Really impressive,,,I just bought that model 30min ago and after watching your video I can’t wait to use it tomorrow,,,really powerful wrench,,,thanks for the video,nice job 💪🏼💪🏼
Yep this wrench got some power! I got a worx wx 290 v20 impact wrench. Just a few hours ago I was amazed by how easy it was to screw a bolt to 1.5 millimeter stainless steel sheet. I used it as a drill... Amazing.. It worked:)) now way:))) yep i used a special drilling bolts for the stainless steel. The impact effect do a some magic by making a micro vibrtions to the bolts. I really happy with my purchase:)
Note that u loose torque with every extra connection on the tip, like extentions or Adapters! And the breaking lose torque is always higher than the tightening torque!
Good review. You helped me make my decision to buy it. One question though, how do you use it if you wanna tighten something at like 130nm torque. You choose 2nd power setting and press the trigger just half way or something? Thanks!
If you wanna do somewhat relible and precise tests, it's important that you loosen and retorque up the bolt after a failed attempt. Even if it failed undoing the bolt/nut, it's unlikely it didn't move it a tiny bit. Meaning the next attempt actually takes less torque to loosen than if you did it in "one go". But thanks for the video. I've been considering one of these cheapo chinese impacts for the smaller, lighter torque jobs. The supermega high torque Milwaukee is amazing, zipping off crank bolts like they were M5s. But it's really fatiguing to use all the time, because it's so heavy.
Worx website and eBay store does not have any reference to this product. Some sellers in the UK offer it but that's it. Worx does offer the impact driver, but not impact wrench.
I love the switch driver... black and Decker had one but it was detachable. It was good too but idk if they ever upgraded to lithium... So i grabbed the worx... Definitely great because of how many tools you can use with battery
Hi , I have been looking at this tool , was wondering how you have got on with it since you did the video , I wasn't sure if it would be suitable for more stubborn bolts with a bit of rust on them , thinking of using it for some work on my old defender .. any info would be much appreciated ..
I bought it, but it doesn't get the job done. Not even with a large battery. 6.0 amp. I cannot remove the bolts from my (car)wheels. I love the Worx tools, but I'm very very disappointed in this one. Costed me alot, but does not deliver as it promises. On Aliexpress they sell impact wrenches with 1200 nm torque for €80 , with a hard case, two large batteries and a charger. I can buy this, but I really wanna stick with Worx, because I already have three tools from them. Too bad for this one, though👎👎👎
... the breaking point is not that important because almost any impact wrench can do it. How much is tides is the question. So how much is the tiding point?
007tlawed cheers, is it still going strong? Looks to be a good bit of kit, especially considering you were using an extension as that often reduces effectiveness of impacts
You should never use a socket extension with an impact driver as it cuts the torque in half. I bet I you remove the extension, it will loosen it no problem.
Using an extension is the best way to reduce impact torque. The wheel nuts of that Focus shouldn't be torqued past a 130 Nm. This "Test" only proves that the guy's got no idea of anything
Excellent video sir. Ordering one now. Sick of the noisy compressor and dragging the air line. Very grateful to you.
bruce8558 thank you
Really impressive,,,I just bought that model 30min ago and after watching your video I can’t wait to use it tomorrow,,,really powerful wrench,,,thanks for the video,nice job 💪🏼💪🏼
"Ooooh! Setting Twooo" LOL!! Loved it!
Great video! Exactly the info I was looking for.
Thankyou buddy!!
Yep this wrench got some power!
I got a worx wx 290 v20 impact wrench. Just a few hours ago I was amazed by how easy it was to screw a bolt to 1.5 millimeter stainless steel sheet. I used it as a drill... Amazing.. It worked:)) now way:))) yep i used a special drilling bolts for the stainless steel.
The impact effect do a some magic by making a micro vibrtions to the bolts. I really happy with my purchase:)
Note that u loose torque with every extra connection on the tip, like extentions or Adapters! And the breaking lose torque is always higher than the tightening torque!
I've had one of these for many years cheap well made tool even better using the 4ah battery. 👍
Dude your going to bust the lug studs off we get it it works
Steve top tip you should push down on the bar cos pulling up wil wreck the disc's in your back!!!
Good review. You helped me make my decision to buy it. One question though, how do you use it if you wanna tighten something at like 130nm torque. You choose 2nd power setting and press the trigger just half way or something? Thanks!
Actually by him using the extension it cut its power in half so it's more than capable.
Just bought 1 due to your video....thx i saved $60 not buying the dewalt
Хороший обзор👍
If you wanna do somewhat relible and precise tests, it's important that you loosen and retorque up the bolt after a failed attempt. Even if it failed undoing the bolt/nut, it's unlikely it didn't move it a tiny bit. Meaning the next attempt actually takes less torque to loosen than if you did it in "one go".
But thanks for the video. I've been considering one of these cheapo chinese impacts for the smaller, lighter torque jobs. The supermega high torque Milwaukee is amazing, zipping off crank bolts like they were M5s. But it's really fatiguing to use all the time, because it's so heavy.
Worx website and eBay store does not have any reference to this product.
Some sellers in the UK offer it but that's it.
Worx does offer the impact driver, but not impact wrench.
I found it on their site no problem
Please take a look at our test on WU388 and WU189. Its amazingly robust!
It seems WORX tools coming strong, I really like their clever design ideas like Axis 2in1 and Swichdrivers
Use worx axis for work day in day out. Great tools for someone starting out in trade work but can't suffer makita/dewalt prices.
I love the switch driver... black and Decker had one but it was detachable. It was good too but idk if they ever upgraded to lithium... So i grabbed the worx... Definitely great because of how many tools you can use with battery
Hi , I have been looking at this tool , was wondering how you have got on with it since you did the video , I wasn't sure if it would be suitable for more stubborn bolts with a bit of rust on them , thinking of using it for some work on my old defender .. any info would be much appreciated ..
Good video 👍 for impact wrenches you’re better off with short sockets and no extension bar
Where can i buy your hand gloves, looks very stable
I am seriously considering getting one of these or the Ryobi equivalent. Do you still use it and does it perform now? Cheers
Я бы тоже хотел узнать ответ на этот вопрос. Спасибо.
ive got the worx 20v brushless combi drill and the clutch went after very very little use
He should just STOP! Okay, I want one, Im sold
Lol that was actually really funny. I thought it was the torque stick hahah.
Neat video, thank you !
What size sockets are needed with this driver?
Is your visitor from the sheltered workshop, I bet he's an Arsenal supporter?
I bought it, but it doesn't get the job done. Not even with a large battery. 6.0 amp. I cannot remove the bolts from my (car)wheels.
I love the Worx tools, but I'm very very disappointed in this one.
Costed me alot, but does not deliver as it promises.
On Aliexpress they sell impact wrenches with 1200 nm torque for €80 , with a hard case, two large batteries and a charger.
I can buy this, but I really wanna stick with Worx, because I already have three tools from them.
Too bad for this one, though👎👎👎
... the breaking point is not that important because almost any impact wrench can do it.
How much is tides is the question. So how much is the tiding point?
Wat size retaining pin does the gun take as i bought one for scaffolding and every 21mm socket ive bought has a bigger pin than the gun?
I don't know what you mean by the pin?
@@Sparkplugsteve the pin which holds the socket to the gun
@@nick54021 3/4 inch off memory..all my sockets fit ok.
1/2 inch
Does it still work?
Yes still going strong
Thanks
Thank you for sacrafing your alloy wheel, I would have done it on something else, oh it's the wife's car 🤭
What's in the cannisters at the back? Sheep dip? 😅
Can I ask where you got this and how much?
offbeatwarble amazon. Was £180 with 2 batteries.
007tlawed cheers, is it still going strong? Looks to be a good bit of kit, especially considering you were using an extension as that often reduces effectiveness of impacts
I never knew it reduced its power so that makes it better. yeh its great still. great value for the money
You should never use a socket extension with an impact driver as it cuts the torque in half. I bet I you remove the extension, it will loosen it no problem.
Да это правда. Я использую пневмо гайковерт, с удлинителем он слабее.
Using an extension is the best way to reduce impact torque. The wheel nuts of that Focus shouldn't be torqued past a 130 Nm. This "Test" only proves that the guy's got no idea of anything
untubus thats forsure
I was expected to break the bolt any minute.... 😂
Das Video zeigt nur wie man es auf keinen Fall machen sollte.
Ditch the extension to get better torque from the gun.
his wheel lugs are going to snap lol
I have the same ! This tool absolutely dont work ! Not good for the wheels !!! You need a big Dewalt or milwaukee
That wrench is the exact replica of Rockwell RK2855K2 impact wrench, wonder where they are made
Think batterys are same.. Wonnder if they would work
Oil_Burner i
Yes it would. basically the same tool just different colours. All made by positec group.
Worx is a China tool company, and Worx company had bought the brand Rockwell for many years. So, the Worx company own the two brand Worx and Rockwell.
Worx Nitro, Kress Elektrowerkzeuge, Worx, Rockwell - all those brands belong to Positec Co.
210 nm is 154.77 ft-lb. Never torque your lugs beyond Manufacturer rating. Very dangerous!
Гон!!колёса он не может откручивать
Only Makita 👍
Говори по русски
Entweder bist du besoffen oder ist das ein manipulierte Video Worx schafft kaum 150nm