No the Vtx , esc , expresslrs receiver, flight controller this all is in one board (AIO) I am using Neutronrc At32f435 mini 2s 12A AIO so if you want to add external vtx then you can but this board also have inbuilt vtx
Sorry bro but I don't have idea why it is not available right now and most of similar AIOs is also out of stock, i got this board from my friend, when he went china, I told him to purchase it from their
Hi, I have a question, I want to try a build similar to your and connect it to an Flysky fs-i6 and to an Eachine EV100 goggles, is it possible to do so with the flight controller that you use in this video or do I need a different one?
Yes! it is possible but the flight controller I am using is all about in one. Means it have inbuilt expresslrs receiver,4 esc , analog 400mw vtx. You just have to solder 4 motors and fpv camera and that's it. And if you want to use your own receiver then you can use it by soldering it on that flight controller for external receiver pad and it have analog vtx so it will easily connect with your Eachaine Ev100 goggles. But if you use the external receiver then it will be more heavier so I suggest you to purchase expresslrs radio controller like radiomaster Pocket Elrs version or radiomaster tx12, radiomaster tx16 or radiomaster boxer. And the flight controller I am using in this drone is neutron rc AT32 F435 , 5 in 1 AIO.
Hi, it’s me again 😅 I tried and built the drone exactly like yours, but now I have some problem to make it flight correctly, as soon as I arm the motors it starts going crazy and wobbles. Have you encountered the same problems or with you everything went smooth? Is there a way to fix this with betaflight? Thank you very much
@lucu1911 yes I have encountered the same problem when I made it for first time here is the solution : connect your drone to betaflight and go to motors tab and enable the options to run the motors while connected to betaflight and then take the master key at top position and plug in the battery and after Motor beeps complete then lower the master key and then run all the motor using master key and after doing this steps enable motors direction is reversed option and save and reboot and then try to fly drone this steps I followed to solve this problem and I wish it work with your drone also and if it doesn't works then message me on instagram id : burhan_k_marfatiya and I will definitely reply you!!
Sure, try it and if it works then comment here and if it doesn't work then message me on instagram id: burhan_k_marfatiya I will definitely help you 😉😊
I am using 2pcs of 1s happymodel 300mah by combining it togather and make 2s lipo battery so it gives around 3minutes of flight time but if you use betafpv 2s 450mah than you get more flight around 4 to 5minutes
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
External vtx not required for camera?
No the Vtx , esc , expresslrs receiver, flight controller this all is in one board (AIO) I am using Neutronrc At32f435 mini 2s 12A AIO so if you want to add external vtx then you can but this board also have inbuilt vtx
@@aerofuture53 Do you know of any such similar boards,because this one isn’t available atm..
Sorry bro but I don't have idea why it is not available right now and most of similar AIOs is also out of stock, i got this board from my friend, when he went china, I told him to purchase it from their
@@aerofuture53 Thank you for the effort,may we all have good Aio’s in the future!!!
Welcome! 😊 And sure we have new AIOs in future and if any AIO will become available I will sure tell you.
Hi, I have a question, I want to try a build similar to your and connect it to an Flysky fs-i6 and to an Eachine EV100 goggles, is it possible to do so with the flight controller that you use in this video or do I need a different one?
Yes! it is possible but the flight controller I am using is all about in one. Means it have inbuilt expresslrs receiver,4 esc , analog 400mw vtx. You just have to solder 4 motors and fpv camera and that's it. And if you want to use your own receiver then you can use it by soldering it on that flight controller for external receiver pad and it have analog vtx so it will easily connect with your Eachaine Ev100 goggles. But if you use the external receiver then it will be more heavier so I suggest you to purchase expresslrs radio controller like radiomaster Pocket Elrs version or radiomaster tx12, radiomaster tx16 or radiomaster boxer. And the flight controller I am using in this drone is neutron rc AT32 F435 , 5 in 1 AIO.
Hi, it’s me again 😅 I tried and built the drone exactly like yours, but now I have some problem to make it flight correctly, as soon as I arm the motors it starts going crazy and wobbles. Have you encountered the same problems or with you everything went smooth? Is there a way to fix this with betaflight? Thank you very much
@lucu1911 yes I have encountered the same problem when I made it for first time here is the solution
: connect your drone to betaflight and go to motors tab and enable the options to run the motors while connected to betaflight and then take the master key at top position and plug in the battery and after Motor beeps complete then lower the master key and then run all the motor using master key and after doing this steps enable motors direction is reversed option and save and reboot and then try to fly drone this steps I followed to solve this problem and I wish it work with your drone also and if it doesn't works then message me on instagram id : burhan_k_marfatiya and I will definitely reply you!!
@@aerofuture53 thank you very much, it was the only thing that I didn’t do, I will try and see if this will fix my problem
Sure, try it and if it works then comment here and if it doesn't work then message me on instagram id: burhan_k_marfatiya I will definitely help you 😉😊
Bhai very nice 👍
Thankyou bhai! 😁☺️☺️
What is a motor? Pls
3aeolus 10000kv and 1hglrc 10000kv brushless motor
@@aerofuture53 thanks 😍😍😍😍😍
Welcome! 😊
Flight Times??
I am using 2pcs of 1s happymodel 300mah by combining it togather and make 2s lipo battery so it gives around 3minutes of flight time but if you use betafpv 2s 450mah than you get more flight around 4 to 5minutes
Supper
😊❤❤