Toyota Auris 2013-2015 Wireless CarPlay with OEM navigation
HTML-код
- Опубликовано: 9 сен 2024
- A quick demonstration of a special box that works with the OEM touchscreen of Toyota cars and presents wireless CarPlay functionality. I had a big challenge of fitting it together with my head unit, because of the OEM navigation. Space is very limited in the dash, but eventually I made it work. Also a bit of soldering required to get the OEM microphone working - I'm still testing it if quality is going to be OK or not.
Hi @4dMiNi5Yr4t0r,
Thanks for sharing the demonstration of the CarPlay functionality.
I'm about to install the same special box into my Auris 2014.
What kind of screwdriver did you need exactly to take out the head unit from the car?
I think 12 or maybe 14 mm socket…typical Toyota stuff (Toyota only uses 10, 12, 14 and 17 mm pretty much everywhere)
show us exactly how it's done.
ruclips.net/video/37HuwK5bZPo/видео.html
Does your rear camera still works after disconnecting the device? My camera worked just fine, after I connected this box never worked. Only if the box is coneccted, once I disconnect I have no camera signal,I checked all connections.
weird, I never had an issue, although I never disconnected the box, but as you could see in the video with the box connected it works OK
@@4dMiNi5Tr4t0r OM buttons sometimes doesn't works if it happens I need to restart the multimedia, so I decided no to use it. Dont you know how to reset the multimedia? I was searching for recovery file but culdn't find, this before I was able to update the framwork but I can't repeat it because it has the newest version.
@@user-us1pe5xk6i sadly no, but the whatsapp number of Kremersino/Limcet is usually quite helpful
Can this shipping to USA, Japan, and Spain too?
Hi, do you know some similar box which works with Toyota Auris 2018?
autoextra.ro/en/produs/carplay-and-android-auto-integration-for-toyota-touch2-2013-2018/
@@4dMiNi5Tr4t0r hi . Do you know if this is really plug and play? No cut wires is needed?
@@diogorosa5883 I haven’t tried the box for facelift Auris, mine is 2014 and the product I used is completely plug and play, all wires and connectors are included.
Please do you have it for Toyota touch2 2018 ?
There are different boxes for that, which connect to the navigation input I think. If you search on Aliexpress there are a lot of options, much cheaper than this.
Can you make a video on how to u installed this and tools u used for it
ruclips.net/video/37HuwK5bZPo/видео.html
Hey, I've got a question, can I send you a picture of my radio and can you say if I can install a Carplay on it
I am not the right guy for that, talk to car-solutions.com or Kremersino
Hi man!
Which software number do you have? Because i have the same device but another interface? Could you tell me your software number?
Sure:
Limcet-P306 V3.9.3.0811
Hey just wanted to ask if there are any news about this mod :')
Still working fine in my car with latest iOS
@@4dMiNi5Tr4t0r thanks for the reply! I wanted to ask what kind of module have you bought because I can find tons of modules but for the Toyota touch 2, not the one on the 2013 Auris my
@@alessandroianne8960 car-solutions have it still I think, but basically any module suiting e.g. Toyota Prado is OK, because it is the same module.
@@4dMiNi5Tr4t0r thanks! I just ordered one and it should arrive Friday! Fingers crossed, I'll let you know if it works!
Hi is there an installation video?
This is a good reference, although different Toyota: ruclips.net/video/37HuwK5bZPo/видео.html
Hey, I got the same stereo. Can you give a link to the one that you got from the website please? It will help a lot to get the right one.
It depends on the manufacturer of your stereo - Fujitsu-Ten or Panasonic
@@4dMiNi5Tr4t0r I have Panasonic
@@ilyasdawud4617 car-solutions.com/en/wireless-carplay-and-android-auto-adapter-for-toyota-with-touch-2-entune-2-panasonic/
How do you find out the manufacturer of your head unit? Thanks
Can you tell me the product name or where to buy that
car-solutions.com
where can i get this box?
I bought this one at car-solutions.com
Hey Pal - What about DAB? Is there antenna surface integrated? Thanks.
Hey, no DAB in this box
I’d like to do the same for my car, auris 2013… tools please ?
Hey, not many tools required. There is a video online on how to remove the head unit: basically you could pull the trim with your hands and help with a plastic, non-sharp tool, like an old credit card. Once the trim is pulled you will need a 10 or 14 mm socket, I can’t remember which to remove the 4 screws holding the head unit. Next once pulled you need to disassemble the head unit, which is very straight forward with a 10 mm socket. How to connect cables and all that is shown in the installation video of the box. Be aware: if you have factory satnav like I do then installing the box will make it so thick that you need to cut a fair bit of plastic reinforcement before being able to install back the HU. It is behind the HU so not going to ruin the look of the car, but it is some serious work. Also one could remove the factory satnav fully, since it is a separate box from the HU and apparently the HU functions without it just fine. If you decide to keep the factory satnav I also had to re-route its Bluetooth antenna - an easy job, but again time consuming.
@@4dMiNi5Tr4t0r still where is the carplay device? And is our stereos compatible with these carplay devices !?
@@bishoyhanna974 this is a box under the head unit, and it is connected via special cables to the original stereo. I put the link to the website in the other comments.
Could you please tell me what did you have to solder to get the OEM microphone to work? And does it work nicely or you have issues with it?
Hi, it was a complicated job. I first looked up the official pinout for the connector and spliced the +/- cables for the microphone (signal wires). Then connected to them a 3.5mm socket, to which I connected the CarPlay box. It worked, but sound was distorted. I added a volume slider between the box and my socket and started turning down the volume while testing it. Eventually found a sweetspot with proper sound levels, so I fixed the state of the volume slider with some super glue and job done.
@@4dMiNi5Tr4t0r thank you. You have pretty good ideas. I will consider doing that too
Hello,
Mit kellett ehhez beszerelni?
Üdv.
Szia
Ezt: Wireless CarPlay and Android Auto Adapter for Toyota with Touch 2 / Entune 2 (Panasonic)
Tudnál egy linket adni, hogy honnan rendelted?
@@erdeitibor4938 car-solutions.com
Lol it's cheaper just to replace head unit
True, but I wanted to do it this way :)