Yeah. Using the dishwasher to clean (or sometimes even repair) stuff is one of the best tricks available. Used my dishwasher (that I got for free, because it was broken after an repair attempt) to clean a Delonghi automatic espresso machine, a Bosch dryer, Miele and Bosch washing machines, and several other dishwashers. Usually looks really good afterwards... - Dish washers rule!
Danke sehr! Ich weiß nicht genau wieviel Stunden Arbeit es waren, aber ich vermute dass es irgendwie zwischen 30 und 40 Stunden sind. Schon eine Menge, aber dafür habe ich jetzt eine sehr tolle Maschine! ;)
Ah, never mind. I think I figured it out. They 'hold' the post that is inserted from the rear of the machine that hold the drum from moving during shipping. They aren't needed after installation. I should never have questioned Miele's German build quality! Better than a BMW!
I have a Miele W 149 top loader. Just replaced the bearings for the first time. A lot of work but my DIY rating is a little bit higher now :) I think it was bought new in 2002 so lasted for many years. Looks like the motor outlasts the drum.
Hello, I don't know if you will respond to this but I'm doing a bearing change on a miele W 4144 and the only thing I can't find is someone actually put the spider back on the drum shaft, I was just wondering if there was a special technique for doing it please? Any info would be greatly appreciated thank you 😊👍😊
Great job! But You did´nt change the ring (laufring) on the axis, right? I mean the counterpart of the radial shaft seal (time: 4:04). This ring is mostly worn out and will damage the new seal within a short time. In the original repair kit of Miele there is one included. It´s not easy to get the ring off, mostly You have to crush em - and try to keep the axle undamaged.
Hi - 2 questions - 1. what did you use to clean the stainless steel drum? Any special product? 2. at 4:32, just to the left of the yellow bucket you will see a bracket (I think it is made of hard brown plastic). What is this part for? I found at piece loose in the cabinet. Thanks, love you (strange) videos.
hi what happen to your w432? sorry i keep asking lol its just you said it broke, :) i bet you get fed up with the same questions lol sorry :) great video :) also does the w720 still work?
Also das Waschmittelfach war bei dieser Maschine schon so sauber. Wenn ich aber eine Maschine mit schmutzigem Waschmittelfach bekomme, dann kommt das erstmal innen Spüler. Danach weiche ich das über Nacht ein in Salzsäure. Dann ist fast alles wieder sauber.
Yeah. Using the dishwasher to clean (or sometimes even repair) stuff is one of the best tricks available. Used my dishwasher (that I got for free, because it was broken after an repair attempt) to clean a Delonghi automatic espresso machine, a Bosch dryer, Miele and Bosch washing machines, and several other dishwashers. Usually looks really good afterwards... - Dish washers rule!
Danke sehr! Ich weiß nicht genau wieviel Stunden Arbeit es waren, aber ich vermute dass es irgendwie zwischen 30 und 40 Stunden sind. Schon eine Menge, aber dafür habe ich jetzt eine sehr tolle Maschine! ;)
Ah, never mind. I think I figured it out. They 'hold' the post that is inserted from the rear of the machine that hold the drum from moving during shipping. They aren't needed after installation. I should never have questioned Miele's German build quality! Better than a BMW!
Ja viel Arbeit... Aber lohnt sich die Maschine wird es dir danken..
I have a Miele W 149 top loader. Just replaced the bearings for the first time. A lot of work but my DIY rating is a little bit higher now :) I think it was bought new in 2002 so lasted for many years. Looks like the motor outlasts the drum.
Super Video 👍.
Wo wo du denn den Lagersatz bestellt und war das der Originale?
Tolle Arbeit die sich bei der guten alten Miele Qualität aber lohnt..
Wow!Aber du hast recht das du nun wieder ne schöne Maschine hast.
Hello, I don't know if you will respond to this but I'm doing a bearing change on a miele W 4144 and the only thing I can't find is someone actually put the spider back on the drum shaft, I was just wondering if there was a special technique for doing it please? Any info would be greatly appreciated thank you 😊👍😊
cosmo I usually first tighten a few bolts on the side of the drum. Then I tighten the ‘flywheel’ and then the rest of the bolts. Good luck! :)
Great job! But You did´nt change the ring (laufring) on the axis, right? I mean the counterpart of the radial shaft seal (time: 4:04). This ring is mostly worn out and will damage the new seal within a short time. In the original repair kit of Miele there is one included. It´s not easy to get the ring off, mostly You have to crush em - and try to keep the axle undamaged.
Schön gemacht.Sieht wieder wie neu aus.Wieviel Stunden Arbeit hast du Investiert insgesamt?
zeer mooi gedaan, veel geluk met deze prachtige miele
Hi - 2 questions -
1. what did you use to clean the stainless steel drum? Any special product?
2. at 4:32, just to the left of the yellow bucket you will see a bracket (I think it is made of hard brown plastic). What is this part for? I found at piece loose in the cabinet.
Thanks, love you (strange) videos.
2. Shock absorber attachment
Hi, wich pulley puller did you use at 1:51, mark, type? Thx
on 4:03 you didnt change or clean with sandpaper the ring where the new gasket will fit.
What is that black mark on the back of the outer shel near the place belt holds adjacent to it?
Wear from the flywheel bashing into the back of the cabinet.
Excellent job, I published a video in German language, 10 parts, bearings change on a Miele Senator 165/W935
what is the size for bearing? why the machine need 3 bearing
hi what happen to your w432? sorry i keep asking lol its just you said it broke, :)
i bet you get fed up with the same questions lol sorry
:)
great video :)
also does the w720 still work?
Not checking the spider? Why?
Super machine gute arbeit geleistet ;)
Also das Waschmittelfach war bei dieser Maschine schon so sauber.
Wenn ich aber eine Maschine mit schmutzigem Waschmittelfach bekomme, dann kommt das erstmal innen Spüler. Danach weiche ich das über Nacht ein in Salzsäure. Dann ist fast alles wieder sauber.
...needless to say: all of the above were broken before - 50% (maybe more) of broken stuff is just dirt related.
lolz hoop niet dat je niet opnieuw dat waterniveauregelaartje sloopt ;)
Strange only one gasket ? inside my old Candy formula inox have 2 !
Onee? Dit 'ding' heeft de hydromaticmotor en de twee snelheden bij het draaien; hét beruchte hydromaticsysteem!
sehr schick Bj vor 1990
Thank you! :D
Mille Grazie! (Or something like that ^^)
I would love to see you doing this loolol! Another amazing job, another great video, as usual! Thanks :)
It's not god grease to new gasket . Greetings
Sofort abonniert
We are not sdbvdf
Leuk pieterpost brandweer SamNijntje konijntje kijk maarTeletubbiesHet zandkasteel aan zeeAMENDaag tot ziens.