karwana padega & error code delete karwana padega.
Filhal koi error display nhi hua hai...1st service is still pending...agar kuch hua hoga toh I will check during my 1st service.
By the way thanks for sharing this information 🙂👍🏻
@@Vayu_Vlogs Jab tak ecu laptop se connect karke service centre wale diagnostic test run nahi karenge pta nahi chalega. But gaadi drive krte waqt abs malfunction karega to aapko samajh aa jayega ki system me dikkat hai.
Any update on the front mud guard. Has it solved the problem?
I follow you
Hello sir kya ise sp125 bs6 bike me laga sakte hai
Rear mudguard - Yes
It’s universal mudguard which can be fitted on any bike rear wheel axle .
Nice mudguards which do not take away from the look of the bike🔥🔥🔥
The best modifications reported so far 👌
Thanks Sir 🙂
Thank god finally found solutions here ...♥️ Informative video for any rs owner
Bhai kichad ke gaddhe me pichla tyre khada karke test karna tha . Mudguard lagane ke pahle piche se kichad kya rider ke upar tak aata tha ?
Thanks a lot dost 🙌🏻😊 very very Nice and Extremely Helpful 😊👍🏻
Thanks 🙂👍🏻
Cannot find the front mudguard extender from the link of amazon you provided...
Please need help...i am really facing problems.
Even I didn't get online. I have purchased it from bike accessories market. You can check at any Royal Enfield Genuine Accessories Store near you.
4:55, i think it should be reverse on what u said, flat side should be uppper side & curvy side should be douwn side cause i've seen few bikes similarly & in amazon aswell photos show in similar way.
Need a back rest bhai, saw one sleek back rest in YT shorts provided in some HYD showroom after market wala. after google browsing, someone in reddit gave number of that showroom but its not working, any other suggestions?
You can buy Honda original back rest.
Bro any new update about the mud throwing, how is the mudflap, is it catching the muds and protect the bike
It protects 90% of mud as compared to without mudflap. Carbon racing has made mudflap for RS only. They would have tested it well, so if you want you can buy that mudflap.
Is it worth using RE mudflap
Yes I am using it from more than 2 yrs now.
Nowadays we get the highness front mudgaurd for this which might help. I am just concerned about the rear. Does the tyre hugger help protecting the pillion and the rider from mud. Planning to buy CB350 RS, but if this is an issue i might have to think twice. My second option is the classic 350. And what is the condition of your bike right now and how is it performing against mud?
Excellent video. The details provided are wonderful. Please let me know how much you paid for the front mudguard extension and the crash guard extension
Thank you 🙂. Mudguard price and other details you can check on video description.
Also you can check my Crash Guard video for more details.
Thanks a ton for sharing this video. 👍 good job
😁 Thanks
Excellent video man Keep up the good work thanks
Bro nice video please tell me how u setup brightness in console because day visibility is so dull due to sun need more brightness in highness is possible but for cb350rs how to do
Console system is same in both highness and RS.. if you know how to do it in highness, then follow same step in RS.
I am comfortable with brightness, so I haven’t thought of changing it. If I get to know then sure will let you know.
@@Vayu_Vlogs bro but in highness it have toggle switch in RS neither we can toggle
Make a video to show how the extension works in mud and dirt water
These is the best fix ..bro .
Can thid be fixed in othrt bikes as well ? Like rtr 200/160 ?
Its universal mudguard and fits on any bike (wheel axle).
Waah bhai mazza aa gaya
भाऊ एक नंबर ❤️
Very good bro keep it up Just subscribed ❤️❤️❤️
Thanks Bro 😊
@@Vayu_Vlogs ❤️❤️
Bro from where did you buy the mud flap?????
From local bike spare part shop.
You can check at Royal Enfield Genuine Accessories shop near you.
Really helpful video.
I got the rear mud guard but not able to find the front extender. Tried on couple of RE showrooms but they don't have it in stock.
Where else can I get it.
Can anyone help me get this thing.
CarbonRacing is coming up with new one only for RS. You can check their page for more updates.
Why honda not doing this ?
Does tgw warrenty damages if we install the front mud guard extender with screw?
I have seen video where nowdays bigwing service center itself are providing this solution from their service center.
Still if you have any concern with warranty, you can change your front mudgard to stock and then claim.
if you drill the mudguard and fix extension then the warranty of mudguard will be voided but it will not void the warranty of whole bike . I got this info from showroom.
Thanks for sharing the information 👍🏻
Hello..How is that rear tyre hugger performing now??
I have installed the same one after watching your video..
I have been using it from more than 2 years and I am fully satisfied with the way it performs.
Where can I find the mud extender and will this fit my Suzuki intruder 150 brother?
Front mudguard extender is of Royal Enfield Interceptor model. I gave a try and it fitted on my bike. You can give a try.
But if you are talking about rear mudguard then it’s universal mudguard which can fit into any bike.
@@Vayu_Vlogs i will try that but where is it available in Mumbai? Tried many places but not available
Is that leg guard still in your bike??
Good bro very good effort very helpful
Thanks Bro. Do subscribe for more such content.
@@Vayu_Vlogs installed it in my rs. by watching ur video thank you... ❤❤❤❤love from kerala...
Great that my video helped.
Very helpful video 🙂 thank you.
🙂👍🏻
Bro is it possible to mount a saddle bag on rs ? Possible make a video on that ...
Yes, Honda provides saddle stay (Common for both Highness & RS) as an accessory which can be installed on both side for saddle bags.
But look wise it is simple and I am looking for different design with tail rack. Once I get good option, I will get it installed and will make video of it.
@@Vayu_Vlogs yaah thanks ...I feel that the saddle bags will hit the silencer in RS ... Will be waiting for u r video .. coz based on that Oly I have to decide to with RS or Hness 😀..
Superb and informative vlog
Thank you 🙂
I have installed this extender in my cb350rs, now it vibrating and hitting in engine guard during hard roads. What is the solution?
I have zana crash guard and it does not touch the guard at any situation.
Some ppl have replaced fibre front mudguard of RS with H’ness black metal mudguard. You can think of it in future but for now you can bear this minimum touch.
All problem solved 👍🏻
I was always thinking about gt650 front extender and you did this first👌🏼👍🏻
Great it helped you. Subscribe for more such videos.
Hey brother what's the average mileage u got from cb 350rs??
Currently I am getting 30-32 mileage
Bro after fitting the rear mudguard , is it splashes the mud to the pillion ?!
Now it doesn’t splash on pillions back ..but sometimes from rear tyre side it splashes till seat or pillion calf level only that too if it is raining heavy or if there is mud/slush and if bike is running at high speed.
@@Vayu_Vlogs one major drawback..
Bro i also installed but it is making contact with tire when vibrate
Front or rear?
@@Vayu_Vlogs front
It does contact only on speed breakers when we are speed but dt too minor. I don’t see any damage sign on my front guard till now. Just make sure you have bolted properly without any gap.
Very informative thanks👍
Thanks Bro 🤟
What Materials is that rubber tube or plastic?
Front and rear is plastic. Middle one below seat is rubber material.
Is the rear tyre hugger working ??
Yes, it’s working fine.
Bro will it have any problem with tire touching the guard or perfomance difference ?
No bro, I didn’t find any performance difference. But yes in speed breaker guard touches tire and you will hear some sound but that is very minor.
@@Vayu_Vlogs oh
Any option for saddle stay in this bike??
Yes available from Honda.
Hi buddy, Can you tell me how firm does the rear mudguard fits? As it’s only fits on central screw it will eventually fall down?
Have you experienced the same
It fits evenly without any movement. So far it hasn't loosened, but if you want you can put extra metal strip for support.
Bro does the front mudguard extender rub or hit on the tyre when you go in a pothole or bad roads ?
Nope..it is tightly fitted, so it doesn't rub on tyre. So far never faced any issue.
Bhai nuts bahot tight hai, khul nahi rahe, kaise nikala poora mudguard?
WD 40 use kr lo ya fir mechanic se khulwa lo
@@Vayu_Vlogs okay bhai
Fix mud splashing to seat?
With mudguard installation, mud is not splashing till seat.
Bhai ye tyre hugger kaisa kam kar raha hai isme bike chalte waqt koi khat pat ya alag sound ata hai kya? Aur kya ye tyre se takrata hai??
Mast chal raha hai bina koi issue. Kahi pe touch nahi hota na aawaj aata hai.
@@Vayu_Vlogspillion pe mud splash hota hai kya compared to classic 350 ??
Nice man, keep it up.
Thank you 😊
1 no. Bhai..
Thanks bhai 🙂
Bro, u removed the saree guard?;
Yes Bro
Nice.. creative 🔥❤️
Thanks 🙂
Bro, very nice video 👍🏼
Pls tell me was it necessary to remove the saree guard to install the rear tyre hugger?
No..not required..
Saree guard bolt is fitted at diff place while for hugger u need to loose wheel axle.
Thanks for the response. Ordered from amazon. Bas ab front mud flap ka jugaad ho jaye. 😅
How much the front extender of continental gt cost? The price showing in the link of description is 399 but i called royal enfield, they saying it cost only 91 rs for continental.
Yes continental mudflaf is around 90, but most of ppl are not getting at their nearest Royal Enfield service center. So I have shared carbon racing link who have made front Mudflap specially for Honda CB350.
bro - please share the part number for continental gt front mudguard extender
Did u remove saree guard.?in RS
Yes
2.4 lakh ka bike kharido or for usme hole banao...datswhy I m waiting for re hunter 350
Very informative brother..........
Information is too useful. I am also searching for the solution. Further can you please tell me how comfortably rear tyre hugger fits ? Do it cause any problem ? Hope it is not touching number plate tail in case suspension gets compressed by 2 inches while riding.
Hugger fits well and I haven’t experienced hugger touching tail plate.
I usually ride alone so I might haven’t face but since tail plate section is flexible, so with pillion also if it touch it won’t create much issue.
Man the tyre hugger is sturdy or is it vibrating
No, it is not vibrating.
Bhai I have used it but one side is touching tyre
You did it your own or from mechanic person?
Try to align or you can increase the space by putting nut into another hole.
Due to this mudguard extension,,,, the main mudguard broke
Ri8
Mine is intact. I have modified my mudguard with riser and made video of it which you can watch here >
ruclips.net/video/n5eHYfvGjkU/видео.html
Nice ideas.... 👍🏼👍🏼👍🏼
Thanks Bro 🙂
Its out of stock. Can you please suggest any other one please??
Checkout this link
bandidospitstop.com/products/universal-mudguard
Or you can search for Universal Tyre Hugger For Bikes on Amazon.com
Do subscribe to my channel for more content.
ye sare accesories lagane pe warrenty void hota h ka?
thank you
Nahi bhai..ye sab external accessories hai isliye warranty void nhi hogi.
Video achhi lagi toh like aur subscrb kar lena
Bro I'm in coimbatore.. I want front mudguard extension... here it's not available. Kindly share link for buying this bro...
Bro what is the cost of that back hanging mudgaurd
Link plz
Bro you can check video description for price and link.
Great helpful video.
Bro I love this bike but my brother is saying to buy highness instead of Rs because pillion is comfortable in highness so do you ride with any women as pillion and how was her experience.
No I never took any women as pillion so can’t share that experience. But yes RS pillion seat height is more as compared to highness. Installing back rest would give some comfort but not good as Highness.
Good stuff, thank you!
🙂👍🏻
Pillion rider ke liye hand rails ka koi jugaad ?
You can check zana top rack video on my channel. You will get idea.
Bhai, how much do u pay the front and rear mudguard
Check video description.
If you like my video, subscribe to get future video updates. 🙂
Good Information, but I need one help please put the links to buy these products that will be helpful, I need to buy all 3 products,. Good keep going 👍.
I got link only for read Mudguard.
Other 2 I bought it from local shop which you can also get it from your local.
Amazon link is in the description.
@@Vayu_Vlogs could you please tell me which shop, as I reside at kamotha.
Its in Mulund Near Santoshi Mata Mandir
Mera isse accha hai bhai😅❤❤❤
Sahi hai bhai 👍🏻
please put the link for the crash guard
You can get the link from description of zana crash guard installation video -
ruclips.net/video/5IFbJpBul9M/видео.html
Do support my channel by subscribing if you like the video 🙂👍🏻
The link for zana crash guard shows an error😅
They have updated their website. Check this link
www.zanamotorcycles.com/ssc/crash-guard-cb350-rs
Nice idea bro, seems to be like it will get the job done!!
Yes Bro 😊
Good bhai
Thanks bhai. Subscrb for support 👍🏻
Good work brother
Thanks Bro 🙂
Nice, any thoughts on installing backrest?
I didn't like the strip design tail rack and back rest which you see currently in youtube video. I like pipe design like Himalayan tail rack, so waiting for such product from zana.
@@Vayu_Vlogs same man
Bro cost of front mudguard extender
Bro you can check video description for price and link.
good job brother
Thank you brother 😀
Which is good? Highness or RS.
Both has same engine. I liked RS look more as compared to Higness as I didn't want chrome parts much on bike.
After market ccessories is more of Highness in market as compared to RS.
Average kitna deti hai city me or Highway pe
As of now I am getting 32 . First service k baad wapas check krunga.
Bhai kaisa hai sab fitments 2 saal baad?
Kuch toota ya problem kiya ?
Nahi bhai sab proper hai. No crack nothing.
Bro, ur back tyre hugger is up side down ... reverse it
@@rohanchavhan4640 yes it was reversed by SC during service.
Link for crash guard?
Check my detail video of zana crach guard on my channel.
Bro.. from where do we get that rear small mud flap?
I got it from local bike accessories shop. I asked for small mud flap of any auto and he gave me that piece.
Very good bro .... plzz batao sound to ni kr rha hai
Kaunsa sound?
Rear Or front mud guard sound nahi kar raha hai??
Both brother ...
Nhi...properly fit kiya hai...and gap hai tyre and mudguard me...toh koi sound nhi aa rha
@@Vayu_Vlogs thnks bro.. you did great job
Pls make an after video.
Very good 👍
Best. Thanks.
🙂 subscribe for more such content 👍🏻
Nice bro 👌
It will be suitable for Hness 350 ?
Universal mud guard !!!!! ????
Yes.. works on both RS and Higness
@@Vayu_Vlogs Thank u 🙏 Bro …
I ordered …👍
Dude, can u share the price of the parts u have installed?
Good DIY video!
Keep it up! Drive safe!
Check video description.
If you like my video, subscribe to get future video updates. 🙂
Good effort
Thanks 🙂
Useful great
Bro i need some help, can u help me???
What help bro?
@@Vayu_Vlogs I need that GT 650 mud guard. I am not getting it here in kolkata. Can u plz send me? I will pay you. It will be of great help.