Hi John. Great video again. Just love your living room lathe. Beautiful cabinet you made for it. Great haul with all those tools. You are so amazing. Take care. 👍👍❤.
You grabbed some very nice items, Scout. The brass hammer looks wonderful with the contrasting polished shaft and black handle. The sign turned out nicely. Amazing what a little Comet can do. 🙂👍
Thanks again John for all the knowledge, tips, and great stories!!! As a small token of appreciation, I have a few more really cool items for you that i think you will enjoy. I'll bring them to Zagarys in July, or I can send them to you. My son and I are now spending many hours in the shop thanks to your inspiration. ❤️🇺🇸
Every tool you showed was cool, But I liked the Millers falls Red set the best. You also made me laugh at , "I will take the hammer upstairs and use it for the lathe in my living room" Now thats COOL lol
The Comet made me think of all the hours i spent cleaning wide whitewalls with Ajax. I dreaded when my old man would take a car I had just got done detailing; what did he care? HE never had to clean those whitewalls.
I do woodworking and since I’ve came across your channel you’ve inspired me to start looking for old tools to try and restore to decorate my shop with! Thanks a million
I love the brass hammer. Looks better than new. The sign is transformed. Wow. The chisel may have someones name on it, with surname PAINE. The Stanley chisel looks terrific. Nice haul from Zagray. I had not seen the Channel Lock version of vise grips. Very interesting. Dave.
Too bad I’m in the Midwest, ScoutCrafter. It would be a blast spending a weekend going to one of those shows with you. You’re giving me the fever to get out there and buy some old tools this summer! You are an inspiration, Sir.
This was a great Mosh and the restorations look beautiful. Are going to restore the 2 cylinder hand pump? That would look good with a new coat of black paint on it. Thanks for sharing this.
Like the quarter table finds, right up my alley, great stuff. Two items I never knew existed were the double barrel are pump and the channel lock grips, nice finds. I always look for and treasure miller falls tools, getting pretty hard to find in my area, thanks for the video, appreciated and enjoyed watching.
As always you've out done yourself with another great episode! The chisels are awesome and those chisels from Miller's Falls are gorgeous. Thanks again and see you on Wednesday
Another great video, ScoutCrafter! 👍🏻 The restorations all turned out well. I’m a sucker for small hammers (machinist hammers, gunsmithing hammers, etc.) so the brass hammer was my favorite of the bunch.
DAWN Platinum Powerwash dish spray Is my go to for stuff like that Farmers plate. Great first stop before getting out something that may take paint off. The grease cutting power is nothing to sneeze at. I use it to clean my stove top. Really great for cleaning off years of caked on grim.
Yes the wrench is for installing fire sprinkler heads. According to Fire Code you are only suppose to install heads with the manufacturer designed wrench. Never an adjustable wrench. Thanks for the Mosh
You picked up some interesting tools. It's been decades since x acto made their tools available in the nice fitted wooden boxes. I still have mine. I never knew Channelock made a version of vice grips. Always learning something new here. It looks like one of the blue vinyl end pieces on one of the Channelocks is on upside down. I will speculate that the letters on the masonry chisel is the name of a previous owner.
You scored a lot of nice tools in this haul. Some of the Popular Mechanics tools were sold at K-Mart. I have a Popular Mechanics 1/4" drive ratchet and socket set that I bought there. It's been my go-to 1/4" drive set for 20+ years. It's withstood a LOT of use (and occasional abuse) and still feels almost as good as my SK and Snap-On 1/4" ratchets.
That's a great haul of tools for very little outlay John, unbelievable value there. The brace is a beauty, but the bars and bolsters are great - very low $ per pound of steel ! I'm amazed by that sign, I actually thought it was Yellow background not cream/off-white ! I'd love to see what you can do with those MF chisels and screwdriver, I'm sure you could make those handles glow red !
Great job John!!! The old tools were really made better back when people took pride in their work!!! Thanks for making the tools proud again!!! The Old Army Scout…
There was a time some years ago when I pumped up a Farmall "A" tractor tire with foot pump. The compression cylinder was about 6-8 inches long. There was just enough air in the tire when I started to maintain the airtight bead.
I was just at Lehman's in Kidron Ohio his weekend and they had brand new brace drills on the shelf for $139.99!!! Seriously! And they handles were plastic!!!!
I see why newer screwdrivers have the flat in line with the corner. It’s thicker corner to corner, makes for less chance of bending it. And because it’s a higher chance of damaging the project, theres a lower chance of using it as a pry bar.
Keep getting sidetracked, only took me an hour to finish a 15 minute video, had to stop and make a pot of popcorn for a half grown squirrel that's been hanging around and chewing on chicken bones all day........I really like those Millers Falls Chisels!
11:11 The Grip Locks appear to have a difference in them. Notice the blue piece on the ends. Your restored tool has the piece dip down towards the other handle. The unrestored tool has the blue piece dip up.
Not than I'm a member of the "Patina Police" but the wooden cladding on the Stanley ratcheting brace is most likely stained or weathered Beech rather than Walnut. They switched from Rosewood to Beech after Rosewood became more expensive to get. If you want to try something interesting, Lee Valley used to sell an adapter that could work with that chuck and featured a 3/8" socket driver. You'd be surprised at the amount of torque you get from these braces!
Is there a reason, especially on some of the steel tools that would rust, not to spray them with some sort of shellac or clear coat? I know you wouldn't want to get any of that into the grooves on the end of a screwdriver, and you wouldn't want any of that inside the inner workings of a set of vice grips, but on something like the shaft of that brass hammer a clear acrylic might protect it from rust and keep it shining
Absolutely- My home is climate controlled and low humidity so rust isn’t an issue but if these were going in the garage they would have to have a protective clear coat of something. 😃👍
Hello again Scout, I have a question for you. How big is your house ? I mean how can you store so many tools in that place, because if you don't resell them except the ones you give to friends. And the occasional give away's to subscribers, you must have 1000+ tools. I'm watching you for five years, so in this time you have restored tons of item's. You have a magical storage attic or something ? 🤷🏻♂️🤔
@@ScoutCrafter Yes I guess that's good for this hobby/passion, because if you had a wife and not a girlfriend you surtanly would sleep in the back yard. 😉😆
As much as I really enjoytcall your restorations, you SHOULD HAVE left the Armed Forces sign as it. I truly think it looked much better as found. Just this man's opinion of course.
What search terms does one use in google to find these kinds of tool meetups you go to, except i’m looking for in Minnesota? Or is there some directory?
Awesome stuff!! I hope to make it to that show one day!! Long trip from Oklahoma! I wonder if that metal craft hammer was a screwdriver someone made into a brass hammer handle. I think it may be!
Your brick chisel was made by the B. O. Paine Co. of Millbury, MA.
Thanks Rick!!!
Hi John. Great video again. Just love your living room lathe. Beautiful cabinet you made for it. Great haul with all those tools. You are so amazing. Take care. 👍👍❤.
@@ScoutCrafter Glad to be of help.
You grabbed some very nice items, Scout. The brass hammer looks wonderful with the contrasting polished shaft and black handle. The sign turned out nicely. Amazing what a little Comet can do. 🙂👍
I'm always amazed at how cheap the prices are. Beautiful restorations. Thank you.
Thanks again John for all the knowledge, tips, and great stories!!! As a small token of appreciation, I have a few more really cool items for you that i think you will enjoy. I'll bring them to Zagarys in July, or I can send them to you. My son and I are now spending many hours in the shop thanks to your inspiration. ❤️🇺🇸
Hi Scott- I hope to see you at Zagray in July! One thing it gets HOT! 😂😂😂😂
Never saw a two cylinder hand pump. Very interesting and only a dollar! Some really nice stuff and thanks for showing us.
Nice restorations, love to see the vise grip pliers redone
Every tool you showed was cool, But I liked the Millers falls Red set the best. You also made me laugh at , "I will take the hammer upstairs and use it for the lathe in my living room" Now thats COOL lol
Dardrum This is the lathe I was talking about! ruclips.net/video/_BtYctonMTQ/видео.htmlsi=I00ltNNwBCLJmOuZ
@@ScoutCrafter Yes, I remember that video now, great mini lathe, glad we got to revisit the vid.
I enjoy cleaning up old sign.. ca.e out nice!
Love those chisel handles! Thank you for sharing, especially for those of us not able to attend the show!
The Comet made me think of all the hours i spent cleaning wide whitewalls with Ajax. I dreaded when my old man would take a car I had just got done detailing; what did he care? HE never had to clean those whitewalls.
Awesome restorations!
All your restorations came out great. The double tube air pump would be a fun one to clean up.
I do woodworking and since I’ve came across your channel you’ve inspired me to start looking for old tools to try and restore to decorate my shop with! Thanks a million
This hobby is so rewarding and enjoyable. I’m so glad you have joined in on the fun! 😃👍
Very cool!
Nice tool haul!! That little hammer came out amazing!!
The sign turned out great. Looking forward to the Estwing Hammer restoration.
The little brass hammer looks great now 🔨👍😊
I love the brass hammer. Looks better than new. The sign is transformed. Wow.
The chisel may have someones name on it, with surname PAINE.
The Stanley chisel looks terrific.
Nice haul from Zagray. I had not seen the Channel Lock version of vise grips. Very interesting.
Dave.
Dave- Complicated design but very interesting!
I can only imagine what I could do with $5 at the show 🧐 Nice haul and look forward to the restorations.
The sign turned out beautiful
Cool Stuff that you showed today , Thanks for sharing .👏
Great stuff! That sign looks so different after cleaning. That air pump has to be a next restoration.
Too bad I’m in the Midwest, ScoutCrafter. It would be a blast spending a weekend going to one of those shows with you. You’re giving me the fever to get out there and buy some old tools this summer! You are an inspiration, Sir.
Great stuff, as always. Ned's son looks like he could play for the Jets!
😂😂😂 Ray! I thought the same thing! 😃👍
One dollar for that sweet old pump! What!?! Man your celebrity is really paying off! 👍😂👍😎😉
Good haul and the chisel came out great
The sign was a surprise, I thought it was yellow.
Me too!
This was a great Mosh and the restorations look beautiful. Are going to restore the 2 cylinder hand pump? That would look good with a new coat of black paint on it. Thanks for sharing this.
John- I was looking to see how the tube comes off the base, the single pumps screw off but this one looks different. 🤔😃👍
Well done restorations and thanks for taking me along on Zagrays
Little red on the facets of that chisel would kill, l actually thought the license plate was a kinda of “traffic light” yellow/gold color… woof
Good pickups and video. Hope to get to the show and meet you one day.👍🏻
Joe- Jacktown Saturday! 😃👍
Stanley and Millers Falls , my 2 favorites. Beautiful tools.
Like the quarter table finds, right up my alley, great stuff. Two items I never knew existed were the double barrel are pump and the channel lock grips, nice finds. I always look for and treasure miller falls tools, getting pretty hard to find in my area, thanks for the video, appreciated and enjoyed watching.
dawn dish soap cleans great yet is gentle
wow i thought that license plate was actually yellow. Never expected it would be white.
Like the mosh today , I enjoy when you do restorations. Good job ! 😊
It was a fantastic mosh👍👍🔩🔩
As always you've out done yourself with another great episode! The chisels are awesome and those chisels from Miller's Falls are gorgeous. Thanks again and see you on Wednesday
John, you are the Davinci of tool restoration!
Another great video, ScoutCrafter! 👍🏻 The restorations all turned out well. I’m a sucker for small hammers (machinist hammers, gunsmithing hammers, etc.) so the brass hammer was my favorite of the bunch.
Great job my friend. Have used many of your techniques with restoration of a gunsmith project. Thank you for inspiration. Stay safe
Great video Jon really enjoyed that the chisel is fantastic. Never seen anything like it great restoration on the hammer as well, buddy.
DAWN Platinum Powerwash dish spray Is my go to for stuff like that Farmers plate. Great first stop before getting out something that may take paint off.
The grease cutting power is nothing to sneeze at. I use it to clean my stove top. Really great for cleaning off years of caked on grim.
The sign came out great.
Yes the wrench is for installing fire sprinkler heads. According to Fire Code you are only suppose to install heads with the manufacturer designed wrench. Never an adjustable wrench.
Thanks for the Mosh
You brought home some cool stuff!
Hello Join, what a great restoration 🛠️ like always 👍🤣
You picked up some interesting tools. It's been decades since x acto made their tools available in the nice fitted wooden boxes. I still have mine. I never knew Channelock made a version of vice grips. Always learning something new here. It looks like one of the blue vinyl end pieces on one of the Channelocks is on upside down. I will speculate that the letters on the masonry chisel is the name of a previous owner.
B.O.Paine out of Millsbury Mass. they made tools! 😃👍
You scored a lot of nice tools in this haul. Some of the Popular Mechanics tools were sold at K-Mart. I have a Popular Mechanics 1/4" drive ratchet and socket set that I bought there. It's been my go-to 1/4" drive set for 20+ years. It's withstood a LOT of use (and occasional abuse) and still feels almost as good as my SK and Snap-On 1/4" ratchets.
That's a great haul of tools for very little outlay John, unbelievable value there. The brace is a beauty, but the bars and bolsters are great - very low $ per pound of steel !
I'm amazed by that sign, I actually thought it was Yellow background not cream/off-white !
I'd love to see what you can do with those MF chisels and screwdriver, I'm sure you could make those handles glow red !
Yup, another great Mosh-up show. that brass hammer turned out great.
That quartzoid wrench is for installing fire sprinkler heads I used it many times
Such great stuff! I love those chisels.
Another "Great" show, thxs for sharing...
What kind of maniac does not collect pry bars. Lathe in your living room! Great video. Thank you.
ruclips.net/video/_BtYctonMTQ/видео.htmlsi=I00ltNNwBCLJmOuZ
Great job John!!! The old tools were really made better back when people took pride in their work!!! Thanks for making the tools proud again!!! The Old Army Scout…
There was a time some years ago when I pumped up a Farmall "A" tractor tire with foot pump. The compression cylinder was about 6-8 inches long. There was just enough air in the tire when I started to maintain the airtight bead.
Great job on the stanley cold chisel 👍👍👍
Love those Stanley® broad chisels!
That was action packed video.
Wow, some terrific finds. I say finds because I know you don’t buy tools anymore.😂
That screwdriver handle style is called a, trilobe.
Loads of good stuff, both in your tool haul and show content. Thanks for sharing
I was just at Lehman's in Kidron Ohio his weekend and they had brand new brace drills on the shelf for $139.99!!! Seriously! And they handles were plastic!!!!
I saw the new brace drills they seem flimsy compared to the originals. Great store!
Thanks Scout 🇺🇸
Well you've been busy! I don't know how you get it all done!
I see why newer screwdrivers have the flat in line with the corner. It’s thicker corner to corner, makes for less chance of bending it. And because it’s a higher chance of damaging the project, theres a lower chance of using it as a pry bar.
Screwdrivers are not pry bars. What's wrong with these savages?
Keep getting sidetracked, only took me an hour to finish a 15 minute video, had to stop and make a pot of popcorn for a half grown squirrel that's been hanging around and chewing on chicken bones all day........I really like those Millers Falls Chisels!
My first video ever on RUclips “Happy Squirrel”. 😂😂😂
11:11 The Grip Locks appear to have a difference in them. Notice the blue piece on the ends. Your restored tool has the piece dip down towards the other handle. The unrestored tool has the blue piece dip up.
Very good observation! I didn’t even notice that! 😃👍
B.O. Paine
Another great tool haul show and tell but a screwdriver shouldn't be used as a pry bar 😊
Not than I'm a member of the "Patina Police" but the wooden cladding on the Stanley ratcheting brace is most likely stained or weathered Beech rather than Walnut. They switched from Rosewood to Beech after Rosewood became more expensive to get. If you want to try something interesting, Lee Valley used to sell an adapter that could work with that chuck and featured a 3/8" socket driver. You'd be surprised at the amount of torque you get from these braces!
I have a bunch of braces buried somewhere and never really enjoyed using them for wood work but you’re so right about the torque you can get. 😃👍
I honestly thought the front of that veterans plate was a light orange or dark yellow color! Jeez! Looked like nicotine stains.
Imagine their lungs! 🫣😂👍
Gotcha
Is there a reason, especially on some of the steel tools that would rust, not to spray them with some sort of shellac or clear coat? I know you wouldn't want to get any of that into the grooves on the end of a screwdriver, and you wouldn't want any of that inside the inner workings of a set of vice grips, but on something like the shaft of that brass hammer a clear acrylic might protect it from rust and keep it shining
Absolutely- My home is climate controlled and low humidity so rust isn’t an issue but if these were going in the garage they would have to have a protective clear coat of something. 😃👍
Do you ever get up to the big Eliot show in southern Maine? That's coming up in July.
For me that’s a huge haul- it would have to be an overnighter. 😃👍
All of that at the $0.25 table? I'd love to see what you skipped over at the $0.50 table! Jim
Did a serviceman use that sign for target practice before you acquired it?
Hello again Scout, I have a question for you. How big is your house ? I mean how can you store so many tools in that place, because if you don't resell them except the ones you give to friends. And the occasional give away's to subscribers, you must have 1000+ tools.
I'm watching you for five years, so in this time you have restored tons of item's. You have a magical storage attic or something ? 🤷🏻♂️🤔
Luckily I have a two family house! My tenants are cats! 😂👍
@@ScoutCrafter Yes I guess that's good for this hobby/passion, because if you had a wife and not a girlfriend you surtanly would sleep in the back yard. 😉😆
Another good video...btw how far off is the sled project...i got one in the garage waiting to shadow you when you start...🖖
Really soon! It’s in my living room! 😂😂😂
Awesome finds John, how do you maintain the brass that shiny?
As much as I really enjoytcall your restorations, you SHOULD HAVE left the Armed Forces sign as it. I truly think it looked much better as found. Just this man's opinion of course.
Nicotine stains on anything skives me out. 🫣😂
What search terms does one use in google to find these kinds of tool meetups you go to, except i’m looking for in Minnesota? Or is there some directory?
Search google for tractor show near me, or Antique machinery show near me…
James from Wood by Wright has a pretty good list on his homepage.
So what types of shows are those? I’d love to find some around Michigan.
Usually antique tractor or steam engine shows. 😃👍
Wait a minute. You've got a lathe in your living room? 😂 I can tell that you don't have a live-in woman in your life. Way to go. 😊
Check it out! ruclips.net/video/_BtYctonMTQ/видео.htmlsi=mj21NbjPdBmqV4cP
I know you just done one on a screw driver, have you done one on punch's making your own.Eck usmc
Some really nice stuff John great job on the chisel very interesting shape
God bless take care 🇳🇿🇺🇸🦅🇮🇱🗽🪖47/FJB🤬
Most of the dirt on the plate was nicotine I'll bet. A little dip in TSP in water would whiten it instantly. Great video as usual!
If that plate was hanging in a VFW or American Legion then it probably was thirty years of nicotine! 😂👍
Wow that was such a great haul of stuff and really love that chisel wow 🤩
Awesome stuff!! I hope to make it to that show one day!! Long trip from Oklahoma! I wonder if that metal craft hammer was a screwdriver someone made into a brass hammer handle. I think it may be!
Some serious deals at Zagrays. So many nice tools for a quarter.
John, seeing the crowbars you got at Zagray reminds me of this: Before crowbars were invented, crows had to drink at home! 😅
Those tools had a nice turn around.
BOOM 😂😂😂😂😂
Lathe in the living room? Great idea!! I'll be doing the same after checking with my wife.
Frank- this is it! ruclips.net/video/_BtYctonMTQ/видео.htmlsi=mj21NbjPdBmqV4cP