I would definitely recommend Ice Resin. I have been using the product for years and love it. The bubbles are easy to remove, it domes easily, and is very clear. Make sure though to avoid lots of direct sunlight or extreme heat, I have found that all resins will yellow a bit in those conditions. There is a blog I wrote about using 2-part resin and some of the lessons/tips I have learned and the link for it is in the video description underneath this video.
Thank you for your quick response. Yes, you have answered all of my questions. Thank you for taking the time to reply in such detail. Greatly appreciated !
@Beadaholique Easy Mold Silicone Molding Rubber for Casting is another product. This involves more work then the product above, but if you planned it out right, you could probably make a tray of molds with it. I would suggest using a long flat plastic container as your base, perhaps something like a casserole sized tupperware container.
@Beadaholique The putty hardens in 20 minutes and you have a custom mold. Since you only have a minute or so working time, it's hard to make a really large tray with say 10 or 12 objects in it. However, I have mixed a larger "blob" and flattened it with my hands to about 3/4" (depending on the depth of your items) and then pressed 4 different objects into the same blob spaced a little bit apart each.
Hi! Yes, it is possible to resin a completed acrylic painting, however I have not personally attempted it myself. I have seen it done on a canvas but more commonly I see it done when a solid piece of wood is used as the base and then painted over. I worry that a canvas might warp a little with the resin, but I have nothing to back this up other then just a "feeling". I would also try and seal the acrylic paint before putting resin on top of it.
@Beadaholique If you do not want to use a flame, you can try getting really close to the resin and breathing on it (not blowing, just a heavy hot exhale) - this does not always work but it can reduce the bubbles sometimes. A sharp sewing needle also works well, just make sure the tip is clean before you insert it into the resin.
@Beadaholique For the dust and cat hair, try covering your resin after you pour it with a lid or bowl. You do not want your cover to touch the resin, but you want to create a canopy over the top to prevent dust and debris. I use a piece of tupperware and then prop up one end slightly with just a small object so that it's not an air-tight seal, just a hovering cover.
Different resins have different levels of odors. I prefer Ice Resin because it has a lower odor then some others. It does still smell though and you will want to work in a well ventilated area.
@unconventionalsenshi If you do not have a torch, a regular barbecue lighter works great. You can usually find these at most grocery stores and even drugstores/hardware stores. A standard lighter as well will work, just quickly move the flame over the top of the resin but don't actually touch the resin. You will see the bubbles pop instantly.
Resin is a finicky medium and the dyes specifically made for resin do not upset the balance - I am afraid that acrylic paint would cause an unbalance in the formula and prevent it from curing properly. Yes, there are alternatives to a blow torch. Blowing on the resin will not help but breathing hot breath on it does pop some of the bubbles. You can also use a bbq lighter, just be careful not to burn the resin with the direct flame and take all the usual safety precautions.
@MegaJoanna1988 There is a kit with Ice Resin, stirring sticks and cups (ICE Resin Jewelers Grade Clear Casting Epoxy Resin 8 oz Kit) available on Beadaholique's website. The links for the supplies in this video are located in the video description underneath the video.
Within that inch of thickness I had about 4 layers, and when I looked at the side view, I could not see any striations - which I was pleased about. The only thing I did notice was that the resin started taking on a slight green tint when it became that thick. I hope this helps!
We sell ICE Resin on Beadaholique . com's website. The links for the supplies in this video are located in the video description underneath this video.
@WeaponsOfSeduction Making your own custom molds is definitely fun! I would recommend Easy Mold Silicone Molding Putty available on Beadaholique's website. It's not going to make a large tray, although you can make several different mold impressions in each amount you mix. So for this product, you get two containers of putty, part A and part B, and when you mix them, you then form a ball of sorts and then press your shape/item into it or push the putty around the object.
To check out how much it would cost to do a similar project, click on the links for the supplies in this video located in the video description underneath this video.
We always caution our followers to use every safety precaution possible, and if something makes you uncomfortable, do not do it. When I have personally used the torch with Ice Resin, I have not experienced any negative issues and am diligent about just sweeping the flame over the top of the resin, no putting the flame into the resin or burning it. For more detailed information on Ice Resin, please visit the manufacturers website.
Over the years it might yellow a little, especially if hung in a place that gets sunlight. I have stuck primarily to smaller objects, under 2" across. The largest piece I have made was just a test piece in an 8 x 8 mold. I wanted to see how the resin would cure in a piece such as this and how many layers I could make with embedded objects in each layer. It ended up being about an inch thick and it looked really good.
Can you tell me if you can mix a lil acrylic paint into the resin instead of dye? Also, what else can you do if you dont have a blow torch.I read somewhere that you can blow on the resin to deplete the bubbles is this true?
could you use ice resin to resin a completed acrylic painting, say a 9" by 12" canvas or 1/8 inch hard panel canvas, and if you could use it should there be a concern with yellowing over time ? I am also curious as to what is the largest piece you have completed using ice resin, and of course how it turned out. P.S. - thank you for a clear and precise translation of information in your video's. You have a gift for communicating.
I am currently using 'easy cast' resin and am considering switching to a different brand due to minuscule bubbles I can't seem to pop with my torch, yellowing in the sun, and lengthy curing times. Also, the resin becomes tacky when wet. I would love to find a resin that is crystal clear, doesn't yellow and cures quickly (possibly uv). As a professional would you recommend Ice Resin? Which brand of uv resin would you recommend? Thank you so much!
artistgirl01 You can brush on resin, just go slowly and patiently. You will need to dispose of the paint brush after you use it. This is not the easiest thing to do so I would recommend doing a few practice beads before you try to cover something that you have worked hard on.
Personally I have not found a UV resin that gives me the same results and ease-of-use as Ice Resin. I just feel that i have a lot more control with a 2-part resin.
How did you seal the image? I see you used Nunn design sealant; however that link doesn't work, so wondering if can use other sealants, like what you might use for poly clay. Thanks
Although we don't have the Nunn Design sealant, here is an alternative by Ice Resin: beadaholique.com/collections/all/products/art-mechanique-ice-resin-paper-sealant-for-collage-art-1-ounce Thanks for watching!
I tried using a heat gun and mine blew just enough air that it displaced my resin. I have heard that other people use heat guns just fine though, so I would go ahead and try it, I just found that it did not work for me.
For crystal clear resin projects I prefer Ice Resin. I have never made ear plugs before so I can't really give any advice on how to make them, sounds fun though!
Um, is this Ice Resin stuff flame proof? I have been working with traditional Polyster resin for years, and to remove small bubbles you usually just agitate the object gently. That trick with the mini torch frightens me immesurebly!
People do preserve real flowers in resin but honestly it is not a skill that I have mastered. When I have painted resin onto a real flower, the flower has collapsed in on itself. I think you need to somehow stiffen and preserve the flower first but I am not sure what product is used to do that. If you figure it out, I would love to hear!
I understand why my resin is sticky because not mixed well. But it is hard but still sticky on top. Is their anything I can use to remove the stickiness? Or is it best to throw it away? Can I also use ice resin as a top coat?
If it’s still sticky even after cured you can most definitely try a top coat of ice resin. I have done that before and had it work well. I would try that before tossing the pieces
Hi , We must offer resin -fire to accelerate the hardening process or this step can be dispensed with , and how much the ratio used for the resin A & B
Nada Mohamed Hello, I am a little unclear about the first part of your question regarding the "resin-fire to accelerate" but as for the ratio of A to B, it is exactly 50/50.
Beadaholique Directing fire to the resin Is it necessary as I watched the video And this step is working on hardening resin Or left in the open air to dry
Nada Mohamed The resin will harden on its own if left to dry in the air. The heat from the fire is only necessary to remove air bubbles to make the surface of the resin smooth.
Beadaholique How many hours needed for hardening resin .... Blending resin for two minutes and then leave for 20 minutes before use This information is correct
Nada Mohamed Blend for two minutes and leave for at least three or four minutes. This helps to remove bubbles. The resin will be workable for 30 to 40 minutes after it is blended. The resin will dry in 24 hours, and be fully hardened in three days.
+Ella Marie In theory you could use an eye dropper. I have never tried it before but I have 2 concerns: you will need to dispose of the eye dropper after you use it because there is no way to properly clean it and you might get more bubbles in the resin by transferring it to the cup and then squeezing it out the dropper.
I tried using a heat gun and mine blew just enough air that it displaced my resin. I have heard that other people use heat guns just fine though, so I would go ahead and try it, I just found that it did not work for me.
beetlebutterfly A BBQ lighter should work well for small resin projects such as this. As always, use caution with any sort of fire, and practice first on an easy piece that you won't mind turning out less than perfectly. You may need to apply the heat from the BBQ lighter just slightly longer than you would with a micro torch.
Lori Wittman You can vibrate some of the bubbles out. If you have something that vibrates, try covering it in plastic and touching it to the edge of your resin platform so the whole platform vibrates a little (just a little). I would only do this with an inexpensive vibrating object, just in case you spill resin on it somehow. A BBQ lighter also works well in place of a torch.
Linda Moore Hanssen I always mix at least 2 ounces of resin at a time - 1 ounce of part A and 1 ounce of part B. I would not recommend mixing less. Mastering 2-Part Resin - Tips and Advice www.beadersblog.com/2012/06/mastering-2-part-resin-tips-and-advice.html
HOW STRONG IS THE ODOR WHEN USED AND WHEN FULLY CURED? SOME RESINS ARE SO STRONG THEY MAKE ME SICK. AND WHEN THEY CURE THE JEWELRY HAS STRONG CHEMICAL SMELL FOR MONTHS. THANK YOU.
When working with resin, it may have a strong odor and we recommend working in a well ventilated area. Once it cures, it is fairly odorless. Thanks for watching!
I would definitely recommend Ice Resin. I have been using the product for years and love it. The bubbles are easy to remove, it domes easily, and is very clear. Make sure though to avoid lots of direct sunlight or extreme heat, I have found that all resins will yellow a bit in those conditions. There is a blog I wrote about using 2-part resin and some of the lessons/tips I have learned and the link for it is in the video description underneath this video.
Thank you for your quick response. Yes, you have answered all of my questions. Thank you for taking the time to reply in such detail. Greatly appreciated !
@Beadaholique Easy Mold Silicone Molding Rubber for Casting is another product. This involves more work then the product above, but if you planned it out right, you could probably make a tray of molds with it. I would suggest using a long flat plastic container as your base, perhaps something like a casserole sized tupperware container.
@Beadaholique The putty hardens in 20 minutes and you have a custom mold. Since you only have a minute or so working time, it's hard to make a really large tray with say 10 or 12 objects in it. However, I have mixed a larger "blob" and flattened it with my hands to about 3/4" (depending on the depth of your items) and then pressed 4 different objects into the same blob spaced a little bit apart each.
Hi! Yes, it is possible to resin a completed acrylic painting, however I have not personally attempted it myself. I have seen it done on a canvas but more commonly I see it done when a solid piece of wood is used as the base and then painted over. I worry that a canvas might warp a little with the resin, but I have nothing to back this up other then just a "feeling". I would also try and seal the acrylic paint before putting resin on top of it.
@Beadaholique If you do not want to use a flame, you can try getting really close to the resin and breathing on it (not blowing, just a heavy hot exhale) - this does not always work but it can reduce the bubbles sometimes. A sharp sewing needle also works well, just make sure the tip is clean before you insert it into the resin.
Hello, I am glad to confirm we ship to Hong Kong.
@Beadaholique For the dust and cat hair, try covering your resin after you pour it with a lid or bowl. You do not want your cover to touch the resin, but you want to create a canopy over the top to prevent dust and debris. I use a piece of tupperware and then prop up one end slightly with just a small object so that it's not an air-tight seal, just a hovering cover.
Different resins have different levels of odors. I prefer Ice Resin because it has a lower odor then some others. It does still smell though and you will want to work in a well ventilated area.
@unconventionalsenshi If you do not have a torch, a regular barbecue lighter works great. You can usually find these at most grocery stores and even drugstores/hardware stores. A standard lighter as well will work, just quickly move the flame over the top of the resin but don't actually touch the resin. You will see the bubbles pop instantly.
Resin is a finicky medium and the dyes specifically made for resin do not upset the balance - I am afraid that acrylic paint would cause an unbalance in the formula and prevent it from curing properly. Yes, there are alternatives to a blow torch. Blowing on the resin will not help but breathing hot breath on it does pop some of the bubbles. You can also use a bbq lighter, just be careful not to burn the resin with the direct flame and take all the usual safety precautions.
@MegaJoanna1988 There is a kit with Ice Resin, stirring sticks and cups (ICE Resin Jewelers Grade Clear Casting Epoxy Resin 8 oz Kit) available on Beadaholique's website. The links for the supplies in this video are located in the video description underneath the video.
Within that inch of thickness I had about 4 layers, and when I looked at the side view, I could not see any striations - which I was pleased about. The only thing I did notice was that the resin started taking on a slight green tint when it became that thick. I hope this helps!
We sell ICE Resin on Beadaholique . com's website. The links for the supplies in this video are located in the video description underneath this video.
@WeaponsOfSeduction Making your own custom molds is definitely fun! I would recommend Easy Mold Silicone Molding Putty available on Beadaholique's website. It's not going to make a large tray, although you can make several different mold impressions in each amount you mix. So for this product, you get two containers of putty, part A and part B, and when you mix them, you then form a ball of sorts and then press your shape/item into it or push the putty around the object.
To check out how much it would cost to do a similar project, click on the links for the supplies in this video located in the video description underneath this video.
We always caution our followers to use every safety precaution possible, and if something makes you uncomfortable, do not do it. When I have personally used the torch with Ice Resin, I have not experienced any negative issues and am diligent about just sweeping the flame over the top of the resin, no putting the flame into the resin or burning it. For more detailed information on Ice Resin, please visit the manufacturers website.
Over the years it might yellow a little, especially if hung in a place that gets sunlight. I have stuck primarily to smaller objects, under 2" across. The largest piece I have made was just a test piece in an 8 x 8 mold. I wanted to see how the resin would cure in a piece such as this and how many layers I could make with embedded objects in each layer. It ended up being about an inch thick and it looked really good.
Love this. Can you use a heat gun for embossing opposed to a torch? Thank you!
Can you tell me if you can mix a lil acrylic paint into the resin instead of dye? Also, what else can you do if you dont have a blow torch.I read somewhere that you can blow on the resin to deplete the bubbles is this true?
could you use ice resin to resin a completed acrylic painting, say a 9" by 12" canvas or 1/8 inch hard panel canvas, and if you could use it should there be a concern with yellowing over time ? I am also curious as to what is the largest piece you have completed using ice resin, and of course how it turned out. P.S. - thank you for a clear and precise translation of information in your video's. You have a gift for communicating.
I am currently using 'easy cast' resin and am considering switching to a different brand due to minuscule bubbles I can't seem to pop with my torch, yellowing in the sun, and lengthy curing times. Also, the resin becomes tacky when wet. I would love to find a resin that is crystal clear, doesn't yellow and cures quickly (possibly uv). As a professional would you recommend Ice Resin? Which brand of uv resin would you recommend? Thank you so much!
I have not used resin before. Will it smell? Do you need a well ventilated area?
Can you use a UV light on the 2 part resin? If so how long for drying?
Hi, can you use a brush with the ice resin. I want to cover polymer clay beads.
artistgirl01 You can brush on resin, just go slowly and patiently. You will need to
dispose of the paint brush after you use it. This is not the easiest
thing to do so I would recommend doing a few practice beads before you
try to cover something that you have worked hard on.
Can it be used on steel tumblers ??
Personally I have not found a UV resin that gives me the same results and ease-of-use as Ice Resin. I just feel that i have a lot more control with a 2-part resin.
How did you seal the image? I see you used Nunn design sealant; however that link doesn't work, so wondering if can use other sealants, like what you might use for poly clay. Thanks
Although we don't have the Nunn Design sealant, here is an alternative by Ice Resin: beadaholique.com/collections/all/products/art-mechanique-ice-resin-paper-sealant-for-collage-art-1-ounce
Thanks for watching!
I tried using a heat gun and mine blew just enough air that it displaced my resin. I have heard that other people use heat guns just fine though, so I would go ahead and try it, I just found that it did not work for me.
Can one use a blow dryer instead the a torch?
Why don't you get the measuring cups with the ice resin?? Or mixing sticks
Hello, which resin is best for making ear plugs? I want to begin making them, and if course want them clear. thank you
For crystal clear resin projects I prefer Ice Resin. I have never made ear plugs before so I can't really give any advice on how to make them, sounds fun though!
Thank you, I will give that a try.
hi i wanna ask that can i buy it from the given website but send it to hk? thanks
Um, is this Ice Resin stuff flame proof? I have been working with traditional Polyster resin for years, and to remove small bubbles you usually just agitate the object gently. That trick with the mini torch frightens me immesurebly!
can i use this to preserve my real rose?
if so, how can i do it? should i use a paint brush?
People do preserve real flowers in resin but honestly it is not a skill that I have mastered. When I have painted resin onto a real flower, the flower has collapsed in on itself. I think you need to somehow stiffen and preserve the flower first but I am not sure what product is used to do that. If you figure it out, I would love to hear!
I understand why my resin is sticky because not mixed well.
But it is hard but still sticky on top. Is their anything I can use to remove the stickiness? Or is it best to throw it away?
Can I also use ice resin as a top coat?
If it’s still sticky even after cured you can most definitely try a top coat of ice resin. I have done that before and had it work well. I would try that before tossing the pieces
Ok that’s great thank you. X
Hi , We must offer resin -fire to accelerate the hardening process or this step can be dispensed with , and how much the ratio used for the resin A & B
Nada Mohamed Hello, I am a little unclear about the first part of your question regarding the "resin-fire to accelerate" but as for the ratio of A to B, it is exactly 50/50.
Beadaholique Directing fire to the resin Is it necessary as I watched the video
And this step is working on hardening resin
Or left in the open air to dry
Nada Mohamed The resin will harden on its own if left to dry in the air. The heat from the fire is only necessary to remove air bubbles to make the surface of the resin smooth.
Beadaholique How many hours needed for hardening resin ....
Blending resin for two minutes and then leave for 20 minutes before use
This information is correct
Nada Mohamed Blend for two minutes and leave for at least three or four minutes. This helps to remove bubbles. The resin will be workable for 30 to 40 minutes after it is blended. The resin will dry in 24 hours, and be fully hardened in three days.
Do you recommend using it on costume jewelry?
Yes, resin projects are usually considered to be costume jewelry.
Thanks. I want to use it to coat costume jewelry that i already have to protect it from fading.
can we use an eye dropper to get the resin into the image
+Ella Marie In theory you could use an eye dropper. I have never tried it before but I have 2 concerns: you will need to dispose of the eye dropper after you use it because there is no way to properly clean it and you might get more bubbles in the resin by transferring it to the cup and then squeezing it out the dropper.
Do they come in sizes like a gallon? Because i only see sizes like 1,16, and 18 oz on the internet.
We sell both Easy Cast Clear Casting and Envirotex Lite Pour-On in 1 Gallons.
Beadaholique ty
Also can i use a heat gun instead of the torch?
I tried using a heat gun and mine blew just enough air that it displaced my resin. I have heard that other people use heat guns just fine though, so I would go ahead and try it, I just found that it did not work for me.
Beadaholique Ty i will be looking for one with adjustable settings then.
It specifically says in the Ice Resin instructions NOT to use heat of any kind.
Is it possible to use a BBQ lighter as a substitute to remove the bubbles?
beetlebutterfly A BBQ lighter should work well for small resin projects such as this. As always, use caution with any sort of fire, and practice first on an easy piece that you won't mind turning out less than perfectly. You may need to apply the heat from the BBQ lighter just slightly longer than you would with a micro torch.
+Beadaholique Thank you :)
Do you have any other way to get rid of the bubbles besides using a torch??
Lori Wittman You can vibrate some of the bubbles out. If you have something that vibrates, try covering it in plastic and touching it to the edge of your resin platform so the whole platform vibrates a little (just a little). I would only do this with an inexpensive vibrating object, just in case you spill resin on it somehow. A BBQ lighter also works well in place of a torch.
Very good thank you!
I got mine this morning xD
ice resin is the same to eproxy resin?
I can confirm Ice Resin is epoxy resin. Thanks for watching!
What is the least amount you can mix without having issues?
Linda Moore Hanssen I always mix at least 2 ounces of resin at a time - 1 ounce of part A and 1 ounce of part B. I would not recommend mixing less.
Mastering 2-Part Resin - Tips and Advice
www.beadersblog.com/2012/06/mastering-2-part-resin-tips-and-advice.html
Thank you for responding..
Using a UV light on 2 part resin will not help it cure any faster.
tried a kilm for potery?
HOW STRONG IS THE ODOR WHEN USED AND WHEN FULLY CURED? SOME RESINS ARE SO STRONG THEY MAKE ME SICK. AND WHEN THEY CURE THE JEWELRY HAS STRONG CHEMICAL SMELL FOR MONTHS. THANK YOU.
When working with resin, it may have a strong odor and we recommend working in a well ventilated area. Once it cures, it is fairly odorless. Thanks for watching!
Don't whisk the bubbles in when you mix. >
Doesn't ICE resin turn yellowish over time?????
...whoops...sorry!..it should say: '...of a torch..'