2019+ Macan S JB4 Install & Results

Поделиться
HTML-код
  • Опубликовано: 6 окт 2024
  • A how to guide of installing the Burger Tuning JB4 on thhe 95B.2 Macan S (2019+). We also dyno tested and ran acceleration tests.
    Learn More: flat6motorspor...
  • Авто/МотоАвто/Мото

Комментарии • 28

  • @AustinF516
    @AustinF516 Год назад +2

    Wow .9 faster 0 -60 mph just from 4 more pounds of boost!? Based on the claimed 4.6 stock and improving it to 3.7 is basically a 20% improvement in acceleration performance! I've got to imagine there isn't a better improvement per dollar mod out there for this car then that!

  • @jamesk8374
    @jamesk8374 3 года назад +3

    This video really helped with my macan jb4 install. Lots of power! Thanks again.

  • @MarkCalica
    @MarkCalica 4 года назад +7

    I'm sorry but, I will never run my wiring like that...

    • @STOPBlTCHlNG
      @STOPBlTCHlNG 2 года назад +1

      That is great for you. Why be sorry

  • @WilldaBear
    @WilldaBear 20 дней назад +1

    Is the OBD2 wire damaged at all from being at the door hinge like that?

  • @hx20303
    @hx20303 3 года назад +1

    Please do 958.2 Cayenne JB4

  • @revvedandrooted
    @revvedandrooted 27 дней назад

    Do you guys have an install video for the Panamera Turbo 4.8 V8? I just ordered mine about 10 minutes ago

  • @TplusRX
    @TplusRX Год назад

    Your video shows a TMAP sensor in an easy to access location directly below the throttle body. Unfortunately, my 2023 Macan S does not have a TMAP sensor there but instead it is in an extremely difficult location down by the intercooler with a very small opening to reach down into....absolutely impossible to access and disconnect the sensor. Any tips you can provide for this? Your video states that there are two TMAP sensors, one down by the intercooler and one in the convenient location shown in your video. I could not find a second TMAP sensor on my 2023, only the one down by the intercooler. Perhaps there is a second, easily assessible TMAP sensor that I am not seeing?
    Hoping for some kind of feedback as I am so frustrated and ready to return this JB4 and get a Cobb just for ease of install..... Sheesh!
    Thanks for any info!!

    • @Flat6Motorsports
      @Flat6Motorsports  Год назад +1

      Correct, this is on a 2019 model (3.0L single turbo) it's a completely different engine from the 2.9L in the 2023 Macan S. Feel free to send us an email with your order number and we can help you out! info@flat6motorsports.com

    • @TplusRX
      @TplusRX Год назад

      @@Flat6Motorsports I purchased directly from BMS so I will have to contact them. Thought you might be able to share some of your expertise on the TMAP Sensors for the 2.9L engine. The instructions provided by BMS are not specific to the Macan but instead reference the Audi S4 RS4/5 engine which may be the same engine, but has different sensor locations. Your install video is the only one I could find on RUclips

  • @fbrevil
    @fbrevil 4 месяца назад

    I've been thinking of installing this piggyback tune to my 2019 Macan S, but I'm concerned about how it might affect my warranty. I've heard mixed opinions-some say removing the tune before service won't make a difference, as dealers can still sniff out ECU tweaks. Any Macan owners out there who've modded without warranty headaches?

    • @Flat6Motorsports
      @Flat6Motorsports  4 месяца назад +1

      There is no way they can trace it just FYI. We’ve never heard of any issues there.

  • @rkkty6996
    @rkkty6996 3 года назад

    Very informative video !!!!

  • @DesignsByDal
    @DesignsByDal 3 года назад

    On Burger's site it says this is for the facelift models, any chance it'll also work with a pre-facelift? I was under the impression the facelift and pre-facelift S were the same motor, I could be wrong though.

    • @Flat6Motorsports
      @Flat6Motorsports  3 года назад +1

      They are different engines completely. We do have other tuning options for the 15-18 models.

  • @joshhayes3433
    @joshhayes3433 3 года назад +4

    At no point should anyone ever run wiring through the door jamb, it’s a fire hazard and cars have burned to the ground. I’m surprised to see such a thing on the official Flat 6 channel. Even if you do it personally you should tell people to do it the correct way, through the firewall.

    • @djsomeguy
      @djsomeguy 3 года назад +1

      Flat6 are a bunch of hacks...so many mistakes in their install videos.

  • @STOPBlTCHlNG
    @STOPBlTCHlNG 2 года назад

    What about on the GTS?

    • @Flat6Motorsports
      @Flat6Motorsports  2 года назад

      If we have the opportunity, we'll always test, we don't have a GTS though

  • @mcbgaming95
    @mcbgaming95 3 года назад

    So this tune runs on e85?

    • @Flat6Motorsports
      @Flat6Motorsports  3 года назад

      It can run an e35 blend and support e85 but you'll need an upgraded high pressure fuel pump to run full e85

  • @刘成坚
    @刘成坚 3 года назад

    would you ship to china?

  • @bruceeverett5372
    @bruceeverett5372 3 года назад

    Those dyno / Draggy results are from which map? Anyone, anyone, Beuler?

  • @emersonwanton1616
    @emersonwanton1616 3 года назад

    Sure burger tuner GB4 it the worse !

  • @fbrevil
    @fbrevil 4 месяца назад

    I've been thinking of installing a JB4 piggyback tune to my 2019 Macan S, but I'm concerned about how it might affect my warranty. I've heard mixed opinions-some say removing the tune before service won't make a difference, as dealers can still sniff out ECU tweaks. Any Macan owners out there who've modded without warranty headaches?