DIY Glider Remote Stick | Openvario | Part 1
HTML-код
- Опубликовано: 11 сен 2024
- Download and 3D print your own grip stick: www.thingiverse...
Homepage & Blog: stefly.aero/
Facebook: / stefly.aero
Openvario project: www.openvario.org
Music by: / ehrling
Produced by Stefan Langer
The stick is not certified for aviation purpose, we are not responsible for any accidents which are directly or indirectly caused by the grip stick. It is strongly recommended to use an aluminium insert for strength reasons and don´t controle the glider with the head of the remote stick!
Hey Stefan
Is there a part 2? I Can't find it and want to see how the speed switch is installed and connected
hi, great job, but have you a template for the skin ?
Awesome! Any way I can get the template for the leather?
Yes, this I'm searching for two.
@@glide2air me to
Yes, also looking for this as well.
Sau cool - mit dem Leder wirkt der ausgedruckte Stick plötzlich richtig edel!
Prima Anleitung, speziell mit dem Leder!!
Open Source ist schon richtig was feines! Danke fürs reinstellen!
Grüße!
Hi Stefan, great work yours!! Could you please supply also the 3D files (not STL but IGES or STEP or any other 3D extension). I would like to modify the model according to my needs.
I would also like to have a step file. I need to modify the Stick to 30mm for my Banjo UL-Glider
Uuauuuuuu fantastic brother, Strong Like to Brasil !
Klasse!! Bin auf die Fortsetzung gespannt. Ne liste mit allen verwendeten Teilen bei OpenVario wäre super. Ist die Software opensource? Das erinnert stark an xcsoar. Grüße
Vielen Dank! Eine Liste mit allen benötigten Teilen für den Knüppelgriff werde ich noch veröffentlichen. Die Software des Remote Sticks (Arduino) ist Opensource und auf dem Openvario läuft XCSoar. Weitere Infos zum Openvario findest du auf www.openvario.org . Beste Grüße, Stefan
Alright... now officially building this thing. What size buttons did you use stefan?
Hi and thanks for creating the stick and the video. I plan to print the stick on my 3d printer. A question for you, there are three versions of the stick, KnueppeIV31, Stick v1 and stick V32. What are the differences between them and which one should I use? Does the front plate fit all three versions?
Hi Stefan,
Do you have stl files for the grip, faceplate and rubber told you can share that match the current pub on the OpenVario project?
Hey Stefan,
hast du die Teileliste für den Knüppel irgendwo hinterlegt? Ich habe keine Infos für den 4 Tasten Knüppel gefunden. Die Schurtler Taster scheinen es ja nicht mehr zu sein.
This is great. Thank you for posting. Will you release the STL file & dxf for the stick & leather? Alternatively would you be willing to sell a bare stick, without electronics?
Hi John, I will upload the STL file, but don´t have an dxf for the leather. You can also get a bare stick from me. Cheers, Stefan
There it is: www.thingiverse.com/thing:1818509
Thank you very much for making it available. I'm going to have a go as it looks like fun, but I doubt it will look as professional as yours!
Give it a try!
SLSoaring thanks it prints very well. I guess I need to test fit it in my glider as it looks wide.
is the home on the back for a vario/stf switch?
Hi Stefan? That waxed Cord... 1mm? Or even smaller?
Hi Stefan, Do you perhaps have a cad file/STL available for the "front panel" ? the one in which the buttons will be? Thanks a lot! I looks great!
Hi Jean, have a look at my Thingiverse profile: www.thingiverse.com/thing:1595638
Cheers, Stefan
thanks a lot Stephan! what a legend!
What material did you use for the stick? Was it ABS?
Yes, I use ABS!
You MUST use ABS or another material not affected by heat like PLA. PLA is what people normally use for 3D printing because it is very easy to print. On an Aircraft I would NEVER use PLA.